HUAWEI-SYS-MAN-MIB

1.3.6.1.4.1.2011.5.25.19.1.1.1

hwSysLocalClock

OCTET STRING (SIZE (8 | 11))

Read-only

This object indicates the local time of the device.

Currently, the value supported is 8 and 11.

1.3.6.1.4.1.2011.5.25.19.1.3.1

hwSysReloadSchedule

Integer32 (0..2147483647)

Read-write

The value of this object identifies the record number used when the device restarts.

The value ranges from 0 to 2147483647.

After the system restarts, the value returns to 0.

65536: Indicates the scheduling mode of the main board.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.2

hwSysReloadAction

INTEGER

Read- write

The value of this object identifies restart types.

When the restart of the system is complete or no restart activities exist, the value of this object is reloadUnavailable(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.4

hwSysReboot

INTEGER { unused(1), rebootWholeRoute(2), rebootSlave(3), slaveSwitch(4) }

Read-write

The value of this object identifies the restart of the master and slave boards.

Values are as follows

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.14.1

hwSysRebootTimes

Integer32 (SIZE (0..2147483647))

Read-only

This object indicates the value of the device reboot times.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.5

hwSysSlaveSwitchEnable

INTEGER{enabled(1),disabled(2)}

Read-write

The value of this object identifies whether the switchover between the main and slave boards is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.6

hwSysLatestRebootErrorInfo

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the cause of the last restart.

Currently, the value range of 0 to 255 is supported.

1.3.6.1.4.1.2011.5.25.19.1.3.8

hwSysDelayReboot

Integer32 (SIZE (0..2147483647))

read-write

This object indicates the delay for the device restart.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.4.1

hwSysImageNum

Integer

Read-only

The value of this object identifies the number of image files.

The object calculates the number of image files given by hwSysImageTable.

The value ranges from 0 to 2147483647.

Currently, the value ranges from 0 to 256.

1.3.6.1.4.1.2011.5.25.19.1.5.1

hwSysCFGFileNum

Integer

Read-only

The value of this object identifies the number of configuration files.

The object calculates the number of configuration files given by hwSysCFGFileTable.

The value ranges from 0 to 2147483647.

Currently, the value ranges from 0 to 256.

1.3.6.1.4.1.2011.5.25.19.1.8.1.1

hwPatchFileNum

Integer32 (0..2147483647)

Read-only

The value of this object identifies the number of patches in the system.

Currently, the value ranges from 0 to 256.

1.3.6.1.4.1.2011.5.25.19.1.8.1.2

hwPatchRecordReset

Integer {unused(1), resetPatchHistory(2),resetPatchError(3)}

Read-write

The value of this object identifies the record of clearing the patch in the system.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.1.5

hwPatchErrorTableMax

Integer32 (1..65535)

Read-write

The value of this object identifies the maximum number of recorded errors supported by hwPatchErrorTable. The value ranges from 1 to 65535.

By default, the value of the maximum number of recorded errors supported by hwPatchErrorTable is 50.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.1.8

hwPatchFailReason

INTEGER{patchOpenErr(1),getPatchErr(2),patchSpaceShortage(3),patchConflict(4),versionErr(5)}

read-only

This object is an index that specifies patch fail reason.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.2.1.1.1

hwSysCurEntPhysicalIndex

Integer32 (0..2147483647)

Not-accessible

The value of this object identifies the system index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.2.1.1.2

hwSysCurCFGFileIndex

Integer32 (0..2147483647)

Read-only

The value of this object identifies the index of the configuration file in the configuration file list.

The value is referenced from hwSysCFGFileTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.2.1.1.3

hwSysCurImageIndex

Integer32 (0..2147483647)

Read-only

The value of this object identifies the index of the image file in the image file list.

The value is referenced from hwSysImageTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.2.1.1.6

hwSysCurPatchFileIndex

Integer32 (0..2147483647)

Read-only

The value of this object identifies the index of the patch file in the patch file list.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.1

hwSysReloadScheduleIndex

Integer32 (1..2147483647)

Not-accessible

The value of this object identifies the index of the instance. The value ranges from 1 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.2

hwSysReloadEntity

Integer32 (1..2147483647)

Read-create

This object indicates the index of the restarting entity.

The value is referred to from entPhysicalTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.3

hwSysReloadCfgFile

Integer32

Read-create

The value of this object identifies the configuration file used after the restart.

The value is limited by hwSysCFGFileTable.

The value ranges from 0 to 2147483647.

The default value is 0, which means the configuration file remains unchanged.

The configuration of the slave main control board is not supported.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.4

hwSysReloadImage

Integer32 (0..2147483647)

Read-create

The value of this object identifies the image file used after the restart.

The value is limited by hwSysImageTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.5

hwSysReloadReason

DisplayString (SIZE (0..255))

Read-create

This object indicates the cause of the restart.

The value is a string of 0 to 255 characters.

After the system restarts, the character string is deleted.

Users can get the string of 0 character but cannot set the string of 0 character.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.6

hwSysReloadScheduleTime

OCTET STRING (SIZE (8 | 11))

Read-create

This object indicates the time of the restart.

The only valid value of this object is an 8-byte string which indicates the local time of the switch.

The maximum scheduled time is 30 days from the current system clock time. If the value set is earlier than the value of hwSysLocalClock or beyond the maximum scheduled time limit, a bad value error occurred.

The value of all-zero octet strings indicates system restart at once if the reload action is reloadOnSchedule(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.7

hwSysReloadRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

If one of values of hwSysReloadEntity, hwSysReloadCfgFile and hwSysReloadImage is invalid, the value of hwSysReloadRowStatus cannot be set to "active".

A valid entry means the specified element is available in the current system. Reload an entity indexed by hwSysReloadEntity with the startup configuration file and the image may be not allowed. Herein the entry is invalid.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.10

hwSysReloadPatchFile

Integer32

Read-create

The value of this object identifies the patch file used after the restart.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.11

hwSysReloadPatchState

INTEGER(1: run(1) 2: unused(255))

Read-create

The value of this object identifies the running status of the patch at the next startup. That is, whether the loaded patch is in the Run state at the next startup.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.12

hwSysReloadOperateDestType

INTEGER {1: all(1), 2: slave(2), 3: chassis(3), 4: unused(4)}

Read-create

This object indicates the object to be restarted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.3.1.13

hwSysReloadOperateDestIndex

OCTET STRING (SIZE (1..64))

Read-create

This object indicates the index of the board needs to be restarted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.5.2.1.1

hwSysCFGFileIndex

Integer

Not-accessible

The value of this object identifies the index of the configuration file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.5.2.1.2

hwSysCFGFileName

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the name of the configuration file.

Currently, Huawei products support two formats of configuration files, namely, .CFG and .ZIP.

A file name containing path and suffix is a string of 5 to 64 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.5.2.1.3

hwSysCFGFileSize

Integer32

Read-only

The value of this object identifies the size of the configuration file.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.5.2.1.4

hwSysCFGFileLocation

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the location of the configuration file, namely, the path.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.5.2.1.5

hwSysCFGFileReason

DisplayString (SIZE (0..255))

Read-only

This object indicates the cause of a configuration file error.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.19.1.4.2.1.1

hwSysImageIndex

Integer

Not-accessible

The value of this object identifies the index of the image file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.4.2.1.2

hwSysImageName

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the name of the image file.

A file name containing path and suffix is a string of 4 to 64 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.4.2.1.3

hwSysImageSize

Integer

Read-only

The value of this object identifies the size of the image file.

The value ranges from 0 to 2147483647, in bytes. The size depends on the actual file and is limited by the physical storage device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.4.2.1.4

hwSysImageLocation

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the location of the image file, namely the path.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.4.2.1.5

hwSysImageVersion

OCTET STRING (SIZE (1..64))

Read-only

The value of this object identifies the version of the image file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.4.2.1.6

hwSysImageReason

DisplayString (SIZE (0..255))

Read-only

This object indicates the cause of an image file error.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.1

hwSysSlaveSwitchIndex

Integer32 (1...80)

Not-accessible

The value of the object identifies the index of the table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.2

hwSysSlaveSwitchChassisNum

OCTET STRING (SIZE (1..64))

Read-write

The value of the object identifies the chassis number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.3

hwSysSlaveSwitchOperType

Integer {unused(1), slaveswitch(2), slaveswitchlock(3)}

Read-write

Operation type. The object has the following values:

• unused(1): means the default value.

• slaveswitch(2): perform force switchover.

• slaveswitchlock(3): enable the force switchover, this value should be used with the object of hwSysSlaveSwitchEnableStatus.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.4

hwSysSlaveSwitchEnableStatus

INTEGER{enabled(1),disabled(2)}

Read-write

The enable status of switchover for AMB (Active Main Board) and SMB (Standby Main Board).

• enable(1): enable the force switchover.

• disable(2): disable the force switchover.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.2.1.1

hwPatchFileIndex

INTEGER (0..4294967295)

Not-accessible

The value of this object identifies the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.2.1.2

hwPatchFileName

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the name of a patch file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.2.1.3

hwPatchFileSize

Integer32

Read-only

This object indicates the size of a patch file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.2.1.4

hwPatchFileLocation

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the position of a patch file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.2.1.5

hwPatchFileVersion

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the version of the patch file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.4.1.1

hwPatchLoadDestType

INTEGER {all(1),slave(2),slot(3),chassis(4),unused(5)}

Read-create

This object indicates the type of the board to be loaded with the patch.

Currently, only values all(1) and unused(5) are supported.

1.3.6.1.4.1.2011.5.25.19.1.8.4.1.2

hwPatchLoadDestIndex

OCTET STRING (SIZE (1..64))

Read-create

This object indicates the index of the files to be loaded with the patch.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.19.1.8.4.1.3

hwPatchLoadState

INTEGER

{

loading(1),

success(2),

failure(3),

none(4)

}

Read-only

Patch loading state:

• loading(1):Patch is loading.
• success(2):Patch loading succeeded.
• failure(3):Patch loading failed.
• none(4):Patch and board do not match.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.4.1.51

hwLoadPatchRowState

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object identifies the status of a row.

This object only supports creation of the row status.

1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.1

hwPatchSlotIndex

Integer32 (0..255)

Not-accessible

The value of this object identifies the index of the slot.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.2

hwPatchIndex

INTEGER (0..4294967295)

Not-accessible

This object indicates the index of the patch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.3

hwPatchUsedFileName

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the name of the patch file.

Currently, the value range of 0 to 255 is supported.

1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.4

hwPatchVersion

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the version of the patch file.

Currently, the value range of 0 to 255 is supported.

1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.6

hwPatchProgramVersion

OCTET STRING (SIZE (1..64))

Read-only

The value of the object identifies the version number of the host software.

Currently, the value range of 0 to 255 is supported.

1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.13

hwPatchAdminStatus

INTEGER

{

run(1),

active(2),

deactive(3),

delete(4)

}

Read-write

The value of this object identifies the operating status of a patch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.14

hwPatchOperateState

INTEGER

{

patchRunning(1),

patchActive(2),

patchDeactive(3),

patchDeleting(4)

}

Read-only

The value of this patch identifies the running status of the patch.

Currently, the value of patchDeleting(4) is not supported.

1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.1

hwPatchNumMax

INTEGER (0..4294967295)

Read-only

The value of this object identifies the maximum number of patches.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.2

hwPatchIdleNum

Integer32

Read-only

The value of this object identifies the number of idle patches.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.10

hwPatchStateRuningPatchNum

Integer32

Read-only

The value of this object identifies the number of patches in the Run state in the patch area.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.11

hwPatchStateActivePatchNum

Integer32

Read-only

The value of this object identifies the number of patches in the Active state in the patch area.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.12

hwPatchStateDeactivePatchNum

Integer32

Read-only

The value of this object identifies the number of patches in the Deactive state in the patch area.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.1

hwPatchHistoryIndex

INTEGER (0..4294967295)

Not-accessible

This object indicates the index of the table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.1

hwPatchErrorIndex

INTEGER (0..4294967295)

Not-accessible

This object indicates the index of the patch error.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.2

hwPatchErrorSlot

INTEGER (0..4294967295)

Read-only

This object indicates the number of the slot related to a patch error.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.3

hwPatchErrorPatchFileName

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the index of the patch file when the patch has an error.

Currently, the value range of 0 to 255 is supported.

1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.4

hwPatchErrorPatchIndex

INTEGER (0..4294967295)

Read-only

This object indicates the index of the patch when the patch has an error.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.5

hwPatchErrorCode

INTEGER{initNoMemory(1),initMemProtectFail(2),fetchInputIsNull(5),fetchFlagNotSame(6),fetchProgVerInvalid(7),fetchProgCrcInvalid(8),fetchPatNoInvalid(9),fetchTotalNumInvalid(10),fetchUnitCrcInvalid(11),fetchFuncNumTooMany(12),fetchTypeInvalid(13),fetchCommonAfterTemp(14),fetchLengthNotSuited(15),fetchCodeAddrNotSuited(16),fetchDataAddrNotSuited(17),fetchBaseAddrNotSuited(18),fetchCodeLenOverflow(19),fetchDataLenOverflow(20),fetchOldAfterIndependent(103),fetchUpdateDependency(104),chgproChangeModeFailed(30),activeNumInvalid(40),activeHasBeenActived(41),activeNotExist(42),activeStateInvalid(43),activeCodeAddrNotSuited(44),activeDataAddrNotSuited(45),activeBaseAddrNotSuited(46),activeFormatUnknown(47),runNumInvalid(55),runHasInRunning(56),runNotActive(57),runIdleState(58),runBadState(59),deactNumInvalid(70),deactRunOrActive(71),deactRunningState(72),deactBadState(73),removeNumInvalid(80),removeHasInIdle(81),removeBadStatus(82),caclcrcFileCrcInvalid(90),caclcrcUnitCrcInvalid(91),caclcrcOutputIsNull(92),caclcrcNumInvalid(93),caclcrcBadUnitCrc(95),showNumInvalid(100),showCodeLenIsZero(101),showDataLenIsZero(102),addlistBadParam(105),addlistMemAllocFail(106),depToListBadParamDep(107),depToListBadParamList(108),depToListMemFreeFail(109),depToListAddItemFail(110),listToDepBadParamDep(111),listToDepBadParamList(112),listToDepBadParamDepCount(113),updateDepBadParam(114),updateDepMemAllocFail(115),updateDepDepToListFail(116),updateDepToInterFail(117),updateDepFromInterFail(118),updateDepListToDepFail(119),depToInterBadParam(120),depToInterInvalidNo(121),depToInterAddFail(122),interToDepBadParam(123),interToDepAppendFail(124),appendListBadParam(125),appendListAddFail(126),indActiveBadParam(127),indActiveAlreadyActive(128),indActiveListFail(129),indActiveListGenFail(130),indActiveListAppendFail(131),indActiveMemFreeFail(132),indActiveDepIdle(133),indActiveDepInvalid(134),indActiveCodeAddrNotSuited(135),indActiveDataAddrNotSuited(136),indActiveBaseAddrNotSuited(137),indActiveNotLoaded(138),indActiveFuncFail(139),indPatchFileNoInd(140),indRunFail(141),indDeactiveFail(142),indRemoveFail(143),indGetDepOfPara(144),indGetDepOnPara(145),indGetDepOnFail(146),fetchBufferPara(147),fetchBufferFail(148),getStatePara(149),indActiveAlreadyRunning(150),indFreeListInputNull(151),indFreeListMemFreeErr(152),indBitTblToArrayInputNull(153),indBitTblToArrayFreeFail(154),indBitTblToArrayAllocFail(155),indBitTblToArrayBitsetMore(156),indBitTblToArrayBitsetLess(157),listToDepBadParamAllocFail(158),listToDepBadParamFreeFail(159),indDeactiveFreeNull(160),indRemoveFreeFail(161),getInfoBufNull(162),getInfoOutputNull(163),getInfoFlagNotSame(164),getInfoProgCrcInvalid(165),getInfoFileCrcInvalid(166),getInfoUnitCrcInvalid(167),indPatchOpNotconfig(169),normalOpNotconfig(170),indDeactiveDeative(173),indDeactiveRunning(174),indDeactiveInvalid(176),indRunDeactive(177),indRunRunning(178),indRunIdle(179),indRunInvalid(180),indActiveIdle(171),indActiveInvalid(172),indFetchActive(183),indFetchRunning(185),indFetchDeactive(184),indFetchInvalid(186),indRemoveIdle(181),indRemoveInvalid(182),patchFileNotExist(187),patchRestoreFailed(188),patchPackageError(189),patchMisoperation(190),patchSystemUnstable(191),unknown(65535)}

Read-only

This object indicates the flag of the patch error.

Currently, the supported value range is:

INTEGER { initNoMemory(1), initMemProtectFail(2), fetchInputIsNull(5), fetchFlagNotSame(6), fetchProgVerInvalid(7), fetchProgCrcInvalid(8), fetchPatNoInvalid(9), fetchTotalNumInvalid(10), fetchUnitCrcInvalid(11), fetchFuncNumTooMany(12), fetchTypeInvalid(13), fetchCommonAfterTemp(14), fetchLengthNotSuited(15), fetchCodeAddrNotSuited(16), fetchDataAddrNotSuited(17), fetchBaseAddrNotSuited(18), fetchCodeLenOverflow(19), fetchDataLenOverflow(20), fetchOldAfterIndependent(103), fetchUpdateDependency(104), chgproChangeModeFailed(30), activeNumInvalid(40), activeHasBeenActived(41), activeNotExist(42), activeStateInvalid(43), activeCodeAddrNotSuited(44), activeDataAddrNotSuited(45), activeBaseAddrNotSuited(46), activeFormatUnknown(47), runNumInvalid(55), runHasInRunning(56), runNotActive(57), runIdleState(58), runBadState(59), deactNumInvalid(70), deactRunOrActive(71), deactRunningState(72), deactBadState(73), removeNumInvalid(80), removeHasInIdle(81), removeBadStatus(82), caclcrcFileCrcInvalid(90), caclcrcUnitCrcInvalid(91), caclcrcOutputIsNull(92), caclcrcNumInvalid(93), caclcrcBadUnitCrc(95), showNumInvalid(100), showCodeLenIsZero(101), showDataLenIsZero(102), addlistBadParam(105), addlistMemAllocFail(106), depToListBadParamDep(107), depToListBadParamList(108), depToListMemFreeFail(109), depToListAddItemFail(110), listToDepBadParamDep(111), listToDepBadParamList(112), listToDepBadParamDepCount(113), updateDepBadParam(114), updateDepMemAllocFail(115), updateDepDepToListFail(116), updateDepToInterFail(117), updateDepFromInterFail(118), updateDepListToDepFail(119), depToInterBadParam(120), depToInterInvalidNo(121), depToInterAddFail(122), interToDepBadParam(123), interToDepAppendFail(124), appendListBadParam(125), appendListAddFail(126), indActiveBadParam(127), indActiveAlreadyActive(128), indActiveListFail(129), indActiveListGenFail(130), indActiveListAppendFail(131), indActiveMemFreeFail(132), indActiveDepIdle(133), indActiveDepInvalid(134), indActiveCodeAddrNotSuited(135), indActiveDataAddrNotSuited(136), indActiveBaseAddrNotSuited(137), indActiveNotLoaded(138), indActiveFuncFail(139), indPatchFileNoInd(140), indRunFail(141), indDeactiveFail(142), indRemoveFail(143), indGetDepOfPara(144), indGetDepOnPara(145), indGetDepOnFail(146), fetchBufferPara(147), fetchBufferFail(148), getStatePara(149), indActiveAlreadyRunning(150), indFreeListInputNull(151), indFreeListMemFreeErr(152), indBitTblToArrayInputNull(153), indBitTblToArrayFreeFail(154), indBitTblToArrayAllocFail(155), indBitTblToArrayBitsetMore(156), indBitTblToArrayBitsetLess(157), listToDepBadParamAllocFail(158), listToDepBadParamFreeFail(159), indDeactiveFreeNull(160), indRemoveFreeFail(161), getInfoBufNull(162), getInfoOutputNull(163), getInfoFlagNotSame(164), getInfoProgCrcInvalid(165), getInfoFileCrcInvalid(166), getInfoUnitCrcInvalid(167), indPatchOpNotconfig(169), normalOpNotconfig(170), indDeactiveDeative(173), indDeactiveRunning(174), indDeactiveInvalid(176), indRunDeactive(177), indRunRunning(178), indRunIdle(179), indRunInvalid(180), indActiveIdle(171), indActiveInvalid(172), indFetchActive(183), indFetchRunning(185), indFetchDeactive(184), indFetchInvalid(186), indRemoveIdle(181), indRemoveInvalid(182), patchFileNotExist(187), patchRestoreFailed(188), patchPackageError(189), unknown(65535) }

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.1

hwBootRomIndex

INTEGER {1: master(1), 2: slave(2)}

Not-accessible

The value of this object identifies the index of the BootROM table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.2

hwBootRomBootDevice

OCTET STRING (SIZE (1..64))

Read-only

This object indicates the name of the BootROM startup device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.3

hwBootRomprocessorNo

Integer32

Read-only

The value of this object identifies the number of the BootROM processor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.4

hwBootRomHostName

OCTET STRING (SIZE (1..64))

Read-only

The object indicates the name of the BootROM host.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.5

hwBootRomFileName

OCTET STRING (SIZE (1..64))

Read-only

The object indicates the name of the BootROM file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.6

hwBootRomIpOnEthernet

OCTET STRING (SIZE (4))

Read-only

The object indicates the IP address of the BootROM Ethernet interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.7

hwBootRomIpOnBackPlane

OCTET STRING (SIZE (4))

Read-only

The object indicates the IP address of the BootROM backplane.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.8

hwBootRomHostIp

OCTET STRING (SIZE (4))

Read-only

The object indicates the IP address of the BootROM host.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.9

hwBootRomGatewayIp

OCTET STRING (SIZE (4))

Read-only

The object indicates the IP address of the BootROM gateway.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.14

hwBootRomXModemBaudRate

Integer32

Read-only

The value of the object identifies the baud rate for transmitting the XModem data.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.11.1.1.15

hwBootRomVersion

Integer32

Read-only

The object indicates the BootROM version.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.13.1.1.1

hwSysFileType

INTEGER {1: image(1), 2: config(2), 3: paf(3) 4: license(4), 5: patch(5)}

Not-accessible

The value of this object is an index that indicates the type of a file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.13.1.1.2

hwSysFileName

OCTET STRING (1..110)

Not-accessible

This object is an index that indicates the name of a file on the main control board.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.13.1.1.3

hwSysFileIndex

Integer32 (0..2147483647)

Read-only

The value of this object identifies the index of a file in the specified table. If the value is 0, it indicates that this file does not exist in the specified table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.14.2.1.1

hwSysRebootRecordIndex

Integer32 (1..2147483647)

not-accessible

The index of hwSysRebootRecordTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.14.2.1.2

hwSysRebootReason

INTEGER

{

manual(1),

powerOff(2),

unknown(3),

schedule(4),

software(5)

}

Read-only

The reason of system's reboot.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.14.2.1.3

hwSysRebootTime

DateAndTime (SIZE (8))

Read-only

The time at which the device restarts or the time the device waits to restart.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.2.1

hwSysClockChangedNotification

hwSysLocalClock

This object indicates the notification sent when the system clock changes.

When the system clock changes, this trap is triggered. For example, the system clock is changed through command lines.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.2.2

hwSysReloadNotification

This object indicates the restart notification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.2.3

hwSysMasterHDError

None

When the hard disk on master board cannot be read and written because of a certain error, the hard disk on master board is unregistered and the notification is sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.2.4

hwSysSlaveHDError

None

When the hard disk on slave board cannot be read and written because of a certain error, the hard disk on slave board is unregistered and the notification is sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.2.5.1

hwPatchErrorTrap

Patch operation error.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.2.8

hwSysSlaveSwitchSuccessNotification

hwSysSlaveSwitchChassisNum

This object indicates that the hwSysSlaveSwitchChassisNum chassis is successfully switched.

Current

1.3.6.1.4.1.2011.5.25.19.2.9

hwSysSlaveSwitchFailNotification

hwSysSlaveSwitchChassisNum

This object indicates that the hwSysSlaveSwitchChassisNum chassis fails to be switched.

Current

1.3.6.1.4.1.2011.5.25.19.2.10

hwSysIssuNotification

• hwIssuState
• hwIssuConditionCheck

This object indicates that ISSU upgrade was complete.

This object is implemented as defined in the corresponding MIB files.