Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI_1.3.6.1.4.1.2011.6.122.34.0.2.28 hwPKIGetCrlFailScep
Description
PKI/4/PKIGETCRLFAILSCEP: OID [OID] get crl unsuccessfully with SCEP. (CrlUrl=[CrlUrl])
Failed to obtain the CRL using SCEP.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.122.34.0.2.28 | Warning | communicationsAlarm |
Parameters
| Name | Meaning |
|---|---|
| OID | Indicates the MIB object ID of the alarm. |
| CrlUrl | CRL distribution point (CDP) URL |
Procedure
- Run the ping command to check whether a reachable route exists between the device and CA server.
- If so, go to step 2.
- If not, check the route and link to ensure that there is a reachable route between the device and CA server.
- Check whether PKI configurations of the device and CA server are correct, including the CRL URL, CA name, challenge password used in SCEP certificate application, and CA certificate digital fingerprint.
- If not, ensure that PKI configurations are correct.
- If so, go to step 3.
- Collect alarm and configuration information, and contact technical support personnel.