Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MAD
MAD_1.3.6.1.4.1.2011.5.25.246.1.1 hwMadConflictDetect
Description
MAD/4/MULTIACTIVEDETECTED: OID [oid] Multi-active scenario is detected.
A multi-active scenario was detected.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.246.1.1 | Warning | equipmentAlarm(5) |
Impact on the System
Switches with the same IP address, MAC address, and global configuration are working properly. As a result, an address conflict occurs.
Procedure
- Run the display device command to check whether the stack splits.
- If so, go to step 2.
- If not, go to step 3.
- Check whether the stack cable is loose. If so, reconnect it securely. If the indicator of the stack port still does not turn green, replace the cable. If the alarm is not cleared after the cable is replaced, go to step 4.
- Check whether the alarm is cleared.
- If so, no action is required.
- If not, go to step 4.
- Collect alarm information and configuration information, and then contact technical support personnel.