HUAWEI-WLAN-GLOBAL-MIB

1.3.6.1.4.1.2011.6.139.12.1.1.2

hwWlanAccessMaxApNumber

Integer32

read-only

This object indicates the maximum number of APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.1.3

hwWlanAccessMaxStaNumber

Integer32

read-only

This object indicates the maximum number of STAs connected to an AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.1

hwWlanCurJointApNum

Integer32

read-only

This object indicates the number of APs currently connected to an AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.2

hwWlanCurAssocStaNum

Integer32

read-only

This object indicates the number of associated users on an AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.3

hwWlanCurAuthSuccessStaNum

Integer32

read-only

This object indicates the total number of online STAs on an AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.4

hwWlanReassocSuccessTimes

Integer32

read-only

This object indicates the number of successful roaming times on an AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.5

hwWlanCurAssoc2gStaNum

Integer32

read-only

This object indicates the total number of 2.4G users on an AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.6

hwWlanCurAssoc5gStaNum

Integer32

read-only

This object indicates the total number of 5G users on an AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.7

hwWlanDualBandStaNum

Integer32

read-only

This object indicates the number of dual-band STAs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.8

hwWlanGlobalUpSpeed

Unsigned32

read-only

This object indicates the upstream rate of the system (uplink throughput).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.9

hwWlanGlobalDownSpeed

Unsigned32

read-only

This object indicates the downstream rate of the system (downlink throughput).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.11

hwWlanCurAssoc2gStaType

String(1-250)

read-only

This object indicates the type of access STAs on the 2.4 GHz radio, including 802.11b, 802.11g, 802.11n 20 MHz, 802.11n 40 MHz, 802.11ax 20 MHz, and 802.11ax 40 MHz.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.2.12

hwWlanCurAssoc5gStaType

String(1-250)

read-only

This object indicates the type of access STAs on the 5 GHz radio, including 802.11a, 802.11n 20 MHz, 802.11n 40 MHz, 802.11ac 20 MHz, 802.11ac 40 MHz, 802.11ac 80 MHz, 802.11ac 160 MHz, 802.11ax 20 MHz, 802.11ax 40 MHz, 802.11ax 80 MHz, and 802.11ax 160 MHz.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.1

hwWlanStaRateComplianceRate

Integer32

read-only

This object indicates compliance ratio of the STA rate.

Unit: 0.01

Compliance standard: Rate > x (x = proportion of 12 Mbps STAs to the total number of STAs)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.2

hwWlanStaSnrComplianceRate

Integer32

read-only

This object indicates compliance ratio of STA signal-to-noise ratio (SNR).

Unit: 0.01

Compliance standard: SNR > x (x = 20 dB)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.3

hwWlanStaResendRateComplianceRate

Integer32

read-only

This object indicates compliance ratio of the STA retransmission rate (RR).

Unit: 0.01

Compliance standard: RR < x (x = 50%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.4

hwWlanStaDropRateComplianceRate

Integer32

read-only

This object indicates compliance ratio of the STA packet loss rate (PLR).

Unit: 0.01

Compliance standard: PLR < x (x = 5%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.5

hwWlanStaComplianceRate

Integer32

read-only

This object indicates the total STA compliance ratio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.6

hwStaSnrNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 2.4G SNR fails to meet the compliance standard.

Compliance standard: SNR > x (x = 20 dB)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.7

hwStaRateNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 2.4G rate fails to meet the compliance standard.

Compliance standard: Rate > x (x = 12 Mbps)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.8

hwStaResendRateNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 2.4G retransmission rate (RR) fails to meet the compliance standard.

Compliance standard: RR < x (x = 50%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.9

hwStaDropRateNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 2.4G packet loss rate (PLR) fails to meet the compliance standard.

Compliance standard: PLR < x (x = 5%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.10

hwStaThruputNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 2.4G throughput fails to meet the compliance standard. (Here the throughput refers to a sum of the uplink and the downlink throughput.)

Compliance standard: Throughput > x (x = 12 Mbps)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.11

hwStaSnrNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 5G SNR fails to meet the compliance standard.

Compliance standard: SNR > x (x = 20 dB)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.12

hwStaRateNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 5G rate fails to meet the compliance standard.

Compliance standard: Rate > x (x = 12 Mbps)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.13

hwStaResendRateNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 5G retransmission rate (RR) fails to meet the compliance standard.

Compliance standard: RR < x (x = 50%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.14

hwStaDropRateNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 5G packet loss rate (PLR) fails to meet the compliance standard.

Compliance standard: PLR < x (x = 5%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.15

hwStaThruputNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of STAs whose 5G throughput fails to meet the compliance standard. (Here the throughput refers to a sum of the uplink and the downlink throughput.)

Compliance standard: Throughput > x (x = 12 Mbps)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.16

hwStaGlobalWirelessPacketDelay

Unsigned32

read-only

This object indicates the average delay for sending packets by online STAs, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.17

hwStaGlobalWirelessPacketDropRate

Unsigned32

read-only

This object indicates the packet loss ratio of access users.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.18

hwStaGlobalTotalAccessTime

Unsigned32

read-only

This object indicates the total online duration of a STA, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.19

hwStaGlobalAccessExperience

OCTET STRING

read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.20

hwStaGlobalAssocRate

Unsigned32

read-only

This object indicates the number of STAs that can be associated per second.

Statistics interval: 5 seconds

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.21

hwStaGlobalAuthRateDot1x

Unsigned32

read-only

This object indicates the number of STAs that can be authenticated in 802.1X mode per second.

Statistics interval: 5 seconds

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.22

hwStaGlobalAuthRatePortal

Unsigned32

read-only

This object indicates the number of STAs that can be authenticated in Portal mode per second.

Statistics interval: 5 seconds

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.3.23

hwStaGlobalAuthRateMac

Unsigned32

read-only

This object indicates the number of STAs that can be authenticated in MAC address mode per second.

Statistics interval: 5 seconds

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.1

hwWlanRfChannelUtilRateComplianceRate

Integer32

read-only

This object indicates compliance ratio of the RF channel utilization.

Unit: 0.01

Compliance standard: Channel utilization < x (x = 70%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.2

hwWlanRfNoiseComplianceRate

Integer32

read-only

This object indicates compliance ratio of the RF noise intensity.

Unit: 0.01

Compliance standard: Noise intensity < x (x = -80 dBm)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.3

hwWlanRfChannelJamRateComplianceRate

Integer32

read-only

This object indicates compliance ratio of the RF interference ratio.

Unit: 0.01

Compliance standard: Interference ratio < x (x = 40%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.4

hwWlanRfResendRateComplianceRate

Integer32

read-only

This object indicates the compliance ratio of the RF retransmission rate (RR).

Unit: 0.01

Compliance standard: RR < x (x = 50%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.5

hwWlanRfDropRateComplianceRate

Integer32

read-only

This object indicates the compliance ratio of the RF packet loss rate (PLR).

Unit: 0.01

Compliance standard: PLR < x (x = 5%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.6

hwWlanRfComplianceRate

Integer32

read-only

This object indicates the total RF compliance ratio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.7

hwWlanRfNoiseNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 2.4G noise intensity fails to meet the compliance standard.

Compliance standard: Noise intensity < x (x = -80 dBm)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.8

hwWlanRfChannelUtilRateNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 2.4G channel utilization fails to meet the compliance standard.

Compliance standard: Channel utilization < x (x = 70%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.9

hwWlanRfLoadNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 2.4G load fails to meet the compliance standard.

Compliance standard: Number of online users < x (x = 40)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.10

hwWlanRfChannelJamRateNoncompliance2gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 2.4G interference ratio fails to meet the compliance standard.

Compliance standard: Interference ratio < x (x = 40%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.11

hwWlanRfNoiseNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 5G noise intensity fails to meet the compliance standard.

Compliance standard: Noise intensity < x (x = -80 dBm)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.12

hwWlanRfChannelUtilRateNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 5G channel utilization fails to meet the compliance standard.

Compliance standard: Channel utilization < x (x = 70%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.13

hwWlanRfLoadNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 5G load fails to meet the compliance standard.

Compliance standard: Number of online users < x (x = 40)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.4.14

hwWlanRfChannelJamRateNoncompliance5gCnt

Unsigned32

read-only

This object indicates the number of radios on which the 5G interference ratio fails to meet the compliance standard.

Compliance standard: Interference ratio < x (x = 40%)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.5.1

hwWlanApNormalRatio

Integer32

read-only

This object indicates the proportion of APs in normal and commit states to all APs.

Unit: 0.01

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.5.2

hwWlanApStaOnlineFailRateComplianceRate

Integer32

read-only

This object indicates compliance ratio of the AP's STA access failure rate.

Unit: 0.01

Compliance standard: STA access failure rate < x (x = 20%) Access failure rate = (hwStaAccessRequestFailedCount+hwStaAuthenRequestFailedCount)/(hwStaAssocAndReAssocRequestCount+hwStaAuthenRequestCount)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.5.3

hwWlanApStaOfflineRateComplianceRate

Integer32

read-only

This object indicates compliance ratio of the AP's STA offline rate.

Unit: 0.01

Compliance standard: STA offline rate x (x = 20%) Offline rate = hwStaExceptionalOfflineCnt/hwStaAuthenRequestSuccessCount. Abnormal APs are those in fault, version mismatch, and type mismatch.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.5.4

hwWlanApStaOnlineCntComplianceRate

Integer32

read-only

This object indicates compliance ratio of the number of access STAs on an AP.

Unit: 0.01

Compliance standard: Access STAs < x (x = 40). Access STAs refer to online STAs. Abnormal APs are those in fault, version mismatch, and type mismatch.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.5.5

hwWlanApComplianceRate

Integer32

read-only

This object indicates the total AP compliance ratio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.5.6

hwWlanServiceNormalAPCount

Unsigned32

read-only

This object indicates the number of APs in normal, standby, committing, and download state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.5.7

hwWlanApCount

Unsigned32

read-only

This object indicates the total number of APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.6.1.1

hwWlanOnlineStaCntTime

Unsigned32

not-accessible

This object indicates the count time. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.6.1.2

hwWlanOnlineStaCnt

Integer32

read-only

This object indicates the number of access users.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.6.1.3

hwWlan2gOnlineStaCnt

Integer32

read-only

This object indicates the number of users connected to the 2.4G radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.6.1.4

hwWlan5gOnlineStaCnt

Integer32

read-only

This object indicates the number of users connected to the 5G radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.7.1.1

hwWlanSpeedHistoryTime

Unsigned32

not-accessible

This object indicates the statistics collection time. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.7.1.2

hwWlanUpSpeedHistory

Integer32

read-only

This object indicates the valid uplink throughput of all APs, in Kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.7.1.3

hwWlanDownSpeedHistory

Integer32

read-only

This object indicates the valid downlink throughput of all APs, in Kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.9.1.1

hwWlanApGpStatAPGroupName

OCTET STRING

not-accessible

This object indicates the table index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.9.1.2

hwWlanApGpStatCurAssoc2gStaNum

Unsigned32

read-only

This object indicates the number of 2.4 GHz users in an AP group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.1.9.1.3

hwWlanApGpStatCurAssoc5gStaNum

Unsigned32

read-only

This object indicates the number of 5 GHz users in an AP group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.3.1.11

hwWlanWapiCertificateNearlyExpiredTrap

• hwWlanWapiSecurityProfileName: indicates the name of a bound security profile.
• hwWlanWapiCertType: indicates the WAPI certificate type.
• hwWlanWapiCertFileName: indicates the name of a WAPI certificate file.
• hwWlanWapiCertStartTime: indicates the start time of WAPI certificate validity.
• hwWlanWapiCertEndTime: indicates the end time of WAPI certificate validity.

This object indicates that a WAPI certificate is to expire.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.3.1.12

hwWlanWapiCertificateNearlyExpiredTrapRestore

• hwWlanWapiSecurityProfileName: indicates the name of a bound security profile.
• hwWlanWapiCertType: indicates the WAPI certificate type.

This object indicates the WAPI certificate expiration alarm is cleared.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.3.1.13

hwWlanWapiCertificateInvalidTrap

• hwWlanWapiSecurityProfileName: indicates the name of a bound security profile.
• hwWlanWapiCertType: indicates the WAPI certificate type.
• hwWlanWapiCertFileName: indicates the name of a WAPI certificate file.
• hwWlanWapiCertStartTime: indicates the start time of WAPI certificate validity.
• hwWlanWapiCertEndTime: indicates the end time of WAPI certificate validity.

This object indicates that the WAPI certificate is not within the validity period.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.12.3.1.14

hwWlanWapiCertificateInvalidTrapRestore

• hwWlanWapiSecurityProfileName: indicates the name of a bound security profile.
• hwWlanWapiCertType: indicates the WAPI certificate type.

This object indicates that the WAPI certificate is within the validity period.

This object is implemented as defined in the corresponding MIB file.