Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DOT1X
DOT1X_1.3.6.1.4.1.2011.5.25.40.4.2.1 hwSrvcfgEapMaxUserAlarm
Description
DOT1X/4/8021XREACHMAXNUM:OID [OID] The number of users has reached the max number.(PortIndex=[INTEGER], PortName=[OCTET])
The number of 802.1X authentication users reaches the upper limit.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.40.4.2.1 | Warning | processingErrorAlarm(4) |
Parameters
| Name | Meaning |
|---|---|
| OID | Indicates the MIB object ID of the alarm. |
| PortIndex | Indicates the access interface index. |
| PortName | Indicates the access interface name. |
Procedure
- Run the display access-user interface interface-type
interface-number command to check whether online 802.1X authentication
users are proper.
- If so, replace the device with a higher-performance device.
- If not, replan the network.
- Collect log information and contact technical support personnel.
DOT1X_1.3.6.1.4.1.2011.5.25.171.2.1 hwMacAuthenMaxUserAlarm
Description
DOT1X/4/MACAREACHMAXNUM:OID [OID] The number of users has reached the max number.(PortIndex=[INTEGER], PortName=[OCTET])
The number of MAC address authentication users reaches the upper limit.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.171.2.1 | Warning | processingErrorAlarm(4) |
Parameters
| Name | Meaning |
|---|---|
| OID | Indicates the MIB object ID of the alarm. |
| PortIndex | Indicates the access interface index. |
| PortName | Indicates the access interface name. |
Procedure
- Run the display access-user interface interface-type
interface-number command to check whether online MAC address authentication
users are proper.
- If so, replace the device with a higher-performance device.
- If not, replan the network.
- Collect log information and contact technical support personnel.