Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CMD
CMD_1.3.6.1.4.1.2011.5.25.37.2.136 hwSuperChangeSuccesful
CMD_1.3.6.1.4.1.2011.5.25.37.2.137 hwSuperChangeFailure
Description
CMD/2/SUPERCHANGE_FAIL:OID [oid] Super change failure.
The current user failed to change the user level.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.37.2.137 | Major | environmentalAlarm(6) |
Procedure
- Determine whether the correct password used to change the
user level is obtained.
If the password is obtained, go to Step 3.
If the password is not obtained, go to Step 2.
- Run the super password command to configure a password for switching a user from a lower level to a higher level.
- Use the correct password to rechange the user level.
- End.