HUAWEI-WLAN-AP-UPDATE-MIB

1.3.6.1.4.1.2011.6.139.14.3.1.1

hwWlanApUpdateFTPIPAddress

IpAddress

read-write

This object indicates the IP address of the FTP server used in FTP upgrade mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.2

hwWlanApUpdateFTPUsername

OCTET STRING

read-write

This object indicates the user name of the FTP server used in FTP upgrade mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.3

hwWlanApUpdateFTPPassword

OCTET STRING

read-write

This object indicates the password of the FTP server used in FTP upgrade mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.4

hwWlanApUpdateMode

INTEGER{ftp(1),ac(2),sftp(3)}

read-write

This object indicates the AP upgrade mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.5

hwWlanApUpdateSFTPIPAddress

IpAddress

read-write

This object indicates the IP address of the SFTP server used in SFTP upgrade mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.6

hwWlanApUpdateSFTPUsername

OCTET STRING

read-write

This object indicates the user name of the SFTP server used in SFTP upgrade mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.7

hwWlanApUpdateSFTPPassword

OCTET STRING

read-write

This object indicates the password of the SFTP server used in SFTP upgrade mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.8

hwWlanApUpdateFTPMaxConnectNum

Integer32

read-write

This object indicates the maximum number of FTP IPv4 connections.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.1.9

hwWlanApUpdateSFTPMaxConnectNum

Integer32

read-write

This object indicates the maximum number of SFTP IPv4 connections.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.7.1

hwWlanApUpdateOperAdminOper

INTEGER{start(1),reset(2),cancel(3)}

read-write

When upgrade-related operations are performed, hwWlanApUpdateAdminOper must be configured. You can configure either hwWlanApUpdateApType or hwWlanApUpdateApGroup, or both of them. The Read values of these three objects are meaningless. Therefore, the Get operation is not supported.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.7.2

hwWlanApUpdateOperApType

Integer32

read-write

This object indicates the index of the types of APs to be upgraded in batches.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.7.3

hwWlanApUpdateOperApGroup

OCTET STRING(0–35)

read-write

This object indicates the name of the AP group to which APs to be upgraded in batches belong.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.7.4

hwWlanApUpdateOperPercent

Integer32(0–100)

read-only

This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to APs to be upgraded.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.2.1.1

hwWlanApUpdateFilename

OCTET STRING

read-create

This object indicates the name of the upgrade file matching the type of the AP to be upgraded.

This object must be created together with hwWlanApUpdateRowStatus, but does not need to be modified together with hwWlanApUpdateRowStatus.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.2.1.4

hwWlanApUpdateRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object indicates the row status. When this object is created, hwWlanApType and hwWlanApUpdateFilename must be specified. When this object is deleted, hwWlanApType must be specified.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.2.1.5

hwWlanApUpdatePatchFilename

OCTET STRING

read-create

This object indicates the name of the upgrade patch file matching the type of the APs to be upgraded.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.1

hwWlanApUpdateProgressStatus

INTEGER{noUpdateResult(1), updating(2), updateSuccessful(3), updateFailed(4), insufficientApMemory(5), failToDownloadFile(6), efsAndVersionMismatched(7), invalidFileName(8), efsAndApTypeMismatched(9), fileContentError(10), writingMemoryError(11), updateTimeout(12), apAcLinkDown(13), noNeedToUpdate(14), updateCancel(15), sendFirstFileFailed(16), receiveFileFailed(17), retransferFileFailed(18), updateOverMaxTime(19), noResult(20), waitForNextBatch(21), noNeedUpdateNeedReset(22), neitherNeedUpdateNorReset(23) , fileLoading(24), identifierErr(25), notInConfig(26), getFtpInfoFailed(27), getSftpInfoFailed(28), blockFull(29), readFileFailed(30), normalToStandby(31), modeChanged(32), succeedNeedReset(33), succeedAutoResetting(34), sendUpgradeCfgErr(35), sendUpgradeRequestErr(36), waitFragmentationTimeout(37), upgradeCfgResponseErr(38), processUpgradeFilename(39), cannotGetApType(40), batchUpgradeApTypeMismatched(41), analyzeVersionErr(42), abnormalUpgradeErr(43), isUpdatingNow(44), succeedNeedModeSwitch(45), updateFsmStateCheckFailed(46), fileChanged(47), passwordIsTooLong(48), config changed(49), succeedResetting(50), flashNotSupportupgrade(51), updatefailwhenAPbackup(52), incompatibleHardwareBOMVersion(53), continueSendingImagePieceTimeout(54), backingUpTheSystemSoftware(55), patchChecksumError(56), patchFileError(57), patchActiveFailed(58), vrpPatchProcessActiveFailed(59), vfpPatchActiveFailed(60), kernelPatchActived(61), patchInnerProcError(62), wifiTargetChipPatchActiveFailed(63), notSupportPatchUpdate(64), insufficientStorageSpace(65), insufficientMemorySpaceInAc(66),patchVersionMismatch(67),insufficientMemoryAsNgeEnable(68), noUpdateProgressStatus(255)}

read-only

This object indicates the AP upgrade status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.2

hwWlanApUpdateProgress

Integer32

read-only

This object indicates the AP upgrade progress.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.3

hwWlanApFlashProgress

Integer32

read-only

This object indicates the flash writing progress.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.4

hwWlanApUpdateType

INTEGER{autoUpdate(1), onlineUpdate(2)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.5

hwWlanApUpdateFileType

INTEGER{fit(1),fat(2),fatCloud(3),patch(4)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.6

hwWlanApUpdateFileVersion

OCTET STRING(1..64)

read-only

This object indicates the target version to which an AP is upgraded.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.7

hwWlanApUpdateLastEndTime

OCTET STRING(1..22)

read-only

This object indicates the last time when the AP upgrade is completed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.8

hwWlanApUpdateApGroup

OCTET STRING(1..35)

read-only

This object indicates the group to which an AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.9

hwWlanApUpdateApPartitionId

Integer32

read-only

This object indicates the ID of a channel-based partition.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.3.1.10

hwWlanApUpdateApChannel

Integer32

read-only

This object indicates the channel of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.4.1.1

hwWlanSingleApUpdateAdminOper

INTEGER{start(1),reset(2),cancel(3),patchupgrate(4),patchdelete(5)}

read-write

This object indicates a single AP upgrade.

• start(1): The AP upgrade starts.
• reset(2): After the upgrade is complete, the AP is restarted.
• cancel(3): The upgrade is canceled.
• patchupgrate(4): Upgrade the patch.
• patchdelete(5): Delete the patch.

When an AP upgrade operation is performed, hwWlanSingleApUpdateAdminOper[1] must be used together with hwWlanSingleApUpdateFilename.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.4.1.2

hwWlanSingleApUpdatePercent

Integer32

read-only

This object indicates the single AP upgrade progress.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.4.1.3

hwWlanSingleApUpdateFilename

OCTET STRING

read-create

This object indicates the name of the upgrade file matching the type of the AP to be upgraded.

When an AP upgrade operation is performed, hwWlanSingleApUpdateFilename[3] must be used together with hwWlanSingleApUpdateAdminOper.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.5.1.1

hwWlanApTypeGroupUpdateFilename

OCTET STRING

read-write

This object indicates the name of the upgrade file matching the type of the APs in an AP group to be upgraded.

When configuration is created, hwWlanApTypeGroupUpdateFilename[1] must be used together with hwWlanApTypeGroupUpdateRowStatus; when configuration is modified, hwWlanApTypeGroupUpdateFilename[1] does not need to be used together with hwWlanApTypeGroupUpdateRowStatus.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.5.1.4

hwWlanApTypeGroupUpdateRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object indicates the row status. When this object is configured, hwWlanApType, hwAPGroupName, and hwWlanApTypeGroupUpdateFilename must be specified. When this object is deleted, hwWlanApType and hwAPGroupName must be specified.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.5.1.5

hwWlanApTypeGroupUpdatePatchFilename

OCTET STRING

read-write

This object indicates the name of the patch upgrade file matching the AP type and the AP group to be upgraded.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.6.1.1

hwWlanApUpdateScheduleTaskId

Integer32(0–31)

not-accessible

This object indicates the index of an upgrade task.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.6.1.2

hwWlanApUpdateScheduleTaskStartTime

OCTET STRING(1–16)

read-write

This object indicates the start time of the upgrade task, in format of YYYY/MM/DD,HH:MM. The value ranges from 2000/01/01 to 2050/12/31, 00:00 to 23:59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.6.1.3

hwWlanApUpdateScheduleTaskStopTime

OCTET STRING(1–16)

read-write

This object indicates the end time of the upgrade task, in format of YYYY/MM/DD,HH:MM. The value ranges from 2000/01/01 to 2050/12/31, 00:00 to 23:59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.6.1.4

hwWlanApUpdateScheduleTaskApType

Integer32(0–65535)

read-write

This object indicates the AP type, which must exist. If this object is not set, the value is empty.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.6.1.5

hwWlanApUpdateScheduleTaskApGroup

OCTET STRING(0–35)

read-write

This object indicates the AP group to which the AP belongs. If this object is not set, an empty string is used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.6.1.6

hwWlanApUpdateScheduleTaskState

INTEGER{IDLE(1), RUNNING(2)IDLE(1),WAITING(3),DONE(4),OVERTIME(5),DEAD(6)}

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.6.1.7

hwWlanApUpdateScheduleTaskRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.1.1

hwWlanApUpdateBeginTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates an AP upgrade start alarm.

current

1.3.6.1.4.1.2011.6.139.14.1.2

hwWlanApUpdateResultTrap

• hwWlanApMac: AP MAC address. The value type is MacAddress.
• hwWlanApName: AP name. The value type is OCTET STRING.
• hwWlanApUpdateResult: AP upgrade result, INTEGER{success(1),failureUnknownError(2),failureInsufficientMemory(3),failureDownloadFileFailure(4),failureMismatchVersionEfsAndFileName(5),failureInvalidFileName(6),failureMismatchApTypeInEfs(7),failureFileContentError(8),failureWriteFlashFailure(9),failureTimeoutForUpgrade(10),failureCommunicationFaultApAndAc(11), insufficientStorageSpace(65) }
• hwWlanApUpdateTime: upgrade time. The value type is OCTET STRING.
• hwWlanApUpdateByFileName: upgrade file name. The value type is OCTET STRING.
• hwWlanApUpdateNextOper: action after the upgrade. The value type is INTEGER{notReset(1),reset(2)}.
• hwWlanApUpdateResultStatus: AP upgrade result. The value type is OCTET STRING.
• hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates the upgrade result alarm.

current

1.3.6.1.4.1.2011.6.139.14.1.3

hwWlanApUpdateUbootNotMatchTrap

• hwWlanApMac: AP MAC address, MacAddress
• hwWlanApName: AP name, OCTET STRING
• hwWlanApId: AP ID, Unsigned32

This object indicates that the Uboot version does not match the AP version.

current