HUAWEI-ETHOAM-MIB

1.3.6.1.4.1.2011.5.25.136.1.1.11.1

hwDot1agCfmGmacTraceEnabled

INTEGER{enabled(1),disabled(2)}

read-write

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.1

hwDot3ahEfmEnabled

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates that EFM is enabled globally.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.1

hwTestMessageTableNextIndex

INTEGER (0..4294967295)

Read-only

This object indicates that the next hwTestMessageTable instance is searched.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.3

hwY1731AisMaxPktNum

INTEGER (0..4294967295)

accessible-for-notify

This object indicates the number of AIS packets sent and received within 1s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.1

hwDot1agCfmGmacTraceIndex

INTEGER (0..4294967295)

not-accessible

This object indicates the table index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.2

hwDot1agCfmGmacTraceState

INTEGER{enabled(1),disabled(2)}

read-create

The default value is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.3

hwDot1agCfmGMacTraceMacAddress

OCTET STRING (SIZE (6))

read-create

This object indicates the destination MAC address of LTMs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.4

hwDot1agCfmGmacTraceServiceType

INTEGER

{

vlan(1),

invalid(255)

}

read-create

The default value is 255 (invalid).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.5

hwDot1agCfmGmacTraceVlanValue

Integer32 (0 | 1..4094)

read-create

This object indicates the VLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.6

hwDot1agCfmGmacTraceVsiName

OCTET STRING

read-create

This object indicates the VSI name.

This object is not implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.7

hwDot1agCfmGmacTraceL2vcValue

INTEGER (0..4294967295)

read-create

This object indicates the L2VC ID.

This object is not implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.8

hwDot1agCfmGmacTraceL2vcType

INTEGER

read-create

The value of this object identifies the L2VC type.

• 1: invalid
• 2: l2vcRaw, indicating that no VLAN tag is encapsulated into packets
• 3: l2vcTagged, indicating that a VLAN tag is encapsulated into packets

The default value is 1 (invalid).

This object is not implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.9

hwDot1agCfmGmacTraceDot1qVlan

Integer32 (0 | 1..4094)

read-create

This object indicates the dot1q VLAN ID.

This object is not implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.10

hwDot1agCfmGmacTracePeVlan

Integer32 (0 | 1..4094)

read-create

This object indicates the PE VLAN ID.

This object is not implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.11

hwDot1agCfmGmacTraceCeVlan

Integer32 (0 | 1..4094)

read-create

This object indicates the CE VLAN ID.

This object is not implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.12

hwDot1agCfmGmacTraceOutIfIndex

Integer32 (0..2147483647)

read-create

This object indicates the outbound interface for sending LTMs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.13

hwDot1agCfmGmacTraceTimeOut

Unsigned32 (1..65535)

read-create

This object indicates the LTR timeout period.

The value ranges from 1 to 65535, in milliseconds.

The default value is 2000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.14

hwDot1agCfmGmacTraceDisplayHostInfo

INTEGER{true(1),false(2)}

read-create

This object indicates whether LTRs carry host information.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.15

hwDot1agCfmGmacTraceSendSeqNumber

INTEGER (0..4294967295)

read-only

This object indicates the sequence number of a sent LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.16

hwDot1agCfmGmacTraceResult

INTEGER

{

invalid(1),

successful(2),

failed(3)

}

read-only

The value of this object identifies the GMAC trace result. The value can be:

• 1: invalid
• 2: successful
• 3: failed

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.99

hwDot1agCfmGmacTraceRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status of this table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.1

hwDot1agCfmGmacTraceReplySeqNumber

INTEGER (0..4294967295)

not-accessible

This object indicates the sequence number of an LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.2

hwDot1agCfmGmacTraceReplyRecvOrder

INTEGER (0..4294967295)

not-accessible

This object indicates the display sequence of the GMAC trace result.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.3

hwDot1agCfmGmacTraceReplyTTL

Unsigned32 (0..255)

read-only

This object indicates the value of the TTL field in an LTR.

The value ranges from 0 to 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.4

hwDot1agCfmGmacTraceReplyForwarded

INTEGER{true(1),false(2)}

read-only

This object indicates whether LTRs are forwarded.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.5

hwDot1agCfmGmacTraceReplyHostInfo

OCTET STRING

read-only

This object indicates the host name and each hop's IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.6

hwDot1agCfmGmacTraceReplyRelayAction

INTEGER{rlyHit(1),rlyFdb(2),rlyMpdb(3),rlyInvalid(255)}

read-only

This object indicates the value of the Relay Action field in an LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.7

hwDot1agCfmGmacTraceReplyIngressAction

INTEGER{ingOk(1),ingDown(2),ingBlocked(3),ingVid(4),ingInvalid(255)}

read-only

This object indicates the value of the Ingress Action field in an LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.8

hwDot1agCfmGmacTraceReplyIngressMac

OCTET STRING (SIZE (6))

read-only

This object indicates the value of the Ingress MAC address field in an LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.9

hwDot1agCfmGmacTraceReplyIngressIfName

OCTET STRING

read-only

This object indicates the name of the inbound interface of an LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.10

hwDot1agCfmGmacTraceReplyEgressAction

INTEGER{egrOK(1),egrDown(2),egrBlocked(3),egrVid(4),egrInvalid(255)}

read-only

This object indicates the value of the Egress Action field in an LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.11

hwDot1agCfmGmacTraceReplyEgressMAC

OCTET STRING (SIZE (6))

read-only

This object indicates the value of the Egress MAC address field in an LTR.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.12

hwDot1agCfmGmacTraceReplyEgressIfName

OCTET STRING

read-only

This object indicates the name of a forwarding interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.1

hwDot3ahEfmAdminState

INTEGER{enabled(1),disabled(2)}

Read-write

This object indicates the OAM management mode on the interface: enabling and disabling.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.3

hwDot3ahEfmMode

INTEGER

{

active(1),

passive(2)

}

Read-write

This object indicates the active or passive mode of the interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.4

hwDot3ahEfmMaxOamPduSize

Unsigned32 (64..1518)

Read-only

This object indicates the maximum size of the OAMPDU.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.6

hwDot3ahEfmFunctionsSupported

BITS

{

unidirectionalSupport(0),

loopbackSupport(1),

eventSupport(2),

variableSupport(3)

}

Read-only

This object indicates the OAM methods supported by the Ethernet interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.7

hwDot3ahEfmTimeout

Unsigned32 (3000..30000)

Read-write

This object indicates the timeout period for waiting for OAM PDUs.

The default value is 5000 in Millisecond.

This object is mutually exclusive with the hwDot3ahEfmDetectMode [11] object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.1

hwDot3ahEfmPeerMacAddress

OCTET STRING

Read-only

This object indicates the peer MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.4

hwDot3ahEfmPeerMode

INTEGER

{

active(1),

passive(2),

unknown(3)

}

Read-only

This object indicates the operating mode of the peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.5

hwDot3ahEfmPeerMaxOamPduSize

Unsigned32 (0..65535)

Read-only

This object indicates the maximum OAMPDU size of the peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7

hwDot3ahEfmPeerFunctionsSupported

BITS

{

unidirectionalSupport(0),

loopbackSupport(1),

eventSupport(2),

variableSupport(3)

}

Read-only

This object indicates that four bits are used by the peer to support the four functions.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.1

hwDot3ahEfmLoopbackStatus

INTEGER

{

noLoopback(1),

initiatingLoopback(2),

remoteLoopback(3),

terminatingLoopback(4),

localLoopback(5),

unknown(6)

}

Read-write

This object indicates that the index is the interface number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.2

hwDot3ahEfmLoopbackIgnoreRx

INTEGER

{

ignore(1),

process(2)

}

read-write

The default is process.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.3

hwDot3ahEfmLoopbackTimeout

Unsigned32 (0..1000)

read-write

The interval for remote loopback.

The default is 20 minutes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.1

hwDot3ahEfmErrSymPeriodWindowHi

INTEGER (0..4294967295)

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the interval for monitoring error codes. It is represented by the number of frames per unit of time. The default value of the interval for monitoring error codes is one second.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.2

hwDot3ahEfmErrSymPeriodWindowLo

INTEGER (0..4294967295)

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the interval for monitoring error codes. It is represented by the number of frames per unit of time. The default value of the interval for monitoring error codes is one second.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.3

hwDot3ahEfmErrSymPeriodThresholdHi

INTEGER (0..4294967295)

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the threshold of error codes. The default value is 1. The threshold can be set to 0. At this time, the threshold-crossing alarm is reported periodically. It is used to asynchronously notify the threshold-crossing alarm to the peer.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.4

hwDot3ahEfmErrSymPeriodThresholdLo

INTEGER (0..4294967295)

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the threshold of error codes. The default value is 1. The threshold can be set to 0. At this time, the threshold-crossing alarm is reported periodically. It is used to asynchronously notify the threshold-crossing alarm to the peer.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.5

hwDot3ahEfmErrSymPeriodEvNotifEnable

INTEGER{true(1),false(2)}

Read-write

By default, the value is false.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.9

hwDot3ahEfmErrFrameWindow

INTEGER (0..4294967295)

Read-write

This object indicates the monitoring interval. The unit is 100 ms. By default, the value is 10 (1 second).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.10

hwDot3ahEfmErrFrameThresHold

INTEGER (0..4294967295)

Read-write

This object indicates that the threshold value, which is 1 by default, can be set to 0. At this time, the threshold-crossing alarm is reported periodically. It is used to asynchronously notify the threshold-crossing alarm to the peer.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.11

hwDot3ahEfmErrFrameEvNotifEnable

INTEGER{true(1),false(2)}

Read-write

By default, the value is false.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.12

hwDot3ahEfmErrFrameSecsSummaryWindow

Integer32 (100..9000)

Read-write

This object indicates the statistics interval. The unit is 100 ms. By default, the value is 600 (60 seconds). The value ranges from 100 to 9000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.13

hwDot3ahEfmErrFrameSecsSummaryThreshold

Integer32 (0..900)

Read-write

The value ranges from 0 to 900. The default value is 1. It can be set to 0.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.14

hwDot3ahEfmErrFrameSecsEvNotifEnable

INTEGER{true(1),false(2)}

Read-write

By default, the value is false.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.17

hwDot3ahEfmThresholdTriggerErrDown

INTEGER{enabled(1),disabled(2)}

Read-write

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.1

hwDot3ahEfmEventLogIndex

INTEGER (0..4294967295)

Not-accessible

This object indicates the single event in the log of any int type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.2

hwDot3ahEfmEventLogTimestamp

TimeTicks

Read-only

This object indicates the time of storing the event in the log.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.3

hwDot3ahEfmEventLogOui

OCTET STRING (SIZE (3))

Read-only

This object indicates the OUI of the event. The OUI of the 802.3ah standard event is 0x0180C2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.4

hwDot3ahEfmEventLogType

INTEGER (0..4294967295)

Read-only

Currently, the erroredFramePeriodEvent is not supported.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.5

hwDot3ahEfmEventLogLocation

INTEGER

{

local(1),

remote(2)

}

Read-only

This object indicates that the event is a local one or a remote one.1: the local event; 2: the remote event.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.6

hwDot3ahEfmEventLogWindowHi

INTEGER (0..4294967295)

Read-only

This object indicates that if the event is a threshold-crossing one, the two values of unsigned32 are combined together to indicate the monitoring interval.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.7

hwDot3ahEfmEventLogWindowLo

INTEGER (0..4294967295)

Read-only

This object indicates that if the event is a threshold-crossing one, the two values of unsigned32 are combined together to indicate the monitoring interval.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.8

hwDot3ahEfmEventLogThresholdHi

INTEGER (0..4294967295)

Read-only

This object indicates that if the event is a threshold-crossing one, the two values of unsigned32 are combined together to indicate the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.9

hwDot3ahEfmEventLogThresholdLo

INTEGER (0..4294967295)

Read-only

This object indicates that if the event is a threshold-crossing one, the two values of unsigned32 are combined together to indicate the threshold value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.10

hwDot3ahEfmEventLogValue

Counter64

Read-only

This object indicates the number of times that the threshold-crossing events occur (the accurate value that exceeds the threshold).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.11

hwDot3ahEfmEventLogRunningTotal

Counter64

Read-only

This object indicates the number of times that the events occur.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.12

hwDot3ahEfmEventLogEventTotal

INTEGER (0..4294967295)

Read-only

This object indicates the number of times that the events cause notification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.1

hwDot3ahEfmTriggerIfDown

INTEGER{enabled(1),disabled(2)}

Read-write

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.2

hwDot3ahEfmHoldUpTime

Integer32 (0..50)

Read-write

This object indicates the auto-recovery delay before an interface goes administratively Up.

The value ranges from 0 to 50, in seconds.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.1

hwDot3ahEvrrpCpuState

INTEGER

{

master(1),

slave(2),

unknown(3)

}

Read-only

The default value is unknown.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.1

hwTestMessageIndex

INTEGER (0..4294967295)

Not-accessible

This object indicates the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.11

hwTestMessageMacAddress

OCTET STRING (SIZE (6))

Read-create

This object indicates the destination MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.12

hwTestMessageVlanID

INTEGER (0..4294967295)

Read-create

This object indicates the VLAN index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.13

hwTestMessageInterface

Octet String

Read-create

This object indicates the name of the interface if an interface is specified.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.14

hwTestMessageServiceInstance

Octet String

Read-create

This object indicates the name of the Service Instance (SI) if a tunnel is specified.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.15

hwTestMessagePacketSize

Unsigned32 (64..1518)

Read-create

This object indicates the length of the sent test packet, in bytes.

The value ranges from 64 to 1518.

By default, the value is 64.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.16

hwTestMessageSendPackets

Unsigned32 (1..65535)

Read-create

This object indicates the number of sent test packets.

The value is an integer that ranges from 1 to 65535.

By default, the value is 5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.18

hwTestMessageSendEnabled

INTEGER{true(1),false(2)}

Read-create

This object indicates and sending and end of test packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.19

hwTestMessageSendFinished

HwTestMessageFinishedValue

Read-only

This object indicates whether test packets stop to be sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.51

hwTestMessageRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.11

hwTestMessageResultSendPackets

INTEGER (0..4294967295)

Read-only

This object indicates the number of sent packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.12

hwTestMessageResultReceivedPackets

INTEGER (0..4294967295)

Read-only

This object indicates the number of received packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.13

hwTestMessageResultPacketsLost

INTEGER (0..4294967295)

Read-only

This object indicates the packet loss ratio.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.14

hwTestMessageResultSendBytes

INTEGER (0..4294967295)

Read-only

This object indicates the number of sent bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.15

hwTestMessageResultReceivedBytes

INTEGER (0..4294967295)

Read-only

This object indicates the number of received bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.16

hwTestMessageResultBytesLost

INTEGER (0..4294967295)

Read-only

This object indicates the number of lost bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.17

hwTestMessageBeginTimeStamp

TimeTicks

Read-only

This object indicates the time of starting the test operation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.18

hwTestMessageEndTimeStamp

TimeTicks

Read-only

This object indicates the time of ending the test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.1

hwDot1agCfmQueryMdName

OCTET STRING (SIZE (1..43))

Not-accessible

This object indicates the name of the Maintenance Domain.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.2

hwDot1agCfmQueryMdIndex

INTEGER (0..4294967295)

Read-only

This object indicates the index to the Maintenance Domain table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.1

hwDot1agCfmQueryMaName

OCTET STRING (SIZE (1..43))

Not-accessible

This object indicates the name of Maintenance Association.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.2

hwDot1agCfmQueryMaIndex

INTEGER (0..4294967295)

Read-only

This object indicates the index to the Maintenance Association table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.1

hwCfmOneDelayTrapLogMacAddress

OCTET STRING (SIZE (6))

Accessible-for-notify

This object indicates the source MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.2

hwCfmVlanOneDelayTrapLogTimestamp

TimeTicks

Accessible-for-notify

This object indicates the timestamp when the one-way delay over the VLAN exceeds the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.3

hwCfmVlanOneDelayTrapLogDelayValue

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the statistics on the one-way delay over the VLAN when a trap is generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.4

hwCfmVlanOneDelayTrapLogThreshold

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the trap threshold for the one-way delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.1

hwCfmOneDelayRecoveryTrapMacAddress

OCTET STRING (SIZE (6))

Accessible-for-notify

This object indicates the destination MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.2

hwCfmVlanOneDelayRecoveryTrapLogTimestamp

TimeTicks

Accessible-for-notify

This object indicates the timestamp when the one-way delay over the VLAN reduces below the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.3

hwCfmVlanOneDelayRecoveryTrapLogDelayValue

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the statistics on the one-way delay over the VLAN when a trap is recovered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.4

hwCfmVlanOneDelayRecoveryTrapLogThreshold

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the trap threshold for the one-way delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.1

hwCfmTwoDelayTrapMacAddress

OCTET STRING (SIZE (6))

Accessible-for-notify

This object indicates the source MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.2

hwCfmVlanTwoDelayTrapLogTimestamp

TimeTicks

Accessible-for-notify

This object indicates the timestamp when the two-way delay over the VLAN exceeds the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.3

hwCfmVlanTwoDelayTrapLogDelayValue

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the statistics on the two-way delay over the VLAN when a trap is generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.4

hwCfmVlanTwoDelayTrapLogThreshold

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the statistics on the two-way delay over the VLAN when a trap is recovered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.1

hwCfmTwoDelayRecoveryTrapMacAddress

OCTET STRING (SIZE (6))

Accessible-for-notify

This object indicates the destination MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.2

hwCfmVlanTwoDelayRecoveryTrapLogTimestamp

TimeTicks

Accessible-for-notify

This object indicates the timestamp when the two-way delay over the VLAN reduces below the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.3

hwCfmVlanTwoDelayRecoveryTrapLogDelayValue

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the statistics on the two-way delay when a trap is recovered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.4

hwCfmVlanTwoDelayRecoveryTrapLogThreshold

INTEGER (0..4294967295)

Accessible-for-notify

This object indicates the trap threshold for the two-way delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.1

hwY1731PwMeasureMode

INTEGER { invalid(1), symmetry(2), asymmetry(3) }

Read-write

When the MA map to a VLAN, the value of this object is invalid.

When the MA map to a VSI or VLL the default value of this object is asymmetry.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.2

hwY1731OneDelayThreshold

INTEGER (0..4294967295)

Read-write

This object indicates the threshold for one-way delay measurement.

If hwY1731OneDelayThreshold is set to 0, the default alarm threshold of the one-way frame delay is used. By default, no alarm threshold of the one-way frame delay is set.

Currently, the threshold can be set only when one-way delay measurement is configured in a VLAN.

1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.3

hwY1731TwoDelayThreshold

INTEGER (0..4294967295)

Read-write

This object indicates the threshold for two-way delay measurement.

If hwY1731TwoDelayThreshold is set to 0, the default alarm threshold of the two-way frame delay is used. By default, no alarm threshold of the two-way frame delay is set.

Currently, the threshold can be set only when two-way delay measurement is configured in a VLAN.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.1

hwY1731RemoteIp

OCTET STRING (SIZE (4))

Not-accessible

This object indicates the IP address of the peer device. The value is set only in the case of an inward-facing MEP in a VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.2

hwY1731VcId

INTEGER (0..4294967295)

Not-accessible

This object indicates the VC ID of the peer device. The value is set only in the case of an inward-facing MEP in a VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.3

hwY1731MacAddress

OCTET STRING (SIZE (6))

Not-accessible

This object indicates the MAC address of the peer device. The value is not required currently.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.4

hwY1731ResvIndex

Integer32

Not-accessible

This object indicates the preserved index value. The value is not required currently.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.5

hwY1731ServiceType

INTEGER

{

vlan(1),

vsi(2),

vll(3),

unknown(4),

unbind(5)

}

Read-only

The value of this object identifies the service type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.7

hwY1731OneDelayRecvEnable

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether the 1DM receiving function is enabled on the local MEP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.8

hwY1731OneDelayRecvEnableIsContinue

INTEGER{true(1),false(2)}

Read-create

This object indicates whether 1DM frames to be received by the local MEP are sent during proactive one-way frame delay measurement.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.9

hwY1731TwoDelayRecvEnable

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether the 2DM receiving function is enabled on the local MEP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.15

hwY1731SingleLossMacAddress

OCTET STRING (SIZE (6))

Read-create

This object indicates the MAC address of the peer device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.22

hwY1731OneDelayEnable

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether one-way frame delay measurement is configured in the MA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.23

hwY1731OneDelayIsContinue

INTEGER{true(1),false(2)}

Read-create

This object indicates whether proactive one-way frame delay measurement is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.24

hwY1731OneDelayMepId

Integer32

(0 | 1..8191)

Read-create

This object indicates the MEP ID obtained by proactive one-way frame delay measurement. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.25

hwY1731OneDelayDestIsMepId

INTEGER{true(1),false(2)}

Read-create

This object indicates whether one-way frame delay measurement specifies the remote MEP ID as the destination.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.26

hwY1731OneDelayDestMepId

Integer32 (0 | 1..8191)

Read-create

This object indicates the remote MEP ID specified by one-way frame delay measurement. The value is 0 or ranges from 1 to 8191. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.27

hwY1731OneDelayMacAddress

OCTET STRING (SIZE (6))

Read-create

This object indicates the MAC address of the peer remote MEP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.28

hwY1731OneDelayInterval

INTEGER

{

invalid(1),

interval1s(2),

interval10s(3),

interval30s(4),

interval60s(5),

interval150s(6),

interval300s(7)

}

Read-create

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.29

hwY1731OneDelayCount

Integer32

(0 | 1..60)

Read-create

This object indicates the number of sent DMMs. This value is set only when on-demand one-way frame delay measurement is performed. When proactive one-way frame delay measurement is implemented, the value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.31

hwY1731TwoDelayEnable

INTEGER{enabled(1),disabled(2)}

Read-create

This object indicates whether two-way frame delay measurement is configured on the MA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.32

hwY1731TwoDelayIsContinue

INTEGER{true(1),false(2)}

Read-create

This object indicates whether proactive two-way frame delay measurement is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.33

hwY1731TwoDelayMepId

Integer32

(0 | 1..8191)

Read-create

This object indicates the MEP ID specified for two-way frame delay measurement. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.34

hwY1731TwoDelayDestIsMepId

INTEGER{true(1),false(2)}

Read-create

This object indicates whether two-way frame delay measurement specifies the remote MEP ID as the destination.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.35

hwY1731TwoDelayDestMepId

Integer32

(0 | 1..8191)

Read-create

This object indicates the remote MEP ID specified by two-way frame delay measurement. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.36

hwY1731TwoDelayMacAddress

OCTET STRING (SIZE (6))

Read-create

This object indicates the destination MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.37

hwY1731TwoDelayInterval

INTEGER

{

invalid(1),

interval1s(2),

interval10s(3),

interval30s(4),

interval60s(5),

interval150s(6),

interval300s(7)

}

Read-create

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.38

hwY1731TwoDelayCount

Integer32

(0 | 1..60)

Read-create

This object indicates the number of sent DMMs. This value is set only when on-demand two-way frame delay measurement is performed. When proactive two-way frame delay measurement is implemented, the value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.1

hwY1731AisEnable

INTEGER{enabled(1),disabled(2)}

Read-create

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.2

hwY1731AisSendLevel

Integer32 (-1 | 0..7)

Read-create

This object indicates the level of the sent AIS frame.

The value can be -1 or ranges from 0 to 7. The value -1 is an invalid value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.3

hwY1731AisSendInterval

INTEGER { interval1s(1), interval60s(2) }

Read-create

The default value is 1 second.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.4

hwY1731AisSendPktStatus

INTEGER{enabled(1),disabled(2)}

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.5

hwY1731AisSuppressEnable

INTEGER{enabled(1),disabled(2)}

Read-create

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.6

hwY1731AisSuppressStatus

INTEGER{enabled(1),disabled(2)}

Read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1.1

hwY1731AisLinkStatusIfIndex

INTEGER

Not-accessible

This object indicates the index of the interface which is monitored by AIS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1.20

hwY1731AisLinkRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the row status of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.1

hwY1731AisConfigPeVlan

Integer32 (0 | 1..4094)

Not-accessible

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.2

hwY1731AisConfigVlanListLow

OCTET STRING (SIZE(256))

Read-create

If hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 1 to 2047. The hwY1731AisConfigVlanListHigh value ranges 2048 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.3

hwY1731AisConfigVlanListHigh

OCTET STRING (SIZE(256))

Read-create

If hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 2048 to 4094. The hwY1731AisConfigVlanListLow value ranges value 1 to 2047.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.4

hwY1731AisVlanConfigRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

Read-create

This object indicates the status of a row in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1.1

hwY1731ResetStatisticType

INTEGER

{

invalid(1),

singleloss(2),

dualloss(3),

onewaydelay(4),

twowaydelay(5)

}

Read-write

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.12

hwY1731OneDelayStatistic

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the statistics about one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.13

hwY1731OneDelayVariation

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the jitter statistics about one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.14

hwY1731OneDelayMax

INTEGER (0..4294967295)

Read-only

This object indicates the maximum one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.15

hwY1731OneDelayMin

INTEGER (0..4294967295)

Read-only

This object indicates the minimum one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.16

hwY1731OneDelayAvg

INTEGER (0..4294967295)

Read-only

This object indicates the average one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.17

hwY1731TwoDelayStatistic

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the statistics about two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.18

hwY1731TwoDelayVariation

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the jitter statistics about two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.19

hwY1731TwoDelayMax

INTEGER (0..4294967295)

Read-only

This object indicates the maximum two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.20

hwY1731TwoDelayMin

INTEGER (0..4294967295)

Read-only

This object indicates the minimum two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.21

hwY1731TwoDelayAvg

INTEGER (0..4294967295)

Read-only

This object indicates the average two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.34

hwY1731TwoDelayUnresponsivePacketCount

INTEGER (0..4294967295)

read-only

This object indicates the number of unresponsive Delay Measurement Reply frames.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.35

Read-only

The value of this object identifies the 802.1p priority for single-ended frame loss measurement. Value 255 is invalid, indicating that no 802.1p priority is set.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.36

Read-only

The value of this object identifies the 802.1p priority for one-way delay measurement. Value 255 is invalid, indicating that no 802.1p priority is set.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.37

Read-only

The value of this object identifies the 802.1p priority for two-way delay measurement. Value 255 is invalid, indicating that no 802.1p priority is set.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.38

Read-only

This object indicates the date and time when on-demand one-way delay measurement starts.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.39

Read-only

This object indicates the date and time when on-demand two-way delay measurement starts.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.4

hwDot3ahEfmThresholdEvent

• hwDot3ahEfmEventLogTimestamp

• hwDot3ahEfmEventLogOui

• hwDot3ahEfmEventLogType

• hwDot3ahEfmEventLogLocation

• hwDot3ahEfmEventLogWindowHi

• hwDot3ahEfmEventLogWindowLo

• hwDot3ahEfmEventLogThresholdHi

• hwDot3ahEfmEventLogThresholdLo

• hwDot3ahEfmEventLogValue

• hwDot3ahEfmEventLogRunningTotal

• hwDot3ahEfmEventLogEventTotal

This object indicates threshold exceeding events.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.5

hwDot3ahEfmNonThresholdEvent

This object indicates non-threshold exceeding event. Such as LinkFault, DyingGaspEvent, Critical and LostLinkEvent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.17

hwDot3ahEfmNonThresholdRecovery

The recovery of the faulty link.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.29

hwDot3ahEfmLoopbackFailed

Interface starts loopback failed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.8

hwDot3ahEfmRemoteDyingGaspEvent

• hwDot3ahEfmPeerMacAddress

• ifDescr

An unrecoverable event occurs, for example, the system or a board restarts, or the device is powered off.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.23

hwCfmVlanOnewayDelay

In the VLAN networking, the one-way delay exceeded the trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.24

hwCfmVlanOnewayDelayRecovery

In the VLAN networking, the one-way delay fell below the trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.25

hwCfmVlanTwowayDelay

In the VLAN networking, the two-way delay exceeded the trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.26

hwCfmVlanTwowayDelayRecovery

In the VLAN networking, the two-way delay fell below the trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.6.30

hwY1731AisDefectAlarm

None.

This object indicates that a MEP receives an AIS PDU and enters the faulty state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.31

hwY1731AisDefectAlarmRecovery

None.

This object indicates that the MEP does not receive an AIS PDU within the AIS PDU timeout period and exits from the faulty state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.48

hwY1731AisExceedMaxPktNum

hwY1731AisMaxPktNum

This object indicates the number of AIS packets sent and received within 1s exceeded the alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.49

hwY1731AisExceedMaxPktNumCleared

None

This object indicates the number of AIS packets sent and received within 1s fell below the alarm threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.34

hwDot1agCfmMismerge

None.

A trap about MD or MA name inconsistency is received in the scenario where the MEP and RMEP have the same MD level.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.35

hwDot1agCfmMismergeCleared

None.

A trap about MD or MA name inconsistency is cleared in the scenario where the MEP and RMEP have the same MD level.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.36

hwDot1agCfmUnexpectedMEP

None.

A trap about a nonexistence MEP ID in the RMEP list is received in the scenario where the MEP and RMEP have the same MD level and MA ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.37

hwDot1agCfmUnexpectedMEPCleared

None.

A trap about nonexistence MEP ID in the RMEP list is cleared in the scenario where the MEP and RMEP have the same MD level and MA ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.38

hwDot1agCfmUnexpectedPeriod

None.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.39

hwDot1agCfmUnexpectedPeriodCleared

None.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.40

hwDot1agCfmUnexpectedMAC

None.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.41

hwDot1agCfmUnexpectedMACCleared

None.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.42

hwDot1agCfmLOC

None.

A trap is reported after the MEP does not receive a CCM within a period of time 3.5 times the interval at which CCMs are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.43

hwDot1agCfmLOCCleared

None.

A trap is cleared after the MEP receives a CCM within a period of time 3.5 times the interval at which CCMs are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.46

hwDot1agCfmRDI

None.

A MEP receives a CCM carrying an RDI flag with the value of 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.6.47

hwDot1agCfmRDICleared

None.

A MEP receives a CCM carrying an RDI flag with the values of 0.

This object is implemented as defined in the corresponding MIB file.