Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NTDP
This section describes the configuration model of NTDP and provides examples of XML packets.
Data Model
The configuration model file matching NTDP is huawei-ntdp.yang.
Table 2-76 Configuring NTDP
Object |
Description |
Value |
Remarks |
|---|---|---|---|
/huawei-ntdp/ntdp/enabled |
Enables NTDP globally. |
The value is of the Boolean type:
|
N/A |
Enabling NTDP Globally
This section provides a sample of enabling NTDP globally using the rpc method.
Table 2-77 Enabling NTDP globally
Operation |
XPATH |
|---|---|
edit-config:create |
/huawei-ntdp/ntdp/enabled |
Data Requirements
Table 2-78 Enabling NTDP globally
Item |
Data |
Description |
|---|---|---|
Whether NTDP is enabled globally |
true |
Enable NTDP globally. |
Request Example
<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="0" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<huawei-ntdp:ntdp xmlns:huawei-ntdp="urn:huawei:params:xml:ns:yang:huawei-ntdp">
<huawei-ntdp:enabled>true</huawei-ntdp:enabled>
</huawei-ntdp:ntdp>
</config>
</edit-config>
</rpc>
Response Example
Sample of successful response
<?xml version='1.0' encoding='UTF-8'?> <rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="0"> <ok/> </rpc-reply>
Sample of failed response
<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
<rpc-error>
<error-type>application</error-type>
<error-tag>operation-failed</error-tag>
<error-severity>error</error-severity>
<error-message>parse rpc config error.</error-message>
</rpc-error>
</rpc-reply>