Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FTPS
FTPS_1.3.6.1.4.1.2011.5.25.166.2.1 hwFtpNumThreshold
Description
FTPS/4/FTPUSEREXCEED:OID [oid] The number of FTP users exceeded the upper threshold. (Upper threshold = [ULONG])
The number of FTP users exceeded the upper limit.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.166.2.1 | Warning | equipmentAlarm(5) |
Parameters
| Name | Meaning |
|---|---|
| oid | Indicates the MIB object ID of the alarm. |
| Upper threshold | Upper limit of the number of FTP users |
Possible Causes
The number of IPv4 or IPv6 FTP users exceeds the upper limit of the number of FTP users.
Procedure
- Run the display
ftp-users command to check whether the number of
login FTP users exceeds the upper threshold.
If the number of login FTP users exceeds the upper threshold, go to step 2.
If the number of login FTP users does not exceed the upper threshold, go to step 3.
- Reduce the number of login FTP users.
- End.
FTPS_1.3.6.1.4.1.2011.5.25.166.2.2 hwFtpNumThresholdResume
Description
FTPS/4/FTPUSERRESUME:OID [oid] The number of FTP users fell below the lower threshold. (Lower threshold = [ULONG])
The number of FTP users fell below the upper limit.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.166.2.2 | Warning | equipmentAlarm(5) |