HUAWEI-L2IF-MIB
Functions Overview
Huawei defines the HUAWEI-L2IF-MIB. This MIB describes the basic information about the layer 2 port and the VLAN information about hybrid and trunk ports on the layer 2 ports. This MIB can be used to query and set the information on the layer 2 ports, such as the port type, MAC address learning status and mode, suppression percentage of port broadcast, multicast, and unicast, VLAN list of the hybrid and trunk ports.
The OID of root objects is:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwL2Mgmt(42).hwL2IfMib(1)
Relationship Between the Tables
Figure 69-1 shows the relationship between the hwL2IfTable, hwL2IfHybridPortTable, and hwL2IfTrunkPortTable.
The index values in the hwL2IfHybridPortTable and hwL2IfTrunkPortTable correspond to the index value in the hwL2IfTable.
hwL2IfPortIfIndex in hwL2IfTable corresponds to the index of a physical interface, that is, hwL2IfPortIfIndex corresponds to the ifIndex field in IfTable.
Description of Single Objects
hwL2IfPortMax
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.42.1.1.1.1 |
hwL2IfPortMax |
Integer32 |
Read-only |
This object identifies the maximum number of ports on the device. |
At present, the device supports up to ports. The maximum number of ports on the device. |
Description of MIB Tables
hwL2IfTable
hwL2IfTable is used to query and configure the basic attributes of a Layer 2 port, including number, index, type, default VLANID, and the MAC address learning status.
The index of this table is hwL2IfPortNum.
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1 |
hwL2IfPortNum |
Integer32 (1..65535) |
Not-accessible |
Number of the Layer 2 interface port, a unique value, for each port. It is recommended that values be assigned continuously starting from 1. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.2 |
hwL2IfPortIfIndex |
INTEGER |
Read-only |
A unique value, greater than zero, for each interface or interface sub-layer in the managed system. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.3 |
hwL2IfPortType |
INTEGER { trunk(1), invalid(0), access(2), hybrid(3), fabric(4), qinq(5), desirable(6), auto(7) } |
Read-write |
This object indicates the Layer 2 interface Port type. |
Currently, type fabric(4) is not supported by switch. Type invalid(0) is a status only; thus, this type cannot be set. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.4 |
hwL2IfPVID |
Integer32 |
Read-write |
This object indicates the ID of the VLAN where the Layer 2 port is. |
The value ranges from 0 to 4094. If the value is 0, the hwL2IfPVID object is restored to the default value. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.5 |
hwL2IfIsSrcMacFilter |
INTEGER{true(1),false(2)} |
Read-only |
This object indicates whether the function of filtering the source MAC address is supported. At present, the function is not supported. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6 |
hwL2IfMacAddrLearnMode |
INTEGER { iVL(1), sVL(2) } |
Read-only |
This object indicates the MAC address learning mode of the port:
|
Currently, only iVL(1) is supported. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.18 |
hwL2IfPortPriority |
Integer (0..7) |
Read-write |
This object indicates that the Layer 2 port priority. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.19 |
hwL2IfPortName |
OCTET STRING(SIZE(0..48)) |
Read-only |
This object indicates that the Layer 2 port name. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31 |
hwL2IfIsolateGroupEnable |
INTEGER{enabled(1),disabled(2)} |
Read-write |
The default value is disabled(2). |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.32 |
hwL2IfActivePortType |
SYNTAX INTEGER { invalid(0), trunk(1), access(2), hybrid(3), fabric(4), qinq(5) } |
Read-only |
This object indicates the active port link-type. |
This object is implemented as defined in the corresponding MIB files. The fabric(4) is not supported. |
Creation Restriction
This table cannot be created.
Modification Restriction
If you modify a row of the hwL2IfPortType, the contents of the hwL2IFHybridPortTable and hwL2IfTrunkPortTable are affected.
If you successfully set the value of the hwL2IfPVID of a row, the value of the hwL2VlanPortList of the corresponding VLAN in the hwL2VlanMIBTable in the HUAWEI-L2VLAN-MIB is changed. The port list value of the corresponding VLAN is also changed. The hwL2VlanPortList object contains this port.
In the table, the relevant function of the hwL2IfIsSrcMacFilter is not supported now. You can only access its default value: false.
At present, only the iVL mode of learning the MAC address is supported for the hwL2IfMacAddrLearnMode. You can access its value iVL only.
At present, the hwL2IfMacAddressLearn cannot be modified. You can only access its default value: enable.
Deletion Restriction
This table cannot be deleted.
Access Restriction
This table shows the information about all ports on the current device. When a port is added, a row is created in the table. The index value is allocated from 1 in ascending mode. When a port is removed, the index value of the port can be allocated to the next port added.
The instance of the hwL2IfPortIfIndex corresponds to the instance of the ifIndex in the ifTable.
hwL2IfHybridPortTable
This table shows the VLAN information about the hybrid ports. It describes the VLAN list configured for the port in both tagged and untagged modes.
The index of this table is hwL2IfHybridPortIndex.
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.1 |
hwL2IfHybridPortIndex |
Integer(1..65535) |
Not-accessible |
This object identifies the index of the hybrid port. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.2 |
hwL2IfHybridTaggedVlanListLow |
VlanList(SIZE(256)) |
Read-write |
This object identifies the low 2048 VLANs (0-2047) of the tagged VLAN list on the hybrid ports. Value 0 is reserved. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.3 |
hwL2IfHybridTaggedVlanListHigh |
VlanList(SIZE(256)) |
Read-write |
This object identifies the high 2048 VLANs (2048-4095) of the tagged VLAN list on the hybrid ports. Value 4095 is reserved. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.4 |
hwL2IfHybridUnTaggedVlanListLow |
VlanList(SIZE(256)) |
Read-write |
This object identifies the low 2048 VLANs (0-2047) of the untagged VLAN list on the hybrid ports. Value 0 is reserved. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.5 |
hwL2IfHybridUnTaggedVlanListHigh |
VlanList(SIZE(256)) |
Read-write |
This object identifies the high 2048 VLANs (2048-4095) of the untagged VLAN list on the hybrid ports. Value 4095 is reserved. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
This table cannot be created.
Modification Restriction
In this table, the modification of the values of the hwL2IfHybridTaggedVlanListLow and hwL2IfHybridUnTaggedVlanListLow affects each other.
The modification of the values of the hwL2IfHybridTaggedVlanListHigh and hwL2IfHybridUnTaggedVlanListHigh affects each other.
In the two pairs of the preceding objects, the bits that one VLAN ID corresponds to cannot be 1 at the same time.
At present, only the values of the hwL2IfHybridTaggedVlanListLow and hwL2IfHybridTaggedVlanListHigh can be modified. The values of the hwL2IfHybridUnTaggedVlanListLow and hwL2IfHybridUnTaggedVlanListHigh cannot be modified. That is, a hybrid port cannot be added to the VLAN in untagged mode at present.
In a row of this table, the value of an object is a character string with 256 bytes. Eight bits of each byte in the character string correspond to eight VLAN IDs. Therefore, 2048 bits of the low VLAN list and 2048 bits of the high VLAN list correspond to 4096 VLAN IDs. The first bit and the 4096th bit respectively correspond to VLAN 0 and VLAN 4095. Other bits are in one-to-one corresponding to other VLAN IDs. VLAN 0 and VLAN 4095 are reserved, therefore, these two bits are fixedly 0 and cannot be modified.
Deletion Restriction
This table cannot be deleted.
Access Restriction
This table shows the information about all hybrid ports on the current device. The ports are of the hybrid type by default. When a port of another type is successfully set to the hybrid type, a new row is created in the table. The value indicates that the port is added to the VLAN list in tagged mode.
At present, the port cannot be added to the VLAN in untagged mode by switch. Therefore, the values of the hwL2IfHybridUnTaggedVlanListLow and hwL2IfHybridUnTaggedVlanListHigh are a character string of zeros by default.
hwL2IfTrunkPortTable
This table describes the VLAN information through the Layer 2 trunk ports.
The index of this table is hwL2IfTrunkPortIndex.
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.1 |
hwL2IfTrunkPortIndex |
Integer32 (1..65535) |
Not-accessible |
This object identifies the index of the Layer 2 trunk port. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.2 |
hwL2IfTrunkAllowPassVlanListLow |
VlanList(SIZE(0..256)) |
Read-write |
This object identifies the low 2048 VLANs (0-2047) in the VLAN list through the Layer 2 trunk ports. Value 0 is reserved. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.3 |
hwL2IfTrunkAllowPassVlanListHigh |
VlanList(SIZE(0..256)) |
Read-write |
This object identifies the high 2048 VLANs (2048-4095) in the VLAN list through the Layer 2 trunk ports. Value 4095 is reserved. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
This table cannot be created.
Modification Restriction
In a row of this table, the value of an object is a character string with 256 bytes. Eight bits of each byte in the character string correspond to eight VLAN IDs. Therefore, 2048 bits of the low VLAN list and 2048 bits of the high VLAN list correspond to 4096 VLAN IDs.
The first bit and the 4096th bit respectively correspond to VLAN 0 and VLAN 4095. Other bits are in one-to-one corresponding to other VLAN IDs.
VLAN 0 and VLAN 4095 are reserved; therefore, these two bits are fixedly 0 and cannot be modified. If the value of another bit is changed from 0 to 1, it indicates the VLAN of the corresponding VLAN ID is set to one with the information through the trunk port.
Deletion Restriction
This table cannot be deleted.
Access Restriction
This table shows the information about all trunk ports on the current device. The type of Layer 2 ports is Hybrid by default. When a port of another type is successfully set to the trunk type, a new row is created in the table.
hwL2IfDynPortVlanTable
Table for dynamic relationship of port-vlan.
The index of this table is hwL2IfDynPortVlanPortIndex.
OID |
Object Name |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.1 |
hwL2IfDynPortVlanPortIndex |
Integer32 (SIZE (1..65535)) |
not-accessible |
Port index of switch-port. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.2 |
hwL2IfDynPortVlanPvid |
Integer32 (0 | 1..4094) |
read-only |
The Dynamic PVID of port-vlan table. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.3 |
hwL2IfDynPortVlanUntaggedVlanListLow |
VlanList (SIZE (256..256)) |
read-only |
The lowest possible value of the untagged vlan list of dynamic port-vlan table. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.4 |
hwL2IfDynPortVlanUntaggedVlanListHigh |
VlanList (SIZE (256..256)) |
read-only |
The highest possible value of the untagged vlan list of Dynamic port-vlan table. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.5 |
hwL2IfDynPortVlanTaggedVlanListLow |
VlanList (SIZE (256..256)) |
read-only |
The lowest possible value of the tagged vlan list of Dynamic port-vlan table. |
This object is implemented as defined in the corresponding MIB file. |
1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.6 |
hwL2IfDynPortVlanTaggedVlanListHigh |
VlanList (SIZE (256..256)) |
read-only |
The highest possible value of the tagged vlan list of Dynamic port-vlan table. |
This object is implemented as defined in the corresponding MIB file. |
Creation Restriction
No entry can be created in this table.
Modification Restriction
The entries in this table cannot be modified.
Deletion Restriction
The entries in this table cannot be deleted.
Access Restriction
The table has records only when the Layer 2 ports exist.
Unsupported Objects
The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.
Object ID |
Object Name |
Table |
|---|---|---|
1.3.6.1.4.1.2011.5.25.42.1.1.2.1 |
hwL2IfInvalidVlanPacketAlarm |
Alarm Objects |
1.3.6.1.4.1.2011.5.25.42.1.1.2.2 |
hwInBcastRisingThreshold |
Alarm Objects |