HUAWEI-IPSESSION-MIB

1.3.6.1.4.1.2011.5.25.184.1.1.1.1

hwIpSessIfCfgIfIndex

Integer

Not-accessible

IP Session interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.11

hwIpSessIfCfgAuthDomain

Octet String

Read-write

This object indicates the default authentication domain on the interface where the IP session is configured. The value is a string of 1 to 64 characters. The default pre-authentication domain is default.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.12

hwIpSessIfCfgNasPortType

Integer

Read-write

This object indicates type of the access interface. The values and meanings are as follows:

• 0: Async
• 1: Sync
• 2: ISDN Sync
• 3: ISDN Async V.120
• 4: ISDN Async V.110
• 5: virtual interface
• 6: Personal Handyphone System Internet Access Forum Standard (PIAFS)
• 7: HDLC
• 8: X.25
• 9: X.75
• 10: G.3 Fax
• 11: Symmetric DSL (SDSL)
• 12: Asymmetric DSL, Carrierless Amplitude Phase Modulation (ADSL-CAP)
• 13: Asymmetric DSL, Discrete Multi-Tone (ADSL-DMT)
• 14: ISDN Digital Subscriber Line (IDSL)
• 15: Ethernet (default)
• 16: Digital Subscriber Line of unknown type (xDSL)
• 17: cable
• 18: wireless-other
• 19: wireless-IEEE 802.11

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.13

hwIpSessIfCfgArpInterval

Integer

Read-write

This object indicates the ARP probe interval. The value ranges from 0 to 120. The default interval is 30 seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.14

hwIpSessIfCfgArpFailTimes

Integer

Read-write

This object indicates the maximum number of ARP probe failures. The value ranges from 2 to 10. The default value is 5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.15

hwIpSessIfCfgOption82Policy

Object

Read-only

This object indicates the policy of handling Option 82.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.16

hwIpSessIfCfgServicePolicy

Integer

Read-write

This object indicates the service policy of the user. The values are as follows:

• default(1)
• option60(2)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.17

hwIpSessIfCfgVpn

Octet String

Read-write

This object indicates the VPN instance that the user belongs to. The value is a string of 1 to 31 characters. The VPN instance must already exist.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.18

hwIpSessIfCfgIpSessionEnable

Integer

Read-write

This object is used to enable the IP session service. The values are as follows:

• disable(1)
• enable(2)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.1.1.51

hwIpSessIfCfgRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.2.1.11

hwIpSessUserPasswordType

Integer

Read-write

This object indicates the password type of a DHCP user. The values are as follows:

• simple(1)
• cipher(2)

The default value is simple.

Only the Get operation is supported, but Set operation is not supported.

1.3.6.1.4.1.2011.5.25.184.1.2.1.12

hwIpSessUserPassword

Octet String

Read-write

This object indicates the password of a DHCP user. The value is a string of 0 to 128 characters.

Only the Get operation is supported, but Set operation is not supported. The return value of Get operation is *****.

1.3.6.1.4.1.2011.5.25.184.1.2.1.13

hwIpSessUserNameOption82

Integer

Read-write

This object indicates whether the DHCP packet contains Option 82. The values are as follows:

• none(1)
• first(2)
• second(3)
• third(4)
• fourth(5)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.2.1.14

hwIpSessUserNameIP

Integer

Read-write

This object indicates whether the DHCP packet contains the IP address of the user. The values are as follows:

• none(1)
• first(2)
• second(3)
• third(4)
• fourth(5)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.2.1.15

hwIpSessUserNameSysName

Integer

Read-write

This object indicates whether the DHCP packet contains the system name. The values are as follows:

• none(1)
• first(2)
• second(3)
• third(4)
• fourth(5)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.184.1.2.1.16

hwIpSessUserNameMac

Integer

Read-write

This object indicates whether the DHCP packet contains the MAC address of the user. The values are as follows:

• none(1)
• first(2)
• second(3)
• third(4)
• fourth(5)

This object is implemented as defined in the corresponding MIB files.