MRM
MRM_1.3.6.1.4.1.2011.5.25.149.1.2.13 hwIpMcastSGThresholdExceed
Description
MRM/3/hwIpMcastSGThresholdExceed:OID [oid] Multicast routing total (S, G) entries of all instances count reached the upper threshold. (hwIpMcastSGCurrentCount=[integer], hwIpMcastSGThreshold=[integer]%, hwIpMcastSGTotalCount=[integer])
The proportion of global (S, G) multicast forwarding entries created to the maximum global (S, G) multicast forwarding entries allowed reached the upper alarm threshold.
Attribute
Alarm ID | Alarm Severity | Alarm Type |
---|---|---|
1.3.6.1.4.1.2011.5.25.149.1.2.13 |
Minor |
communicationsAlarm |
Parameters
Name | Meaning |
---|---|
oid |
Indicates the MIB object ID of the alarm. |
hwIpMcastSGCurrentCount |
Number of global (S, G) multicast forwarding entries created |
hwIpMcastSGThreshold |
Alarm threshold for global (S, G) multicast forwarding entries |
hwIpMcastSGTotalCount |
Maximum number of global (S, G) multicast forwarding entries allowed |
Impact on the System
If you continue to configure multicast services after this alarm is reported, new multicast services may fail to be provisioned due to the lack of (S, G) multicast forwarding entry resources.
Possible Causes
The proportion of global (S, G) multicast forwarding entries created to the maximum global (S, G) multicast forwarding entries allowed reached the upper alarm threshold.
Procedure
- Check whether the upper alarm threshold is too low in the
configuration file.
If the threshold is too low, go to Step 2.
If the threshold is not low, go to Step 3.
- Run the multicast forwarding-table source-group-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command in the multicast MIB view to set the upper alarm threshold to a larger value.
- Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
- End.
MRM_1.3.6.1.4.1.2011.5.25.149.1.2.14 hwIpMcastSGThresholdExceedClear
Description
MRM/3/hwIpMcastSGThresholdExceedClear:OID [oid] Multicast routing total (S, G) entries of all instances count fell below the lower threshold. (hwIpMcastSGCurrentCount=[integer], hwIpMcastSGThreshold=[integer]%, hwIpMcastSGTotalCount=[integer])
The proportion of global (S, G) multicast forwarding entries created to the maximum global (S, G) multicast forwarding entries allowed fell below the lower alarm threshold.
Attribute
Alarm ID | Alarm Severity | Alarm Type |
---|---|---|
1.3.6.1.4.1.2011.5.25.149.1.2.14 |
Minor |
communicationsAlarm |
Parameters
Name | Meaning |
---|---|
oid |
Indicates the MIB object ID of the alarm. |
hwIpMcastSGCurrentCount |
Number of global (S, G) multicast forwarding entries created |
hwIpMcastSGThreshold |
Alarm threshold for global (S, G) multicast forwarding entries |
hwIpMcastSGTotalCount |
Maximum number of global (S, G) multicast forwarding entries allowed |
MRM_1.3.6.1.4.1.2011.5.25.149.1.2.15 hwIpMcastSGExceed
Description
MRM/3/hwIpMcastSGExceed:OID [oid] Multicast routing total (S, G) entries of all instances cannot be created because the limit is reached. (hwIpMcastSGTotalCount=[integer])
The number of global (S, G) multicast forwarding entries created exceeded the maximum number of global (S, G) multicast forwarding entries allowed.
Attribute
Alarm ID | Alarm Severity | Alarm Type |
---|---|---|
1.3.6.1.4.1.2011.5.25.149.1.2.15 |
Minor |
communicationsAlarm |
Parameters
Name | Meaning |
---|---|
oid |
Indicates the MIB object ID of the alarm. |
hwIpMcastSGTotalCount |
Maximum number of global (S, G) multicast forwarding entries allowed |
MRM_1.3.6.1.4.1.2011.5.25.149.1.2.16 hwIpMcastSGExceedClear
Description
MRM/3/hwIpMcastSGExceedClear:OID [oid] Multicast routing total (S, G) entries can be created because the number of multicast routing (S, G) entries of all instances fell below the limit. (hwIpMcastSGTotalCount=[integer])
The number of global (S, G) multicast forwarding entries created fell below the maximum global (S, G) multicast forwarding entries allowed and new (S, G) multicast forwarding entries could be created again.
Attribute
Alarm ID | Alarm Severity | Alarm Type |
---|---|---|
1.3.6.1.4.1.2011.5.25.149.1.2.16 |
Minor |
communicationsAlarm |
Parameters
Name | Meaning |
---|---|
oid |
Indicates the MIB object ID of the alarm. |
hwIpMcastSGTotalCount |
Maximum number of global (S, G) multicast forwarding entries allowed |