HUAWEI-WLAN-CAPWAP-MIB

1.3.6.1.4.1.2011.6.139.9.1.1

hwWlanCapwapSourceInterfaceValue

Integer32

read-write

This object indicates the interface number when hwWlanCapwapSourceInterfaceMethod is set to vlanif(2) or loopback(3).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.1.2

hwWlanCapwapSourceInterfaceMethod

INTEGER(1-4)

read-write

This object indicates the configuration method:

• 2: VLANIF method

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.1

hwWlanCapwapDtlsSwitch

INTEGER{enable(1),disable(2)}

read-write

This object indicates the status of the global DTLS function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.2

hwWlanCapwapDtlsPsk

OCTET STRING(1-32)

read-write

This object indicates a global DTLS PSK value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.3

hwWlanCapwapDtlsDefaultPskSwitch

INTEGER{enable(1),disable(2)}

read-write

This object indicates the status of the global DtlsDefaultPsk function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.6

hwWlanCapwapInterControllerDtlsPsk

OCTET STRING(1-32)

read-write

This object indicates DTLS PSK values between ACs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.7

hwCapwapEchoInterval

Integer32(20-300)

read-write

This object indicates the interval for sending Echo packets in a CAPWAP tunnel. The default value is 25. It is expressed in s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.8

hwCapwapEchoTimes

Integer32(3-120)

read-write

This object indicates Echo packet timeouts in a CAPWAP tunnel. If the specified value is exceeded, the AC and the AP are disconnected.

The default value is 6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.9

hwWlanCapwapControlPriorityLocal

Integer32

read-write

This object indicates the priority of CAPWAP control packets from ACs to APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.10

hwWlanCapwapControlPriorityRemote

Integer32

read-write

This object indicates the priority of CAPWAP control packets from APs to ACs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.11

hwWlanCapwapSensitiveInfoPsk

OCTET STRING(6-32)

This value is 0 if not specified, which is an invalid value.

read-write

This object indicates the pre-shared key used for sensitive information encryption.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.13

hwWlanCapwapMessageIntegrityPsk

OCTET STRING(6-32)

This value is 0 if not specified, which is an invalid value.

read-write

This object indicates the PSK for checking integrity of CAPWAP packets between the AC and APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.15

hwWlanCapwapMessageIntegrityPskMandatoryMatchSwitch

INTEGER[1,2]

read-write

This object indicates whether CAPWAP packets from APs can be successfully sent to the AC without integrity check.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.2.16

hwWlanCapwapMsgCheckSwitch

INTEGER[1,2]

read-write

This object indicates whether CAPWAP packet check is enabled between the AC and APs. The value 1 indicates Disable, and 2 Enable.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.3.1.1.1

hwWlanCapwapSourceIndex

Unsigned32

not-accessible

This object indicates the index of the CAPWAP source interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.3.1.1.2

hwWlanCapwapSourceMethod

INTEGER{vlanif(2),loopback(3)}

read-write

This object indicates the type of the CAPWAP source interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.3.1.1.3

hwWlanCapwapSourceValue

Integer32

read-write

This object indicates the value of the CAPWAP source interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.9.3.1.1.4

hwWlanCapwapSourceRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status of the table. createAndGo(4) and destroy(6) are the mainly used.

This object is implemented as defined in the corresponding MIB file.