Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WEB_1.3.6.1.4.1.2011.5.4.2.2.1.3 hwPortalMaxUserAlarm
Description
WEB/4/PORTALMaxUserAlarm: OID [OID] The number of portal users reached the maximum.(Slot:[OCTET] User-num:[INTEGER] Threshold:[INTEGER]%)
The number of online Portal users exceeded the upper alarm threshold.
Parameters
| Name | Meaning |
|---|---|
OID |
Indicates the MIB object ID of the alarm. |
Slot |
The value is fixed as 255. |
User-num |
Indicates the maximum number of Portal authentication users allowed on the device. |
Threshold |
Indicates the upper alarm threshold on the percentage of online Portal authentication user count against the maximum number of Portal authentication users allowed on the device. |
Procedure
- Run the display this command in the system view
to check whether the upper alarm threshold configured by the portal
user-alarm percentage command is proper.
- If so, go to step 2.
- If not, modify the upper alarm threshold.
- Run the display portal command to check whether
the maximum number of Portal authentication users allowed on the device
is proper.
- If so, go to step 3.
- If not, run the portal max-user command to modify the maximum number of Portal authentication users.
- Run the display access-user command to check whether
online Portal authentication users are proper.
- If so, replace the device with a higher-performance device.
- If not, replan the network.
- Collect log and configuration information, and contact technical support personnel.