HUAWEI-HWTACACS-MIB

1.3.6.1.4.1.2011.5.25.20.1.1.1.1

hwTACACSServerGroupIndex

Integer32

read-only

This object indicates the index of an HWTACACS server template.

The value is an integer in the range from 1 to 128.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.2

hwTACACSServerGroupName

Octet String

read-create

This object indicates the name of an HWTACACS server template.

The value is a string of 1 to 32 case-sensitive characters, including letters, digits (0-9), periods (.), hyphens (-), underscores (_), and a combination of these characters. The value cannot be - or --.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.3

hwTACACSServerGroupSourceIP

OCTET STRING (SIZE (4))

read-create

This object indicates the source IP address used by the device to communicate with the HWTACACS server.

The value is in dotted decimal notation. By default, the device uses the IP address of the actual outbound interface as the source IP address encapsulated in HWTACACS packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.4

hwTACACSServerGroupKey

Octet String

read-create

This object indicates the shared key of the HWTACACS server.

The value is a string of 0 to 392 characters. By default, no shared key is configured.

The Get operation returns a fixed value of ****** after the shared key of the HWTACACS server is configured.

1.3.6.1.4.1.2011.5.25.20.1.1.1.5

hwTACACSServerGroupTimer

Integer32

read-create

This object indicates the period after which the primary server returns to the active state.

The value is an integer in the range from 0 to 255, in minutes. By default, the period after which the primary server returns to the active state is 5 minutes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.6

hwTACACSServerGroupDomain

INTEGER

read-create

This object indicates the format of the user name in packets sent by the device to the HWTACACS server. The values and meanings are as follows:

• 1: open, indicating that the user name contains a domain name.
• 2: close, indicating that the user name does not contain a domain name.
• 3: original: indicates that the device uses the originally entered user name without changing it (the default configuration).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.7

hwTACACSServerGroupOctFmt

INTEGER{ byte(1), kbyte(2), mbyte(3), gbyte(4) }

read-create

This object indicates the traffic unit used by the HWTACACS server. The values and meanings are as follows:

• 1: byte (default)
• 2: Gbyte
• 3: kbyte
• 4: Mbyte

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.8

hwTACACSServerGroupTimeout

Integer32

read-create

This object indicates the response timeout interval of the HWTACACS server.

The value is an integer in the range from 1 to 300, in seconds. The default value is 5 seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.9

hwTACACSServerGroupPriAuthenAddr

OCTET STRING (SIZE (4))

read-create

This object indicates the IP address of the primary authentication server. The value is in dotted decimal notation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.10

hwTACACSServerGroupPriAuthenPort

Integer32

read-create

This object indicates the port number of the primary authentication server. The value is an integer in the range from 1 to 65535. The default value is 49.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.11

hwTACACSServerGroupPriAuthorAddr

OCTET STRING (SIZE (4))

read-create

This object indicates the IP address of the primary authorization server. The value is in dotted decimal notation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.12

hwTACACSServerGroupPriAuthorPort

Integer32

read-create

This object indicates the port number of the primary authorization server. The value is an integer in the range from 1 to 65535. The default value is 49.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.13

hwTACACSServerGroupPriAccoutAddr

OCTET STRING (SIZE (4))

read-create

This object indicates the IP address of the primary accounting server. The value is in dotted decimal notation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.14

hwTACACSServerGroupPriAccoutPort

Integer32

read-create

This object indicates the port number of the primary accounting server. The value is an integer in the range from 1 to 65535. The default value is 49.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.15

hwTACACSServerGroupSecAuthenAddr

OCTET STRING (SIZE (4))

read-create

This object indicates the IP address of the secondary authentication server. The value is in dotted decimal notation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.16

hwTACACSServerGroupSecAuthenPort

Integer32

read-create

This object indicates the port number of the secondary authentication server. The value is an integer in the range from 1 to 65535. The default value is 49.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.17

hwTACACSServerGroupSecAuthorAddr

OCTET STRING (SIZE (4))

read-create

This object indicates the IP address of the secondary authorization server. The value is in dotted decimal notation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.18

hwTACACSServerGroupSecAuthorPort

Integer32

read-create

This object indicates the port number of the secondary authorization server. The value is an integer in the range from 1 to 65535. The default value is 49.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.19

hwTACACSServerGroupSecAccoutAddr

OCTET STRING (SIZE (4))

read-create

This object indicates the IP address of the secondary accounting server. The value is in dotted decimal notation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.20

hwTACACSServerGroupSecAccoutPort

Integer32

read-create

This object indicates the port number of the secondary accounting server. The value is an integer in the range from 1 to 65535. The default value is 49.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.21

hwTACACSServerGroupCurAuthenAddr

OCTET STRING (SIZE (4))

read-only

This object indicates the IP address of the current authentication server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.22

hwTACACSServerGroupCurAuthorAddr

OCTET STRING (SIZE (4))

read-only

This object indicates the IP address of the current authorization server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.23

hwTACACSServerGroupCurAccoutAddr

OCTET STRING (SIZE (4))

read-only

This object indicates the IP address of the current accounting server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.120

hwTACACSServerGroupRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the TACACS server status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.130

hwTACACSServerSourceVlanifV4

Integer32

read-create

This object indicates that the IPv4 address of a VLANIF interface is used as the source IPv4 address for the device to communicate with the HWTACACS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.1.1.1.131

hwTACACSServerSourceVlanifV6

Integer32

read-create

This object indicates that the IPv6 address of a VLANIF interface is used as the source IPv6 address for the device to communicate with the HWTACACS server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.20.4.1.1

hwTACACSEnable

INTEGER

read-only

By default, the TACACS function is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.20.4.1.2

hwTACACSAcctStopResendDisable

INTEGER

read-create

By default, a device is enabled to retransmit accounting stop packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.20.4.1.3

hwTACACSAcctStopResendNumber

Integer32

read-create

This object indicates the number of retransmitted accounting stop packets. The value is an integer that ranges from 0 to 300. The default value is 100.

This object is implemented as defined in the corresponding MIB file.