HUAWEI-ENTITY-EXTENT-MIB

1.3.6.1.4.1.2011.5.25.31.1.1.36.1

hwAlarmResendInterval

Integer32

read-write

This object implements the function of the set alarm resend interval command to set the alarm interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.3.1

hwDevicePowerInfoTotalPower

Integer32

Read-only

This object indicates the total power of the system. The value is the integer portion of the actual power.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.3.2

hwDevicePowerInfoUsedPower

Integer32

Read-only

This object indicates the current power of the system. The value is the integer portion of the actual power.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.6.1

hwEntitySystemNetID

OCTET STRING

read-write

Network element ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.6.5

hwEntitySystemModel

OCTET STRING (SIZE (0..255))

Read-only

This object indicates a device type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.7.1.1

hwEntityHeartbeatOnOff

INTEGER

read-write

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.7.1.2

hwEntityHeartbeatPeriod

Integer32

The value ranges from 60 to 86400(s).

read-write

Heartbeat sending period detected in the trap reporting channel, with the minimum value of 60 seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.308.1.1.1

hwDetectEngineOAMEnable

INTEGER{enabled(1),disabled(2)}

read-write

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.1.14

hwEntityExtTrapBoardDropRuntPktStatistics

INTEGER (0..18446744073709551615)

accessible-for-notify

This object indicates the number of dropped packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.1.15

hwEntityExtTrapBoardDropRuntPktTimeInterval

Integer32

accessible-for-notify

This object indicates the interval at which statistics about dropped packets are collected.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1

hwEntityAdminStatus

INTEGER{notSupported(1),locked(2),shuttingDown(3),unlocked(4),up(11),down(12),loopback(13)}

Read-write

This object indicates the management status of the entity:

• 1: notSupported
• 2: locked
• 3: shuttingDown
• 4: unlocked

Default value: 4

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2

hwEntityOperStatus

INTEGER{notSupported(1),disabled(2),enabled(3),offline(4),up(11),down(12),connect(13),protocolUp(15),linkUp(16),linkDown(17),present(18),absent(19)}

Read-only

This object indicates the operating status of the entity:

• 1: notSupported
• 2: disabled
• 3: enabled
• 4: offline

Default value: 3

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3

hwEntityStandbyStatus

INTEGER{notSupported(1),hotStandby(2),coldStandby(3),providingService(4)}

Read-only

This object indicates the backup status of the entity:

• 1: notSupported
• 2: hotStandby
• 3: coldStandby
• 4: providingService

Default value: 1

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5

hwEntityCpuUsage

Integer32

Read-only

This object indicates the CPU usage of the entity.

Value range: 2-100

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6

hwEntityCpuUsageThreshold

Integer32

Read-write

This object indicates the upper threshold for the CPU usage of the entity.

Value range: 2-100

Default value: 80

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7

hwEntityMemUsage

Integer32

Read-only

This object indicates the memory usage of the entity.

Value range: 0-100

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8

hwEntityMemUsageThreshold

Integer32

This object indicates the memory usage threshold of the entity. Value range: 75-100

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9

hwEntityMemSize

Integer32

Read-only

This object indicates the memory capacity of the entity, in bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10

hwEntityUpTime

Integer32

Read-only

This object indicates the time to start the entity, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11

hwEntityTemperature

Integer32

Read-only

This object indicates the highest entity temperature displayed in the sensor, in °C.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12

hwEntityTemperatureThreshold

Integer32

Read-write

This object indicates the upper threshold of the entity temperature, in °C.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13

hwEntityVoltage

Integer32

Read-only

This object indicates the voltage of the entity, in mV.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14

hwEntityVoltageLowThreshold

Integer32

Read-write

This object indicates the lower threshold of the entity voltage, in mV.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15

hwEntityVoltageHighThreshold

Integer32

Read-write

This object indicates the upper threshold of the entity voltage, in mV.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16

hwEntityTemperatureLowThreshold

Integer32

Read-write

This object indicates the lower temperature threshold of the entity, in °C.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19

hwEntityMemSizeMega

Integer32

Read-only

This object indicates the memory capacity of the entity, in M.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.29

hwEntityCpuMaxUsage

Integer32

Read-only

This object indicates the max CPU usage of the entity.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.43

hwEntityBoardName

OCTET STRING

Read-only

This object indicates the entity name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.47

hwEntitySplitAttribute

OCTET STRING

read-only

This object indicates the port name before port split.

If no port name is displayed, this port is not a split port.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.64

hwEntityMPUType

OCTET STRING

read-only

This object indicates the abbreviation for the MPU type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.1

hwEntityBomId

OCTET STRING (SIZE (0..255))

read-only

BOM ID used to identify the entity.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.2

hwEntityBomEnDesc

OCTET STRING (SIZE (0..255))

read-only

Description of the BOM in English.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.4

hwEntityManufacturedDate

OCTET STRING (SIZE (8 | 11))

read-only

Production date of the entity.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.6

hwEntityCLEICode

OCTET STRING (SIZE (0..255))

read-only

Common Language Equipment Identification (CLEI) code of the entity.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.8

hwEntityArchivesInfoVersion

OCTET STRING (SIZE (0..255))

read-only

Archive information version of the entity.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.9

hwEntityOpenBomId

OCTET STRING (SIZE (0..255))

read-only

Allocated BOM ID, which is different from the hwEntityBomID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.10

hwEntityIssueNum

OCTET STRING (SIZE (0..255))

read-only

Issue number of the hardware modification.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.11

hwEntityBoardType

OCTET STRING (SIZE (0..255))

read-only

Board type of the entity.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.12

hwEntityExInfo

OCTET STRING (SIZE (0..255))

read-only

Entity extension information.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.2.1.13

hwEntityModel

OCTET STRING (SIZE (0..255))

read-only

Entity external model.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.1

hwEntityOpticalMode

Integer32

read-only

This object indicates the single-mode or multimode of an optical module.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.4

hwEntityOpticalVendorSn

OCTET STRING

Read-only

This object indicates the SN of the optical module.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5

hwEntityOpticalTemperature

Integer32

Read-only

This object indicates the temperature of the optical module (unit: °C).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6

hwEntityOpticalVoltage

Integer32

Read-only

This object indicates the voltage of the optical module (unit: mV).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7

hwEntityOpticalBiasCurrent

Integer32

Read-only

This object indicates the bias current of the optical module (unit: uA).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8

hwEntityOpticalRxPower

Integer32

Read-only

This object indicates the input power of the optical module (unit: uW).

The unit of this object defined in the MIB is dBm, but the actual unit of the value read through this object is uW. The conversion between the two units is uW = (10^(dBm/10)) x 1000.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9

hwEntityOpticalTxPower

Integer32

Read-only

This object indicates the transmit power of the optical module (unit: uW).

The unit of this object defined in the MIB is dBm, but the actual unit of the value read through this object is uW. The conversion between the two units is uW = (10^(dBm/10)) x 1000.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.10

hwEntityOpticalType

Integer32

read-only

This object indicates the optical module type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.11

hwEntityOpticalTransBW

Integer32

read-only

This object indicates the maximum bandwidth of the optical module transceiver, in Mbps.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.13

hwEntityOpticalRxLowThreshold

Integer32

read-only

This object indicates the lower alarm threshold for the receive power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.14

hwEntityOpticalRxHighThreshold

Integer32

read-only

This object indicates the upper alarm threshold for the receive power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.15

hwEntityOpticalTxLowThreshold

Integer32

read-only

This object indicates the lower alarm threshold for the transmit power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.16

hwEntityOpticalTxHighThreshold

Integer32

read-only

This object indicates the upper alarm threshold for the transmit power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.18

hwEntityOpticalDirectionType

INTEGER

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.20

hwEntityOpticalRxLowWarnThreshold

Integer32

read-only

This object indicates the lower warning threshold for the receive power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.21

hwEntityOpticalRxHighWarnThreshold

Integer32

read-only

This object indicates the upper warning threshold for the receive power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.22

hwEntityOpticalTxLowWarnThreshold

Integer32

read-only

This object indicates the lower warning threshold for the transmit power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.23

hwEntityOpticalTxHighWarnThreshold

Integer32

read-only

This object indicates the higher warning threshold for the transmit power of optical modules, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.24

hwEntityOpticalVenderName

OCTET STRING (SIZE (1..64))

read-only

This object indicates the manufacturer name of an optical module.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.25

hwEntityOpticalVenderPn

OCTET STRING

Read-only

This object indicates the PN of an optical module.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.31

hwEntityOpticalLaneBiasCurrent

OCTET STRING

Read-only

This object indicates the optical module bias current of multiple fibers (unit: mA).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.32

hwEntityOpticalLaneRxPower

OCTET STRING

Read-only

This object indicates the optical module input power of multiple fibers (unit: dBm).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.33

hwEntityOpticalLaneTxPower

OCTET STRING

Read-only

This object indicates the optical module transmit power of multiple fibers (unit: dBm).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.45

hwEntityOpticalTransferDistance

OCTET STRING (SIZE (0..255))

read-only

This object indicates the transmission distance of optical modules.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.47

hwEntityOpticalWaveLengthExact

OCTET STRING (SIZE (1..64))

read-only

This object indicates the wavelength of optical modules (unit: nm).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.50

hwEntityOpticalTempLowThreshold

Integer32

read-only

This object indicates the lower temperature threshold of optical modules.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.51

hwEntityOpticalTempHighThreshold

Integer32

read-only

This object indicates the upper temperature threshold of optical modules.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.52

hwEntityOpticalVoltLowThreshold

Integer32

read-only

This object indicates the lower voltage threshold of optical modules.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.53

hwEntityOpticalVoltHighThreshold

Integer32

read-only

This object indicates the upper voltage threshold of optical modules.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.54

hwEntityOpticalBiasLowThreshold

Integer32

read-only

This object indicates the lower bias current threshold of optical modules (unit: uA).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.55

hwEntityOpticalBiasHighThreshold

Integer32

read-only

This object indicates the upper bias current threshold of optical modules (unit: uA).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.57

hwEntityOpticalSupportDDM

INTEGER

read-only

This object indicates whether optical modules support Digital Diagnostic Monitoring (DDM):

• 1: support(0)
• 2: notSupport(1)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.6.1.1

HwEntPowerUsedInfoBoardName

OCTET STRING

Read-only

Entity name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.6.1.2

HwEntPowerUsedInfoBoardType

OCTET STRING

Read-only

Entity type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.6.1.3

HwEntPowerUsedInfoBoardSlot

Integer32

Read-only

ID of the slot where the entity is located.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.6.1.4

HwEntPowerUsedInfoPower

Integer32

Read-only

Power of the entity. The value is the integer portion of the actual power.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.10.1.1

hwEntityFanSlot

Integer32

Read-only

This object indicates the slot ID of the fan module.

The maximum access to this object is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.10.1.2

hwEntityFanSn

Integer32

Read-only

This object indicates the index of a fan.

The maximum access to this object is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.10.1.3

hwEntityFanReg

Read-only

This object indicates that whether a fan has registered.

The maximum access to this object is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.10.1.4

hwEntityFanSpdAdjMode

Read-only

This object indicates the fan speed adjustment mode.

The maximum access to this object is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.10.1.5

hwEntityFanSpeed

Integer32

Read-only

This object indicates the fan speed.

The maximum access to this object is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.10.1.6

hwEntityFanPresent

INTEGER

• present(1)
• absent(2)

Read-only

This object indicates whether a fan is installed in the slot.

The maximum access to this object is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.10.1.7

hwEntityFanState

INTEGER

• normal(1)
• abnormal(2)

Read-only

This object indicates the running status of a fan.

The maximum access to this object is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.14.1.1

hwSystemPowerDeviceID

Integer32

Read-only

This object indicates the device ID of a stacked device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.14.1.2

hwSystemPowerTotalPower

Integer32

Read-only

This object indicates the total power of the system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.14.1.3

hwSystemPowerUsedPower

Integer32

Read-only

This object indicates the power consumed by the system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.14.1.4

hwSystemPowerRemainPower

Integer32

Read-only

This object indicates the remaining power of the system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.1.1.18.1.1

hwEntityPwrSlot

Integer32

read-only

This object indicates the slot ID of a power module.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.18.1.2

hwEntityPwrSn

Integer32

read-only

This object indicates the ID of a power module.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.18.1.6

hwEntityPwrState

INTEGER

read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.5.3.1.1

hwFileGeneIndex

Integer32(1-2147483647)

Not-accessible

This object specifies an operation index.

Currently, the value of this object ranges from 0 to 65534.

1.3.6.1.4.1.2011.5.25.31.5.3.1.2

hwFileGeneOperState

Integer32

Read-only

This object indicates the status of an operation.

• opInProgress(1)
• opSuccess(2)
• opGetFileError(3)
• opInvalidDestName(4)
• opNoFlashSpace(5)
• opWriteFileError(6)
• opDestoryError(7)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.5.3.1.3

hwFileGeneResourceType

Integer32

Read-write

This object indicates the type of the file to obtain.

• pnpcard(1)
• pnpsubcard(2)
• pnphardcapability(3)
• pnpPreDisposeCapability(4)
• pnpframe(5)
• pnpdevtype(6)
• pnpalarm(7)

Currently, this object supports only the following file types: pnpcard(1), pnpsubcard(2), pnpframe(5), and pnpdevtype(6).

1.3.6.1.4.1.2011.5.25.31.5.3.1.4

hwFileGeneResourceID

OctetString (0-255)

Read-write

This object indicates a hardware availability file ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.5.3.1.5

hwFileGeneDestinationFile

OctetString (0-255)

Read-write

This object indicates the path to save the obtained file.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.5.3.1.6

hwFileGeneRowStatus

Integer32

Read-create

This object indicates the row status.

• active(1)
• notInService(2)
• notReady(3)
• createAndGo(4)
• createAndWait(5)
• destroy(6)

Currently, the row status can only be createAndGo(4) or destroy(6).

1.3.6.1.4.1.2011.5.25.31.2.2.1

hwBoardSoftwareVersionIncompatible

This object indicates that the version running on a service card is incompatible with that on the MPU.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.7.2.1

hwEntityHeartbeatTrap

NA

This object indicates a heartbeat trap.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.8

hwEntityHigErrorPacketThresholdAlarm

• hwEntityExtTrapBoardSlotID
• hwEntityExtTrapUnitID
• hwEntityExtTrapHigPortID
• hwEntityExtTrapPeerBoardSlotID
• hwEntityExtTrapErrorPacketStatistics
• hwEntityExtTrapErrorPacketThreshold
• hwEntityExtTrapMonitorInterval

This object indicates that total number of error packets on an HG channel or CSS port has exceeded the alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.14

hwEntityHigDiscardPacketNotify

• hwEntityExtTrapBoardSlotID
• hwEntityExtTrapUnitID
• hwEntityExtTrapHigPortID
• hwEntityExtTrapPeerBoardSlotID
• hwEntityExtTrapDiscardNumber
• hwEntityExtTrapThreshold
• hwEntityExtTrapInterval

An alarm is generated when the number of packets discarded on an HG channel due to congestion within 300s reaches 300.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.9

hwEntityHigStateChangeNotify

• hwEntityExtTrapBoardSlotID
• hwEntityExtTrapUnitID
• hwEntityExtTrapHigPortID
• hwEntityExtTrapPeerBoardSlotID
• hwEntityExtTrapHigStateChangeTimes

The HG channel state has changed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.10

hwEntityHigStateDownNotify

• hwEntityExtTrapBoardSlotID
• hwEntityExtTrapUnitID
• hwEntityExtTrapHigPortID
• hwEntityExtTrapPeerBoardSlotID
• hwEntityExtTrapMonitorInterval

The HG channel state remains Down.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.3

hwEntityInputRateThresholdAlarm

The inbound bandwidth on the channel of the board exceeds the alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.4

hwEntityInputRateThresholdAlarmResume

The inbound bandwidth on the channel of the board falls below the alarm recovery threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.5

hwEntityOutputRateThresholdAlarm

The outbound bandwidth usage on the channel of the board exceeds the alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.6

hwEntityOutputRateThresholdAlarmResume

The channel bandwidth usage on the channel of the board falls below the alarm recovery threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.31.2.2.13

hwBoardDropRuntPacketNotify

• entPhysicalName
• hwEntityExtTrapBoardDropRuntPktStatistics
• hwEntityExtTrapBoardDropRuntPktTimeInterval

An alarm is generated when some packets of 64 to 86 bytes or 145 to 193 bytes, which are forwarded by a card at the line rate, are lost.

This object is implemented as defined in the corresponding MIB file.