AM
AM_1.3.6.1.4.1.2011.6.8.2.2.0.6 hwUsedIPReachThreshold
Description
AM/4/IPPOOLUSEDOUT: OID [OID] The number of used addresses exceeds alarm threshold. (PoolName=[OCTET], Threshold=[OCTET])
The number of used addresses in the IP address pool exceeded the alarm threshold.
Parameters
| Name | Meaning |
|---|---|
OID |
Indicates the MIB object ID of the alarm. |
PoolName |
Address pool name. |
Threshold |
Percentage of the alarm indicating that the addresses in an address pool are used up. |
Possible Causes
The percentage of used addresses in the IP address pool exceeded the alert threshold.
Procedure
- Add more allocatable IP addresses to the address pool by reducing the mask length. Run the ip address ip-address { mask | mask-length } command in the interface view to reduce the mask length. Alternatively, run the network ip-address [ mask { mask | mask-length } ] command in the global address pool view to reduce the mask length.
- If an IP address segment is configured in the address pool, add more allocatable IP addresses to the address pool by increasing the range of the IP address segment. Run the dhcp server ip-range start-ip-address end-ip-address command in the interface view to increase the range of IP addresses. Alternatively, run the section section-id start-address [ end-address ] command in the global address pool view to increase the range of IP addresses.
AM_1.3.6.1.4.1.2011.6.8.2.2.0.7 hwUsedIPReachThresholdResume
Description
AM/4/IPPOOLUSEDOUTRESUME: OID [OID] The number of used addresses descends to alarm threshold. (PoolName=[OCTET], Threshold=[OCTET])
The number of used addresses in the IP address pool fell below the clear alarm threshold.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
1.3.6.1.4.1.2011.6.8.2.2.0.7 |
Warning |
Processing error alarm |
Parameters
| Name | Meaning |
|---|---|
OID |
Indicates the MIB object ID of the alarm. |
PoolName |
Address pool name. |
Threshold |
Percentage of the clear alarm. |