No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
S1700, S2720, S5700, and S6700 V200R019C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AAA

AAA

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.53 hwMacMovedQuietMaxUserAlarm

Description

AAA/4/MACMOVEDQUIETMaxUserAlarm: OID [OID] The number of mac moved quiet users reached the maximum.(Spec of User Num:[INTEGER1] Current Threshold:[INTEGER2] Lower Threshold:[INTEGER3]% Upper Threshold:[INTEGER4]%)

The percentage of current MAC address migration users in quiet state against the maximum number of users exceeds the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.2.2.2.0.53 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning
[OID] Indicates the MIB object ID of the alarm.
Spec of User Num: [INTEGER1] Indicates the maximum number of MAC address migration users in quiet state.
Current Threshold:[INTEGER2] Indicates the percentage of current MAC address migration users in quiet state against the maximum number of users.
Lower Threshold:[INTEGER3]% Indicates the lower alarm threshold for the percentage of MAC address migration users in quiet state against the maximum number of users.
Upper Threshold:[INTEGER4]% Indicates the upper alarm threshold for the percentage of MAC address migration users in quiet state against the maximum number of users.

Impact on the System

None

Possible Causes

The percentage of current MAC address migration users in quiet state against the maximum number of users exceeds the upper alarm threshold.

Procedure

  1. Run the display authentication mac-move configuration command in any view to check whether the upper threshold of MAC address migration users in quiet state is set.

    • If it is configured, consider whether to delete it.
    • If it is not configured, adjust the network based on the number of access users. If the problem persists, go to 2.

  2. Collect log information and contact technical support personnel.

Related Information

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.54 hwMacMovedQuietUserClearAlarm

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.54 hwMacMovedQuietUserClearAlarm

Description

AAA/4/MACMOVEDQUIETUserClearAlarm: OID [OID] The MAC Moved Quiet Max User Alarm is cleared.(Spec of User Num:[INTEGER] Current Threshold:[INTEGER] Lower Threshold:[INTEGER]% Upper Threshold:[INTEGER]%)

The percentage of current MAC address migration users in quiet state against the maximum number of users decreases to be equal to or smaller than the lower alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.2.2.2.0.54 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning
[OID] Indicates the MIB object ID of the alarm.
Spec of User Num: [INTEGER] Indicates the maximum number of MAC address migration users in quiet state.
Current Threshold:[INTEGER] Indicates the percentage of MAC address migration users in quiet state against the maximum number of users.
Lower Threshold:[INTEGER]% Indicates the lower alarm threshold for the percentage of MAC address migration users in quiet state against the maximum number of users.
Upper Threshold:[INTEGER]% Indicates the upper alarm threshold for the percentage of MAC address migration users in quiet state against the maximum number of users.

Impact on the System

The clear alarm generated when the percentage of MAC address migration users in quiet state reaches the upper threshold has no impart on the system.

Possible Causes

The percentage of current MAC address migration users in quiet state against the maximum number of users decreases to be equal to or smaller than the lower alarm threshold.

Procedure

  • This alarm message is informational only, and no action is required.

Related Information

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.53 hwMacMovedQuietMaxUserAlarm

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.106 hwNACUserClearAlarm

Description

AAA/4/NACUserClearAlarm: OID [OID] The NAC Max User Alarm is cleared.(Slot:[OCTET] User-num:[INTEGER] Threshold:[INTEGER]%)

The percentage of successfully authenticated NAC users reached or fell below the lower alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.106

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

Slot:[OCTET]

Indicates a slot ID. The value ALL indicates the device.

User-num:[INTEGER]

Indicates the number of successfully authenticated NAC users.

Threshold:[INTEGER]%

Indicates the percentage of successfully authenticated NAC users.

Impact on the System

This is the clear alarm for the alarm generated when the percentage of successfully authenticated NAC users reaches the upper alarm threshold.

Possible Causes

The percentage of successfully authenticated NAC users reached or fell below the lower alarm threshold.

Procedure

  • This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.107 hwNACMaxUserAlarm

Description

AAA/4/NACMaxUserAlarm: OID [OID] The number of NAC users reached the maximum.(Slot:[OCTET] User-num:[INTEGER] Threshold:[INTEGER]%)

The percentage of successfully authenticated NAC users reached the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.107

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

Slot:[OCTET]

Indicates a slot ID. The value ALL indicates the device.

User-num:[INTEGER]

Indicates the maximum number of authenticated NAC users allowed on the device.

Threshold:[INTEGER]%

Indicates the percentage of successfully authenticated NAC users.

Impact on the System

None

Possible Causes

The percentage of successfully authenticated NAC users reached the upper alarm threshold.

Procedure

  1. Run the display authentication user-alarm configuration command in any view to check the upper alarm threshold for the percentage of successfully authenticated NAC users. Adjust the threshold according to the network requirements. If the fault persists, go to 2.
  2. Collect log information and contact technical support.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.112 hwChangePasswordAlarm

Description

AAA/4/ChangePasswordAlarm: OID [OID] Local account password has been modified.(TYPE:[OCTET] User-name:[OCTET])

The password of a local user is changed.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.112

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

TYPE:[OCTET]

Where the password is changed.

User-name:[OCTET]

User name.

Impact on the System

None

Possible Causes

The user password is changed.

Procedure

  1. This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.116 hwPPPMaxUserAlarm

Description

AAA/4/PPPMaxUserAlarm: OID [OID] The number of PPP users reached the maximum.(Slot:[OCTET] User-num:[INTEGER] Threshold:[INTEGER]%)

The number of PPP users reached the maximum value.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.116

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

Slot:[OCTET]

Indicates a slot ID. The value ALL indicates the device.

User-num:[INTEGER]

Indicates the number of current PPP users.

Threshold:[INTEGER]%

Indicates the percentage of current PPP users to the total PPP users.

Impact on the System

None

Possible Causes

The percentage of current PPP users reached the upper alarm threshold.

Procedure

  1. Collect log information and contact technical support.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.117 hwPPPUserClearAlarm

Description

AAA/4/PPPUserClearAlarm: OID [OID] The PPP Max User Alarm is cleared.(Slot:[OCTET] User-num:[INTEGER] Threshold:[INTEGER]%)

The alarm indicating that the number of PPP users reached the maximum was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.117

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

Slot:[OCTET]

Indicates a slot ID. The value ALL indicates the device.

User-num:[INTEGER]

Indicates the number of current PPP users.

Threshold:[INTEGER]%

Indicates the percentage of current PPP users to the total PPP users.

Impact on the System

None

Possible Causes

The percentage of current PPP users fell equal to or below the lower alarm threshold.

Procedure

  1. This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.118 hwMacQuietMaxUserAlarm

Description

AAA/4/MACQUIETMaxUserAlarm: OID [OID] The number of mac quiet users reached the maximum.(Spec of User Num:[INTEGER1] Current Threshold:[INTEGER2] Lower Threshold:[INTEGER3]% Upper Threshold:[INTEGER4]%)

The number of MAC address authentication users in quiet state reached the maximum value.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.118

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

Spec of User Num:[INTEGER1]

Indicates the number of MAC address authentication users in quiet state.

Current Threshold:[INTEGER2]

Indicates the percentage of current MAC address authentication users in quiet state to the total MAC address authentication users in quiet state.

Lower Threshold:[INTEGER3]%

Indicates the lower alarm threshold for the percentage of MAC address authentication users in quiet state.

Upper Threshold:[INTEGER4]%

Indicates the upper alarm threshold for the percentage of MAC address authentication users in quiet state.

Impact on the System

None

Possible Causes

The percentage of current MAC address authentication users in quiet state to the total MAC address authentication users in quiet state exceeded the upper alarm threshold.

Procedure

  1. Collect log information and contact technical support.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.119 hwMacQuietUserClearAlarm

Description

AAA/4/MACQUIETUserClearAlarm: OID [OID] The MAC Quiet Max User Alarm is cleared.(Spec of User Num:[INTEGER1] Current Threshold:[INTEGER2] Lower Threshold:[INTEGER3]% Upper Threshold:[INTEGER4]%)

The alarm indicating that the number of MAC address authentication users in quiet state reached the maximum value is cleared.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.119

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

Spec of User Num:[INTEGER1]

Indicates the number of MAC address authentication users in quiet state.

Current Threshold:[INTEGER2]

Indicates the percentage of current MAC address authentication users in quiet state to the total MAC address authentication users in quiet state.

Lower Threshold:[INTEGER3]%

Indicates the lower alarm threshold for the percentage of MAC address authentication users in quiet state.

Upper Threshold:[INTEGER4]%

Indicates the upper alarm threshold for the percentage of MAC address authentication users in quiet state.

Impact on the System

None

Possible Causes

The percentage of current MAC address authentication users in quiet state to the total MAC address authentication users in quiet state fell equal to or below the lower alarm threshold.

Procedure

  1. This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.120 hwQuietUserClearAlarm

Description

AAA/4/QUIETUSERCLEARALARM: OID [OID] The quiet max user alarm is cleared.(UserType=[INTEGER], Threshold=[INTEGER]%, UserNum=[INTEGER], Lower Threshold=[INTEGER]%, Upper Threshold=[INTEGER]%)

The alarm indicating that the number of users in quiet state reached the maximum was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.120

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

UserType

Indicates the user access type: 802.1X or Portal.

Threshold

Indicates the percentage of current users in quiet state to the total users in quiet state.

UserNum

Indicates the number of users in quiet state.

Lower Threshold

Indicates the lower alarm threshold for the percentage of users in quiet state.

Upper Threshold

Indicates the upper alarm threshold for the percentage of users in quiet state.

Impact on the System

None

Possible Causes

The percentage of current users in quiet state fell equal to or below the lower alarm threshold.

Procedure

  1. This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.121 hwQuietUserMaxAlarm

Description

AAA/4/QUIETMAXUSERALARM: OID [OID] The number of quiet users is reaching the max.(UserType=[INTEGER], Threshold=[INTEGER]%, UserNum=[INTEGER], Lower Threshold=[INTEGER]%, Upper Threshold=[INTEGER]%)

The number of users in quiet state reached the maximum value.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.121

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

UserType

Indicates the user access type: 802.1X or Portal.

Threshold

Indicates the percentage of current users in quiet state to the total users in quiet state.

UserNum

Indicates the number of users in quiet state.

Lower Threshold

Indicates the lower alarm threshold for the percentage of users in quiet state.

Upper Threshold

Indicates the upper alarm threshold for the percentage of users in quiet state.

Impact on the System

None

Possible Causes

The number of users in quiet state reached the upper alarm threshold.

Procedure

  1. Check whether the number of users in quiet state exceeded the maximum value.

    • If so, check whether a large number of users who do not meet authentication requirements request authentication on the network. If such users exist, replan the network.
    • If not, no action is required.

  2. If the fault persists, contact technical support.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.122 hwQuietPortClearAlarm

Description

AAA/4/QUIETPORTCLEARALARM: OID [OID] The quiet max user alarm on port is cleared.(UserType=[INTEGER], IfName=[OCTET], Threshold=[INTEGER]%, UserNum=[INTEGER], Lower Threshold=[INTEGER]%, Upper Threshold=[INTEGER]%)

The alarm indicating that the number of users in quiet state on the interface reached the maximum was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.122

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

UserType

Indicates the user access type: MAC, 802.1X, or Portal.

IfName

Indicates the name of an interface.

Threshold

Indicates the percentage of current users in quiet state to the total users in quiet state.

UserNum

Indicates the number of users in quiet state.

Lower Threshold

Indicates the lower alarm threshold (85%) for the percentage of users in quiet state.

Upper Threshold

Indicates the upper alarm threshold (100%) for the percentage of users in quiet state.

Impact on the System

None

Possible Causes

The percentage of users in quiet state on the current interface fell equal to or below the lower alarm threshold.

Procedure

  1. This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.123 hwQuietPortMaxAlarm

Description

AAA/4/QUIETPORTMAXUSERALARM: OID [OID] The number of quiet users is reaching the max on port.(UserType=[INTEGER], IfName=[OCTET], Threshold=[INTEGER]%, UserNum=[INTEGER], Lower Threshold=[INTEGER]%, Upper Threshold=[INTEGER]%)

The number of users in quiet state on the interface reached the maximum value.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.123

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

UserType
Indicates the user access type:
  • 0: 802.1X
  • 1: MAC
  • 2: Portal

IfName

Indicates the name of an interface.

Threshold

Indicates the percentage of current users in quiet state to the total users in quiet state.

UserNum

Indicates the number of users in quiet state.

Lower Threshold

Indicates the lower alarm threshold for the percentage of users in quiet state.

Upper Threshold

Indicates the upper alarm threshold for the percentage of users in quiet state.

Impact on the System

None

Possible Causes

The number of users in quiet state on the interface reached the upper alarm threshold.

Procedure

  1. Check whether the number of users in quiet state exceeded the maximum value.

    • If so, check whether a large number of users who do not meet authentication requirements request authentication on the network. If such users exist, replan the network.
    • If not, no action is required.

  2. If the fault persists, contact technical support.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.124 hwMaxUclGroupIpNumAlarm

Description

AAA/4/UCLGROUPIPNUMALARM: OID [OID] The number of dynamic ucl group is reaching the max.(CurrentNum=[INTEGER], Threshold=[INTEGER]%)

The number of dynamic UCL groups reached the maximum value.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.124

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

CurrentNum

Indicates the number of IP addresses in a UCL group.

Threshold

Indicates the percentage of UCL groups in the specification.

Impact on the System

None

Possible Causes

The number of UCL groups reached the upper alarm threshold.

Procedure

  1. Run the display ucl-group all command to check whether the number of UCL groups exceeds the upper threshold.

    • If so, plan UCL groups properly.
    • If not, no action is required.

  2. If the fault persists, contact technical support.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.125 hwMaxUclGroupIpNumClearAlarm

Description

AAA/4/UCLGROUPIPNUMCLEARALARM: OID [OID] The max dynamic ucl group alarm is cleared.(CurrentNum=[INTEGER], Threshold=[INTEGER]%)

The alarm indicating that the number of dynamic UCL groups reached the maximum value was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.125

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

CurrentNum

Indicates the number of IP addresses in a UCL group.

Threshold

Indicates the percentage of UCL groups in the specification.

Impact on the System

None

Possible Causes

The percentage of current UCL groups fell equal to or below the lower alarm threshold.

Procedure

  1. This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.126 hwIPGroupChannelUp

Description

AAA/4/IPGROUPCHANNELUP:OID [OID] The state of ip group channel is up.(IPAddress=[OCTET], PortName=[INTEGER], PkiDomain=[OCTET])

IP-Group channel state is Up.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.126

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

IPAddress

Indicates the IP address of a controller.

PortName

Indicates the port number of a controller.

PkiDomain

Indicates the name of a PKI realm.

Impact on the System

None

Possible Causes

IP-Group channel state is Up.

Procedure

  1. This alarm is informational only, and no action is required.

AAA_1.3.6.1.4.1.2011.5.2.2.2.0.127 hwIPGroupChannelDown

Description

AAA/4/IPGROUPCHANNELDOWN: OID [OID] The state of ip group channel is down.(IPAddress=[OCTET], PortName=[INTEGER], PkiDomain=[OCTET])

IP-Group channel state is Down.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.2.2.2.0.127

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

IPAddress

Indicates the IP address of a controller.

PortName

Indicates the port number of a controller.

PkiDomain

Indicates the name of a PKI realm.

Impact on the System

None

Possible Causes

IP-Group channel state is Down.

Procedure

  1. Ensure that the IP-Group configuration is correct, for example, the IP address and port number of the controller are correct.
  2. If the fault persists, collect log information and contact technical support.
Translation
日本語 简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100127008

Views: 80640

Downloads: 335

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :