HUAWEI-PIM-STD-MIB

1.3.6.1.4.1.2011.5.25.149.4.1.14

hwPimKeepalivePeriod

INTEGER (0..4294967295)

Read-write

This object indicates the lifetime of an (S, G) entry.

The value ranges from 60 to 65535.

The default value is 210.

Currently, the value range of 60 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.15

hwPimRegisterSuppressionTime

INTEGER (0..4294967295)

Read-write

This object indicates the interval from the time when the DR receives a Register-Stop message to the time when the DR stops sending the multicast-data-encapsulated Register message.

The value ranges from 11 to 3600.

The default value is 60.

Currently, the value range of 11 to 3600 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.16

hwPimStarGEntries

INTEGER (0..4294967295)

Read-only

This object indicates the total number of (*, G) entries.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.17

hwPimStarGIEntries

INTEGER (0..4294967295)

Read-only

This object indicates the number of entries in hwPimStarGITable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.18

hwPimSGEntries

INTEGER (0..4294967295)

Read-only

This object indicates the total number of (S, G) entries, including PIM-SM entries and PIM-SSM entries.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.19

hwPimSGIEntries

INTEGER (0..4294967295)

Read-only

This object indicates the total number of entries in hwPimSGITable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.20

hwPimSGRptEntries

INTEGER (0..4294967295)

Read-only

This object indicates the total number of (S, G, RPT) entries. The value should be consistent with the total number of PIM-SM (S, G) entries.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.21

hwPimSGRptIEntries

INTEGER (0..4294967295)

Read-only

This object indicates the total number of entries in hwPimSGRptITable.

hwPimSGRptILocalMembership is not included.

1.3.6.1.4.1.2011.5.25.149.4.1.22

hwPimOutAsserts

INTEGER (0..18446744073709551615)

Read-only

This object indicates the total number of sent Assert messages.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.23

hwPimInAsserts

INTEGER (0..18446744073709551615)

Read-only

This object indicates the total number of received Assert messages.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.24

hwPimLastAssertInterface

Integer32 (0..2147483647)

Read-only

This object indicates the index of the interface that receives or sends the last Assert message.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.25

hwPimLastAssertGroupAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the type of the multicast group address carried in the last sent or received Assert message.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.26

hwPimLastAssertGroupAddress

InetAddres

Read-only

This object indicates the multicast group address carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.27

hwPimLastAssertSourceAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type of the source carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.28

hwPimLastAssertSourceAddress

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the source address carried in the Assert message last received or sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.29

hwPimNeighborLossNotificationPeriod

INTEGER (0..4294967295)

Read-write

This object indicates the interval between when a neighbor is lost and when a Notification message is sent for reporting the neighbor-loss event.

The value ranges from 0 to 65535.

By default, the value is 0. That is, the neighbor-loss event is immediately reported.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.30

hwPimNeighborLossCount

INTEGER (0..4294967295)

Read-only

This object indicates the number of neighbor-loss events. Only the interface with the lowest IP address across the network needs to collect statistics on neighbor-loss events.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.31

hwPimInvalidRegisterNotificationPeriod

INTEGER (0..4294967295)

Read-write

This object indicates the period between when an invalid Register message is received and when a Notification message is sent for reporting the event of receiving an invalid Register message.

The value ranges from 10 to 65535.

By default, the value is 65535. That is, the event of receiving an invalid Register message is not reported.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.32

hwPimInvalidRegisterMsgsRcvd

INTEGER (0..4294967295)

Read-only

This object indicates the total number of received invalid Register messages.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.33

hwPimInvalidRegisterAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the multicast group address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.34

hwPimInvalidRegisterOrigin

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the source address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.35

hwPimInvalidRegisterGroup

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the multicast group address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.36

hwPimInvalidRegisterRp

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the RP address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.37

hwPimInvalidJoinPruneNotificationPeriod

INTEGER (0..4294967295)

Read-write

This object indicates the period between when an invalid Join or Prune message is received and when a Notification message is sent for reporting the event of receiving an invalid Join or Prune message.

The value ranges from 10 to 65535.

By default, the value is 65535. That is, the event of receiving an invalid Join or Prune message is not reported.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.38

hwPimInvalidJoinPruneMsgsRcvd

INTEGER (0..4294967295)

Read-only

This object indicates the total number of received invalid Join or Prune messages.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.39

hwPimInvalidJoinPruneAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.40

hwPimInvalidJoinPruneOrigin

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the source address carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.41

hwPimInvalidJoinPruneGroup

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the multicast group address carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.42

hwPimInvalidJoinPruneRp

OCTET STRING (SIZE (0..255))

Read-only

This object indicates the RP address carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.43

hwPimRpMappingNotificationPeriod

INTEGER (0..4294967295)

Read-write

This object indicates the period between when the RP changes and when a Notification message is sent for reporting the RP-change event.

The value ranges from 0 to 65535.

The default value is 65535, indicating that no notification is to be sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.44

hwPimRpMappingChangeCount

INTEGER (0..4294967295)

Read-only

This object indicates the number of RP-change events.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.45

hwPimInterfaceElectionNotificationPeriod

INTEGER (0..4294967295)

Read-write

This object indicates the period between when a DR is selected and when a Notification message is sent for reporting the DR election event.

The value ranges from 0 to 65535.

The default value is 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.46

hwPimInterfaceElectionWinCount

INTEGER (0..4294967295)

Read-only

This object indicates the number of times this device has been elected as a DR. This counter is not incremented for elections on an interface until the first periodic Hello message has been sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.47

hwPimRefreshInterval

INTEGER (0..4294967295)

Read-write

This object indicates the interval for sending State-Refresh messages.

The value ranges from 1 to 255.

The default value is 60.

Currently, the value range of 1 to 255 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.48

hwPimDeviceConfigStorageType

INTEGER {other(1),volatile(2),nonVolatile(3),permanent(4),readOnly(5)}

Read-write

This object indicates the storage type of objects.

This scalar is not implemented. When you perform a Get operation on this scalar, the default value nonVolatile is returned.

Currently, the Set operation is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.49

hwPimNeighborAddCount

INTEGER (0..4294967295)

Read-only

This object indicates the number of times the PIM neighbor goes in the Up state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.50

hwPimNeighborAddNotificationPeriod

INTEGER (0..4294967295)

Read-write

This object indicates the minimum interval for outputting an alarm on the increase in the number of exported PIM neighbors.

The value is in seconds.

The value ranges from 0 to 65535.

The default value is 65535, indicating that no notification is to be sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.54

hwPimMrtLimitAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Accessible-for-notify

This object indicates the type of the multicast group address of the PIM entries whose upper limit is defined through the license file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.55

hwPimMrtLimitSource

InetAddress (SIZE (0|4|8|16|20))

Accessible-for-notify

This object indicates the source address of the entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.56

hwPimMrtLimitGroup

InetAddress (SIZE (0|4|8|16|20))

Accessible-for-notify

This object indicates the group address of the entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.57

hwPimInstanceID

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the Instance ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.60

hwPimInstanceName

OCTET STRING (SIZE (1..64))

Accessible-for-notify

This object indicates the name of the instance to which the trap message belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.61

hwPimNeighborNotificationReason

INTEGER

{

holdTimeExpired(1),

notReceiveHelloForALongTime(2),

interfaceIsDown(3),

receiveHelloAgain(4),

neighbourIsDeleted(5),

alarmTimeOut(6),

receiveHelloHoldTimeZero(7),

bfdSessionDown(8),

userOperation(9),

alarmClear(100)

}

Accessible-for-notify

This object indicates possible causes of PIM neighbor loss.

1.3.6.1.4.1.2011.5.25.149.4.1.62

hwPimNotificationAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

accessible-for-notify

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.63

hwPimStarGCurrentCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the number of global PIM (*, G) entries created.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.64

hwPimStarGTotalCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the maximum number of global PIM (*, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.65

hwPimStarGThreshold

Unsigned32 (1..100)

accessible-for-notify

This object indicates the upper and lower alarm thresholds for global PIM (*, G) entries.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.66

hwPimSGCurrentCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the number of global PIM (S, G) entries created.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.67

hwPimSGTotalCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the maximum number of global PIM (S, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.68

hwPimSGThreshold

Unsigned32 (1..100)

accessible-for-notify

This object indicates the upper and lower alarm thresholds for global PIM (S, G) entries.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.69

hwPimNotificationSrcAddr

InetAddress (SIZE (0|4|8|16|20))

accessible-for-notify

This object indicates the source address in a multicast entry.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.70

hwPimNotificationGrpAddr

InetAddress (SIZE (0|4|8|16|20))

accessible-for-notify

This object indicates the group address in a multicast entry.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.1

hwPimInterfaceIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.2

hwPimInterfaceIpVersion

INTEGER {unknown(0),ipv4(1),ipv6(2)}

Not-accessible

This object indicates the address version of a PIM interface.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.3

hwPimInterfaceAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.4

hwPimInterfaceAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the IP address of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.5

hwPimInterfaceGenerationIdValue

INTEGER (0..4294967295)

Read-only

This object indicates the GenerationID of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.6

hwPimInterfaceDr

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of a DR interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.7

hwPimInterfaceDrPriority

INTEGER (0..4294967295)

Read-create

This object indicates the DR priority of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.8

hwPimInterfaceDrPriorityEnabled

INTEGER{true(1),false(2)}

Read-only

This object indicates whether this network segment uses the DR Priority option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.9

hwPimInterfaceHelloInterval

INTEGER (0..4294967295)

Read-create

This object indicates the interval for an interface to send PIM Hello packets.

The value ranges from 0 to 18000.

The default value is 30.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.10

hwPimInterfaceTrigHelloInterval

INTEGER (0..4294967295)

Read-create

This object indicates the maximum time before this switch sends a triggered PIM Hello message on this interface.

The value range defined in the MIB protocol is 0 to 60.

The default value is 5.

Currently, the value range of 1 to 5 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.11

hwPimInterfaceHelloHoldtime

INTEGER (0..4294967295)

Read-create

This object indicates the holdtime of a PIM neighbor.

The value range defined in the MIB protocol is 0 to 65535 whereas the command line supports 1 to 65535.

The default value is 105.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.12

hwPimInterfaceJoinPruneInterval

INTEGER (0..4294967295)

Read-create

This object indicates the interval for a PIM interface to send Join or Prune messages.

The value ranges from 0 to 18000.

The default value is 60.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.13

hwPimInterfaceJoinPruneHoldtime

INTEGER (0..4294967295)

Read-create

This object indicates the holdtime field carried in the sent Join or Prune message.

The value range defined in the MIB protocol is 0 to 65535 whereas the command line supports 1 to 65535.

The default value is 210.

Currently, the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.14

hwPimInterfaceDfElectionRobustness

INTEGER (0..4294967295)

Read-create

This object indicates the robustness variable for DF election.

The default value is 3.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.15

hwPimInterfaceLanDelayEnabled

INTEGER{true(1),false(2)}

Read-only

This object indicates whether this network segment uses the LanDelay option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.16

hwPimInterfacePropagationDelay

INTEGER (0..4294967295)

Read-create

This object indicates the expected propagation delay between PIM switchs.

The value ranges from 0 to 32767, in milliseconds.

The default value is 500.

Currently, the value range of 1 to 32767 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.17

hwPimInterfaceOverrideInterval

INTEGER (0..4294967295)

Read-create

This object indicates the interval for overriding a prune.

The value ranges from 0 to 65535.

The default value is 2500.

Currently, the maximum access is read-write, and the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.18

hwPimInterfaceEffectPropagDelay

INTEGER (0..4294967295)

Read-only

This object indicates the negotiated value of the LanDelay on an interface.

The value ranges from 0 to 32767.

Currently, the value range of 1 to 32767 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.19

hwPimInterfaceEffectOverrideIvl

INTEGER (0..4294967295)

Read-only

This object indicates the negotiated override interval on this network segment.

The value ranges from 0 to 65535.

Currently, the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.20

hwPimInterfaceSuppressionEnabled

INTEGER{true(1),false(2)}

Read-only

This object indicates whether Join suppression is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.21

hwPimInterfaceBidirCapable

INTEGER{true(1),false(2)}

Read-only

This object indicates whether bidirectional PIM is enabled.

Currently, the return value 0 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.22

hwPimInterfaceDomainBorder

INTEGER{true(1),false(2)}

Read-create

This object indicates whether this interface is a PIM domain border.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.23

hwPimInterfaceStubInterface

INTEGER{true(1),false(2)}

Read-create

This object indicates whether PIM Silent is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.24

hwPimInterfacePruneLimitInterval

INTEGER (0..4294967295)

Read-create

This object indicates the value of PruneLimitTimer on an interface. It is applicable only to PIM-DM.

The value ranges from 0 to 65535.

The default value is 60.

Currently, the maximum access is read-only; the return value 210 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.25

hwPimInterfaceGraftRetryInterval

Unsigned32

Read-create

This object indicates the interval for retransmitting Graft messages.

The value ranges from 0 to 65535

The default value is 3.

Currently, the maximum access is read-write.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.26

hwPimInterfaceSrPriorityEnabled

INTEGER{true(1),false(2)}

Read-only

This object indicates whether state refresh is enabled on an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.27

hwPimInterfaceStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

• Active
• Create and Go
• Destroy

Currently, CreateAndGo and Destroy are supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.28

hwPimInterfaceStorageType

INTEGER {other(1),volatile(2),nonVolatile(3),permanent(4),readOnly(5)}

Read-create

This object indicates the storage type of objects.

Currently, only the value nonVolatile is returned.

Currently, Permanent is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.29

hwPimInterfaceName

DisplayString (SIZE (1..64))

Accessible-for-notify

This object indicates the name of the interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.1

hwPimNeighborIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.2

hwPimNeighborAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Not-accessible

This object indicates the address type of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.3

hwPimNeighborAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates the address of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.4

hwPimNeighborGenerationIdPresent

INTEGER{true(1),false(2)}

Read-only

This object indicates whether a neighbor uses the GenerationID option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.5

hwPimNeighborGenerationIdValue

INTEGER (0..4294967295)

Read-only

This object indicates the GenerationID of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.6

hwPimNeighborUpTime

INTEGER (0..4294967295)

Read-only

This object indicates the time when the neighbor relationship is set up.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.7

hwPimNeighborExpiryTime

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining before the neighbor relationship expires.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.8

hwPimNeighborDrPriorityPresent

INTEGER{true(1),false(2)}

Read-only

This object indicates whether a neighbor uses the DR Priority option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.9

hwPimNeighborDrPriority

INTEGER (0..4294967295)

Read-only

This object indicates the DR priority of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.10

hwPimNeighborLanPruneDelayPresent

INTEGER{true(1),false(2)}

Read-only

This object indicates whether a neighbor uses the LanPruneDelay option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.11

hwPimNeighborTBit

INTEGER{true(1),false(2)}

Read-only

This object indicates whether the T bit is set in the LanPruneDelay option received from a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.12

hwPimNeighborPropagationDelay

INTEGER (0..4294967295)

Read-only

This object indicates the Propagation_Delay field of the LanPruneDelay option received from a neighbor.

The value ranges from 0 to 32767.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.13

hwPimNeighborOverrideInterval

Unsigned32

Read-only

This object indicates the Override_Interval field of the LanPruneDelay option received from a neighbor.

The value ranges from 0 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.14

hwPimNeighborBidirCapable

INTEGER{true(1),false(2)}

read-only

This object indicates whether bidirectional PIM is enabled.

Currently, only the value False is returned.

Currently, only the value False is returned.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.15

hwPimNeighborSrCapable

INTEGER{true(1),false(2)}

Read-only

This object indicates whether a neighbor supports state refresh.

State Refresh function is valid only to PIM DM.

Currently, the return value false is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.16

hwPimNeighborIfName

DisplayString (SIZE (1..64))

Accessible-for-notify

This object indicates the name of the neighbor interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.1

hwPimNbrSecAddressIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.2

hwPimNbrSecAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Not-accessible

This object indicates the type of the secondary IP address of a neighbor.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.3

hwPimNbrSecAddressPrimary

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates the primary IP address of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.4

hwPimNbrSecAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the secondary IP address of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.1

hwPimStarGAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Not-accessible

This object indicates the address type of a multicast group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.2

hwPimStarGGrpAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a multicast group address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.3

hwPimStarGUpTime

INTEGER (0..4294967295)

Read-only

This object indicates the time when an entry is created.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.4

hwPimStarGPimMode

INTEGER {none(1),ssm(2),asm(3),bidir(4),dm(5),other(6)}

Read-only

Currently, only ASM(3) is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.5

hwPimStarGRpAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type of an RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.6

hwPimStarGRpAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.7

hwPimStarGPimModeOrigin

INTEGER {fixed(1),configRp(2),configSsm(3),bsr(4),autoRp(5),embedded(6),other(7)}

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.8

hwPimStarGRpIsLocal

INTEGER{true(1),false(2)}

Read-only

This object indicates whether the local switch is an RP for the group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.9

hwPimStarGUpstreamJoinState

INTEGER{

notJoined

(1),joined

(2)}

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.10

hwPimStarGUpstreamJoinTimer

INTEGER (0..4294967295)

Read-only

This object indicates the interval for sending Join messages for (*, G).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.11

hwPimStarGUpstreamNeighborType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type of an upstream neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.12

hwPimStarGUpstreamNeighbor

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the primary address of an upstream neighbor to which the local switch sends periodic (*, G) Join messages. In the PIM-SM specification, this address is also called RPF'(*, G).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.13

hwPimStarGRpfIfIndex

Integer32 (0..2147483647)

Read-only

This object indicates the index of an RPF interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.14

hwPimStarGRpfNextHopType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the type of the RPF next hop towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.15

hwPimStarGRpfNextHop

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of the RPF next hop towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.16

hwPimStarGRpfRouteProtocol

INTEGER {other (1),local (2),netmgmt (3),icmp (4),egp (5),ggp (6),hello (7),rip (8),isIs (9),esIs (10),ciscoIgrp (11),bbnSpfIgp (12),ospf (13),bgp (14),idpr (15),ciscoEigrp (16),dvmrp (17)}

Read-only

This object indicates the unicast routing protocol through which the route used to find the RPF interface towards the RP is learnt.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.17

hwPimStarGRpfRouteAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the destination address of the unicast route used to find the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.18

hwPimStarGRpfRoutePrefixLength

Unsigned32 (0..2040)

Read-only

This object indicates the prefix length of the destination address of the unicast route used to find the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.19

hwPimStarGRpfRouteMetricPref

INTEGER (0..4294967295)

Read-only

This object indicates the priority of the unicast route used to find the RPF interface towards the RP.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.20

hwPimStarGRpfRouteMetric

INTEGER (0..4294967295)

Read-only

This object indicates the metric of the unicast route used to find the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.1

hwPimStarGIIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.2

hwPimStarGIUpTime

INTEGER (0..4294967295)

Read-only

This object indicates the time since this entry is created by the local switch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.3

hwPimStarGILocalMembership

INTEGER{true(1),false(2)}

Read-only

This object indicates whether the local switch has (*,G) local membership on this interface. It corresponds to local_receiver_include (*, G, I) in the PIM-SM specification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.4

hwPimStarGIJoinPruneState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.5

hwPimStarGIPrunePendingTimer

INTEGER (0..4294967295)

Read-only

This object indicates the prune pending timer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.6

hwPimStarGIJoinExpiryTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time period during which an interface keeps the Join state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.7

hwPimStarGIAssertState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.8

hwPimStarGIAssertTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining before the local switch next sends a (*, G) Assert message on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.9

hwPimStarGIAssertWinnerAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.10

hwPimStarGIAssertWinnerAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.11

hwPimStarGIAssertWinnerMetricPref

INTEGER (0..4294967295)

Read-only

This object indicates the priority of an assert winner.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.12

hwPimStarGIAssertWinnerMetric

INTEGER (0..4294967295)

Read-only

This object indicates the metric of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.1

hwPimSGAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Not-accessible

This object indicates the types of the source address and the multicast group address.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.2

hwPimSGGrpAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a multicast group address.

The length can be 4, 8, 16, or 20 bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.3

hwPimSGSrcAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a source address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.4

hwPimSGUpTime

INTEGER (0..4294967295)

Read-only

This object indicates the time when an (S, G) entry is generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.5

hwPimSGPimMode

INTEGER {none(1),ssm(2),asm(3),bidir(4),dm(5),other(6)}

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.6

hwPimSGUpstreamJoinState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.7

hwPimSGUpstreamJoinTimer

INTEGER (0..4294967295)

Read-only

This object indicates the interval for sending Join messages for (S, G).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.8

hwPimSGUpstreamNeighbor

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an upstream neighbor. This address is also called RPF'(S, G) in the PIM-SM specification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.9

hwPimSGRpfIfIndex

Integer32 (0..2147483647)

Read-only

This object indicates the index of an RPF interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.10

hwPimSGRpfNextHopType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type of the RPF next hop towards the source.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.11

hwPimSGRpfNextHop

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of the RPF next hop towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.12

hwPimSGRpfRouteProtocol

INTEGER {other (1),local (2),netmgmt (3),icmp (4),egp (5),ggp (6),hello (7),rip (8),isIs (9),esIs (10),ciscoIgrp (11),bbnSpfIgp (12),ospf (13),bgp (14),idpr (15),ciscoEigrp (16),dvmrp (17)}

Read-only

This object indicates the unicast routing protocol through which the route used to find the RPF interface towards the source is learnt.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.13

hwPimSGRpfRouteAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the destination address of the route used to find the RPF interface towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.14

hwPimSGRpfRoutePrefixLength

Unsigned32 (0..2040)

Read-only

This object indicates the prefix length of the destination address of the route used to find the RPF interface towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.15

hwPimSGRpfRouteMetricPref

INTEGER (0..4294967295)

Read-only

This object indicates the priority of the route used to find the RPF interface towards the source.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.16

hwPimSGRpfRouteMetric

INTEGER (0..4294967295)

Read-only

This object indicates the metric of the route used to find the RPF interface towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.17

hwPimSGSptBit

INTEGER{true(1),false(2)}

Read-only

This object indicates whether the (S, G) entry contains an SPT flag.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.18

hwPimSGKeepaliveTimer

INTEGER (0..4294967295)

read-only

This object indicates the timeout period of the (S, G) entry.

The value of this object is always 0.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.19

hwPimSGDrRegisterState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.20

hwPimSGDrRegisterStopTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time to stop registration.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.21

hwPimSGRpRegisterPmbrAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-only

This object indicates the address type of an interface that sends Register messages.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.22

hwPimSGRpRegisterPmbrAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

read-only

This object indicates the address of an interface that sends Register messages.

The value of this object is always 0.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.23

hwPimSGUpstreamPruneState

INTEGER

Read-only

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.24

hwPimSGUpstreamPruneLimitTimer

INTEGER (0..4294967295)

Read-only

The value of this object identifies the PruneLimitTimer of the upstream interface of a (S, G) entry.

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.25

hwPimSGOriginatorState

INTEGER

Read-only

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.26

hwPimSGSourceActiveTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining before the local switch reverts to the notOriginator state.

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.27

hwPimSGStateRefreshTimer

INTEGER (0..4294967295)

Read-only

This object indicates the value of the State-Refresh timer of a (S, G) entry.

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.1

hwPimSGIIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.2

hwPimSGIUpTime

INTEGER (0..4294967295)

Read-only

This object indicates the time since this entry is created by the local switch.

Currently, the return value 0 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.3

hwPimSGILocalMembership

INTEGER{true(1),false(2)}

Read-only

local_receiver_include, This object indicates whether the current interface is in the downstream interface list of the (S, G) entry. It corresponds to local_receiver_include (S, G, I) in the PIM-SM specification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.4

hwPimSGIJoinPruneState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.5

hwPimSGIPrunePendingTimer

INTEGER (0..4294967295)

Read-only

This object indicates the PrunePrending timer on an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.6

hwPimSGIJoinExpiryTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining for an interface to be added to the downstream interface list of an (S, G) entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.7

hwPimSGIAssertState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.8

hwPimSGIAssertTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining before the local switch next sends an (S, G) Assert message on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.9

hwPimSGIAssertWinnerAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Read-only

This object indicates the address type of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.10

hwPimSGIAssertWinnerAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.11

hwPimSGIAssertWinnerMetricPref

INTEGER (0..4294967295)

Read-only

This object indicates the priority of an assert winner.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.12

hwPimSGIAssertWinnerMetric

INTEGER (0..4294967295)

Read-only

This object indicates the metric of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.1

hwPimSGRptSrcAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a source address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.2

hwPimSGRptUpTime

INTEGER (0..4294967295)

Read-only

This object indicates the time when an (S, G) entry is generated.

The real value is 0.

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.3

hwPimSGRptUpstreamPruneState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.4

hwPimSGRptUpstreamOverrideTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining before the local switch sends a triggered (S, G, RPT) Join message upstream.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.1

hwPimSGRptIIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.2

hwPimSGRptIUpTime

INTEGER (0..4294967295)

Read-only

This object indicates the time when an interface is added to the downstream interface list of an (S, G) entry.

Currently, the return value 0 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.3

hwPimSGRptILocalMembership

INTEGER{true(1),false(2)}

Read-only

This object indicates whether the local device has both (*, G) include local membership and (S, G) exclude local membership on this interface.

Currently, the return value false is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.4

hwPimSGRptIJoinPruneState

INTEGER

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.5

hwPimSGRptIPrunePendingTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining before the local switch starts to send Prune messages to the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.6

hwPimSGRptIPruneExpiryTimer

INTEGER (0..4294967295)

Read-only

This object indicates the time remaining before (S, G, RPT) Prune state of this interface expires.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.1

hwPimGroupMappingOrigin

INTEGER {fixed(1),configRp(2),configSsm(3),bsr(4),autoRp(5),embedded(6),other(7)}

Not-accessible

This object indicates the multicast group mapping type.

Currently, BSR and auto-RP are supported.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.2

hwPimGroupMappingAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Not-accessible

This object indicates the address type of a multicast group.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.3

hwPimGroupMappingGrpAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a multicast group address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.4

hwPimGroupMappingGrpPrefixLength

Unsigned32 (0..2040)

Not-accessible

This object indicates the mask length of a multicast group address.

The value ranges from 4 to 128.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.5

hwPimGroupMappingRpAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

Not-accessible

This object indicates the address type of an RP.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.6

hwPimGroupMappingRpAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates the address of an RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.7

hwPimGroupMappingPimMode

INTEGER {none(1),ssm(2),asm(3),bidir(4),dm(5),other(6)}

Read-only

This object indicates the PIM mode.

Currently, SM is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.8

hwPimGroupMappingPrecedence

INTEGER (0..4294967295)

Read-only

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.1

hwPimGlobalCtlMsgCountIpVersion

INTEGER {unknown(0),ipv4(1),ipv6(2)}

Not-accessible

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.2

hwPimGlobalCtlMsgCountMsgState

INTEGER {recv(1),sent(2),invalid(3),filter(4)}

Not-accessible

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.3

hwPimGlobalCtlMsgCountRegister

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM Register messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.4

hwPimGlobalCtlMsgCountRegisterStop

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM Register-Stop messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.5

hwPimGlobalCtlMsgCountProbe

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM Probe messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.6

hwPimGlobalCtlMsgCountCrp

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM CRP messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.1

hwPimInterfaceCtlMsgCountIfIndex

INTEGER

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.2

hwPimInterfaceCtlMsgCountIpVersion

INTEGER {unknown(0),ipv4(1),ipv6(2)}

Not-accessible

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.3

hwPimInterfaceCtlMsgCountMsgState

INTEGER {recv(1),sent(2),invalid(3),filter(4)}

Not-accessible

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.4

hwPimInterfaceCtlMsgCountAssert

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM Assert messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.5

hwPimInterfaceCtlMsgCountHello

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM Hello messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.6

hwPimInterfaceCtlMsgCountJoinPrune

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM Join or Prune messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.7

hwPimInterfaceCtlMsgCountBsr

INTEGER (0..4294967295)

Read-only

This object indicates the count of PIM BSR messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.1

hwPimNeighborLoss

hwPimNeighborUpTime

hwPimNeighborIfName

hwPimInstanceID

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.2

hwPimInvalidRegister

hwPimGroupMappingPimMode

hwPimInvalidRegisterAddressType

hwPimInvalidRegisterOrigin

hwPimInvalidRegisterGroup

hwPimInvalidRegisterRp

hwPimInstanceID

hwPimInstanceName

Currently, the sending of the trap message for the Invalid Register message carrying a group address in the SSM range is not supported.

1.3.6.1.4.1.2011.5.25.149.4.0.3

hwPimInvalidJoinPrune

hwPimGroupMappingPimMode

hwPimInvalidJoinPruneAddressType

hwPimInvalidJoinPruneOrigin

hwPimInvalidJoinPruneGroup

hwPimInvalidJoinPruneRp

hwPimNeighborUpTime

hwPimNeighborIfName

hwPimInstanceID

hwPimInstanceName

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.4

hwPimRpMappingChange

hwPimGroupMappingPimMode

hwPimGroupMappingPrecedence

hwPimInstanceID

hwPimInstanceName

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.5

hwPimInterfaceElection

hwPimInterfaceAddressType

hwPimInterfaceAddress

hwPimInterfaceName

hwPimInstanceID

hwPimInstanceName

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.6

hwPimNeighborAdd

hwPimNeighborExpiryTime

hwPimInstanceID

This object indicates that an alarm message is sent wen the number of PIM neighbors increases.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.7

hwPimGRStart

hwPimGRStartTime

hwPimGRInterval

hwPimInstanceID

This object indicates that PIM enters the GR state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.8

hwPimGREnd

hwPimGREndTime

hwPimInstanceID

This object indicates that PIM leaves the GR state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.9

hwPimMrtLimit

hwPimMrtLimitAddressType

hwPimMrtLimitSource

hwPimMrtLimitGroup

hwPimInstanceID

This alarm is generated when the number of PIM entries exceeds the upper limit defined in the License file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.0.12

hwPimMrtLimitClear

• hwPimMrtLimitAddressType
• hwPimMrtLimitSource
• hwPimMrtLimitGroup
• hwPimInstanceID
• hwPimInstanceName

The number of PIM entries falls below the upper limit defined in a PAF file.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.13

hwPimStarGThresholdExceed

• hwPimNotificationAddressType
• hwPimStarGCurrentCount
• hwPimStarGThreshold
• hwPimStarGTotalCount

This object indicates that the proportion of global PIM (*, G) entries created to the maximum global PIM (*, G) entries allowed reaches the upper alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.14

hwPimStarGThresholdExceedClear

• hwPimNotificationAddressType
• hwPimStarGCurrentCount
• hwPimStarGThreshold
• hwPimStarGTotalCount

This object indicates that the proportion of global PIM (*, G) entries created to the maximum global PIM (*, G) entries allowed falls below the lower alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.15

hwPimStarGExceed

• hwPimNotificationAddressType
• hwPimNotificationSrcAddr
• hwPimNotificationGrpAddr
• hwPimStarGTotalCount
• hwPimInstanceName

This object indicates that the number of global PIM (*, G) entries created reaches the maximum number of global PIM (*, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.16

hwPimStarGExceedClear

hwPimNotificationAddressType

This object indicates that the number of global PIM (*, G) entries created falls below the maximum number of global PIM (*, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.17

hwPimSGThresholdExceed

• hwPimNotificationAddressType
• hwPimSGCurrentCount
• hwPimSGThreshold
• hwPimSGTotalCount

This object indicates that the proportion of global PIM (S, G) entries created to the maximum global PIM (S, G) entries allowed reaches the upper alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.18

hwPimSGThresholdExceedClear

• hwPimNotificationAddressType
• hwPimSGCurrentCount
• hwPimSGThreshold
• hwPimSGTotalCount

This object indicates that the proportion of global PIM (S, G) entries created to the maximum global PIM (S, G) entries allowed falls below the lower alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.19

hwPimSGExceed

• hwPimNotificationAddressType
• hwPimNotificationSrcAddr
• hwPimNotificationGrpAddr
• hwPimSGTotalCount
• hwPimInstanceName

This object indicates that the number of global PIM (S, G) entries created exceeds the maximum number of global PIM (S, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.0.20

hwPimSGExceedClear

This object indicates that the number of global PIM (S, G) entries created falls below the maximum number of global PIM (S, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.