HUAWEI-DHCPR-MIB

S12700 and S12700E V200R019C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

HUAWEI-DHCPR-MIB

Functions Overview

HUAWEI-DHCPR-MIB is a private MIB of Huawei. The MIB is used to implement and manage DHCP relay function, including configuring the IP relay address of DHCP relay and selecting the DHCP service mode.

The OID of the root objects is:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDhcp(7).hwDHCPRelayMib(1).hwDHCPRelayMibObject(1)

Relationships Between Tables

None.

Description of Single Objects

hwDHCPRelayCycleStatus

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.3	hwDHCPRelayCycleStatus	Integer32	Read-write	Status of DHCP relay cycle mode: on(0): enable off(1): disable	This object is implemented as defined in the corresponding MIB files.

hwDHCPRRxBadPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.4	hwDHCPRRxBadPktNum	Integer32	Read-only	The value of this object identifies the total number of error packets received by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRRxServerPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.5	hwDHCPRRxServerPktNum	Integer32	Read-only	The value of this object identifies the total number of packets received by the DHCP relay from the DHCP server.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRTxServerPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.6	hwDHCPRTxServerPktNum	Integer32	Read-only	The value of this object identifies the total number of packets sent by the DHCP relay to the DHCP server.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRRxClientPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.7	hwDHCPRRxClientPktNum	Integer32	Read-only	The value of this object identifies the total number of packets received by the DHCP relay from the DHCP client.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRTxClientPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.8	hwDHCPRTxClientPktNum	Integer32	Read-only	The value of this object identifies the total number of packets sent by the DHCP relay to the DHCP client.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRTxClientUniPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.9	hwDHCPRTxClientUniPktNum	Integer32	Read-only	The value of this object identifies the total number of unicast packets sent by the DHCP client to the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRTxClientBroPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.10	hwDHCPRTxClientBroPktNum	Integer32	Read-only	The value of this object identifies the total number of broadcast packets sent by the DHCP client to the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayDiscoverPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.11	hwDHCPRelayDiscoverPktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Discover packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayRequestPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.12	hwDHCPRelayRequestPktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Request packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayDeclinePktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.13	hwDHCPRelayDeclinePktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Decline packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayReleasePktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.14	hwDHCPRelayReleasePktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Release packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayInformPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.15	hwDHCPRelayInformPktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Inform packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayOfferPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.16	hwDHCPRelayOfferPktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Offer packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayAckPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.17	hwDHCPRelayAckPktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Ack packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayNakPktNum

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.18	hwDHCPRelayNakPktNum	Integer32	Read-only	The value of this object identifies the number of DHCP Nak packets processed by the DHCP relay.	This object is implemented as defined in the corresponding MIB files.

hwDHCPRelayStatisticsReset

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.19	hwDHCPRelayStatisticsReset	INTEGER {invalid(0),reset(1)}	Read-write	The value of this object identifies whether to reset the statistics on the packets handled by the DHCP relay. The value reset(1) indicates that statistics are cleared.	This object is implemented as defined in the corresponding MIB files.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.7.1.1.19

hwDHCPRelayStatisticsReset

INTEGER {invalid(0),reset(1)}

Read-write

The value of this object identifies whether to reset the statistics on the packets handled by the DHCP relay.

The value reset(1) indicates that statistics are cleared.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

hwDHCPRIPTable

The table describes IP relay addresses configured on the DHCP relay. The IP addresses are IP addresses of DHCP servers. You can view the IP addresses of DHCP servers by using this table.

The indexes of this table are ifIndex and hwDHCPRIPAddr.

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.1.1.1	hwDHCPRIPAddr	OCTET STRING (SIZE (4))	Read-only	This object indicates the IP relay address of DHCP relay. The IP relay address of DHCP relay is the IP address of the DHCP server.	This object is implemented as defined in the corresponding MIB files.
1.3.6.1.4.1.2011.5.7.1.1.1.1.2	hwDHCPRIPRowStatus	INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}	Read-create	This object indicates the status of rows in this table. Currently, only three actions are used: active(1), createAndGo(4), destroy(6).	This object is implemented as defined in the corresponding MIB files.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.7.1.1.1.1.1

hwDHCPRIPAddr

OCTET STRING (SIZE (4))

Read-only

This object indicates the IP relay address of DHCP relay. The IP relay address of DHCP relay is the IP address of the DHCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.1.1.1.1.2

hwDHCPRIPRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the status of rows in this table.

Currently, only three actions are used: active(1), createAndGo(4), destroy(6).

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The new IP relay address of the DHCP relay can be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwDHCPRSeletAllocateModeTable

This table describes the allocation modes of DHCP services.

The index of this table is ifIndex.

OID	Object	Syntax	Max Access	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.1.2.1.1	hwDHCPRSelectAllocateMode	INTEGER{global(0), interface(1), relay(2)} INTEGER{global(0), interface(1), relay(2), none(3), globalAndRelay(4), interfaceAndRelay(5)}	Read-write	The value of this object identifies the address allocation mode of the DHCP server. The values are as follows: global(0): indicates that the DHCP server allocates addresses based on a global address pool. interface(1): indicates that the DHCP server allocates addresses based on an interface address pool. relay(2): indicates that the DHCP server allocates addresses through a DHCP relay. none(3): indicates that no allocation mode is configured for the DHCP server. globalAndRelay(4): indicates that the DHCP server allocates IP addresses from a global address pool. If IP addresses cannot be allocated from the global address pool, the DHCP relay agent relays requests of DHCP clients to the DHCP server. interfaceAndRelay(5): indicates that the DHCP server allocates IP addresses from an interface address pool. If this fails, the request is relayed to the DHCP server and the DHCP server will allocate addresses.	Only global(0), interface(1) and relay(2) are supported.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.7.1.1.2.1.1

hwDHCPRSelectAllocateMode

INTEGER{global(0), interface(1), relay(2)}

INTEGER{global(0), interface(1), relay(2), none(3), globalAndRelay(4), interfaceAndRelay(5)}

Read-write

The value of this object identifies the address allocation mode of the DHCP server.

The values are as follows:

global(0): indicates that the DHCP server allocates addresses based on a global address pool.
interface(1): indicates that the DHCP server allocates addresses based on an interface address pool.
relay(2): indicates that the DHCP server allocates addresses through a DHCP relay.
none(3): indicates that no allocation mode is configured for the DHCP server.
globalAndRelay(4): indicates that the DHCP server allocates IP addresses from a global address pool. If IP addresses cannot be allocated from the global address pool, the DHCP relay agent relays requests of DHCP clients to the DHCP server.
interfaceAndRelay(5): indicates that the DHCP server allocates IP addresses from an interface address pool. If this fails, the request is relayed to the DHCP server and the DHCP server will allocate addresses.

Only global(0), interface(1) and relay(2) are supported.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The allocation mode of IP addresses can be selected. The interface mode is available only when the IP address is assigned for the interface.

Deletion Restriction

The entries in this table can be deleted only when hwDHCPRSelectAllocateMode is set to none(3).

Access Restriction

None.

Description of Alarm Objects

hwPDRouteExceed

OID	Object Name	Bound Variable	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.3.1	hwPDRouteExceed	hwPDRouteExceedType	This object indicates that the number of prefix routing entries exceeds the upper limit.	This object is implemented as defined in the corresponding MIB files.

hwPDRouteExceedResume

OID	Object Name	Bound Variable	Description	Implemented Specifications
1.3.6.1.4.1.2011.5.7.1.3.2	hwPDRouteExceedResume	hwPDRouteExceedType	The number of route prefixes decreases from the maximum value to less than 50% of the maximum value.	This object is implemented as defined in the corresponding MIB files.

Translation

简体中文

Download

Updated: 2022-05-25

Document ID: EDOC1100126932

Downloads: 114

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

Functions Overview

Relationships Between Tables

Description of Single Objects

hwDHCPRelayCycleStatus

hwDHCPRRxBadPktNum

hwDHCPRRxServerPktNum

hwDHCPRTxServerPktNum

hwDHCPRRxClientPktNum

hwDHCPRTxClientPktNum

hwDHCPRTxClientUniPktNum

hwDHCPRTxClientBroPktNum

hwDHCPRelayDiscoverPktNum

hwDHCPRelayRequestPktNum

hwDHCPRelayDeclinePktNum

hwDHCPRelayReleasePktNum

hwDHCPRelayInformPktNum

hwDHCPRelayOfferPktNum

hwDHCPRelayAckPktNum

hwDHCPRelayNakPktNum

hwDHCPRelayStatisticsReset

Description of MIB Tables

hwDHCPRIPTable

Creation Restriction

Modification Restriction

Deletion Restriction

Access Restriction

hwDHCPRSeletAllocateModeTable

Creation Restriction

Modification Restriction

Deletion Restriction

Access Restriction

Description of Alarm Objects

hwPDRouteExceed

hwPDRouteExceedResume

Related Version

Related Documents

Digital Signature File