No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
S1700, S2720, S5700, and S6700 V200R019C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SYSRES

SYSRES

SYSRES_1.3.6.1.4.1.2011.5.25.358.2.1 hwSysResourceExceed

Description

SYSRES/2/EXCEED: OID [oid] The whole device system resource was overloaded. (Service=[INTEGER], ResType=[INTEGER], ServiceIndex=[STRING], Descrption=[STRING])

The number of system resources exceed the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.358.2.1

Major

equipmentAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Service

Service whose resources exceeded the upper alarm threshold.

Currently, only OSPF supports this alarm.

ResType

Resource type

When the value of Service is 1:
  • The number of interfaces that are up in a single OSPF process exceeded the upper alarm threshold.

ServiceIndex

Service index

If both the service ID and resource type are 1, the service index indicates the OSPF process ID.

Description

Alarm description

Impact on the System

If both the service ID and resource type are 1, excess interfaces that are added to the OSPF process cannot establish OSPF neighbor relationships, which may lead to service interruptions.

Possible Causes

If both the service ID and resource type are 1, the number of interfaces that are Up in the OSPF single process exceeded the upper alarm threshold.

Procedure

  1. Both the service ID and resource type are 1.
    1. Run the display ospf [ process-id ] brief command in any view to check whether unneeded interfaces exist in the OSPF process.

      • If unneeded interfaces exist in the OSPF process, go to step b.
      • If unneeded interfaces do not exist in the OSPF process, go to step c.

    2. Delete unneeded interfaces from the OSPF process and then check whether the alarm is cleared.

      • If the alarm is cleared, go to step d.
      • If the alarm persists, go to step c.

    3. Collect alarm information and configuration information, and then contact technical support personnel.
    4. End.

SYSRES_1.3.6.1.4.1.2011.5.25.358.2.2 hwSysResourceExceedResume

Description

SYSRES/2/RESUMED: OID [oid] The whole device system resource overload was recovered. (Service=[INTEGER], ResType=[INTEGER], ServiceIndex=[STRING], Descrption=[STRING])

The number of system resources fell below the lower alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.358.2.2

Major

equipmentAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Service

Service whose resources fell below the lower alarm threshold.

Currently, only OSPF supports this alarm.

ResType

Resource type

If the service ID is 1:
  • The number of interfaces that are Up in the OSPF single process exceeds the upper alarm threshold.

ServiceIndex

Service index

If both the service ID and resource type are 1, the service index indicates the OSPF process ID.

Description

Alarm description

Impact on the System

The system will not be affected.

Possible Causes

If both the service ID and resource type are 1, the number of interfaces that are Up in the OSPF single process fell below the lower alarm threshold (90% of the upper alarm threshold).

Procedure

  1. This trap message is informational only, and no action is required.

SYSRES_1.3.6.1.4.1.2011.5.25.358.2.3 hwSysResourceThresholdExceed

Description

SYSRES/4/THRESHOLDEXCEED:OID [oid] The whole device system resource exceeded the threshold. (Service=[INTEGER], ResType=[INTEGER], ServiceIndex=[STRING], Description=[STRING])

The number of system resources on the entire device exceeded the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.358.2.3 Warning equipmentAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Service
Service ID
  • 1 OSPF

ResType

Resource type

If the service ID is 1:
  • The number of interfaces that are Up in the OSPF single process exceeds the upper alarm threshold.

ServiceIndex

Service index

If both the service ID and resource type are 1, the service index indicates the OSPF process ID.

Description

Alarm description

Impact on the System

If both the service ID and resource type are 1, excess interfaces that are added to the OSPF process cannot establish OSPF neighbor relationships, which may lead to service interruptions.

Possible Causes

If both the service ID and resource type are 1, the number of interfaces that are Up in the OSPF single process exceeded the upper alarm threshold.

Procedure

  1. Both the service ID and resource type are 1.
    1. Run the display ospf [ process-id ] brief command in any view to check whether unneeded interfaces exist in the OSPF process.

      • If unneeded interfaces exist in the OSPF process, go to step b.
      • If unneeded interfaces do not exist in the OSPF process, go to step c.

    2. Delete unneeded interfaces from the OSPF process and then check whether the alarm is cleared.

      • If the alarm is cleared, go to step d.
      • If the alarm persists, go to step c.

    3. Collect alarm information and configuration information, and then contact technical support personnel.
    4. End.

SYSRES_1.3.6.1.4.1.2011.5.25.358.2.4 hwSysResourceThresholdExceedResume

Description

SYSRES/4/THRESHOLDEXCEEDRESUME:OID [oid] The whole device system resource fell from the threshold. (Service=[INTEGER], ResType=[INTEGER], ServiceIndex=[STRING], Description=[STRING])

The number of system resources on the entire device fell below the lower alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.358.2.4

Warning

equipmentAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Service
Service ID
  • 1 OSPF

ResType

Resource type

If the service ID is 1:
  • The number of interfaces that are Up in the OSPF single process exceeds the upper alarm threshold.

ServiceIndex

Service index

If both the service ID and resource type are 1, the service index indicates the OSPF process ID.

Description

Alarm description

Impact on the System

The system will not be affected.

Possible Causes

If both the service ID and resource type are 1, the number of interfaces that are Up in the OSPF single process fell below the lower alarm threshold (90% of the upper alarm threshold).

Procedure

  1. This trap message is informational only, and no action is required.
Translation
日本語 简体中文
Download
Updated: 2022-05-25

Document ID: EDOC1100127008

Views: 80729

Downloads: 335

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :