Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI_1.3.6.1.4.1.2011.6.122.34.0.2.9 hwPKICACertInvalid
Description
PKI/2/PKICACERTINVALID: OID [oid] the CA certificate is invalid. (CACertIssuer=[issuer], CACertSubject=[subject], CACertStartTime=[starttime], CACertFinishTime=[finishtime])
The CA certificate is invalid.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.122.34.0.2.9 | Major | communicationsAlarm |
Parameters
| Name | Meaning |
|---|---|
| oid | Indicates the MIB object ID of the alarm. |
| issuer | Indicates the issuer of the CA certificate. |
| subject | Indicates the subject of the CA certificate. |
| starttime | Indicates the start time of the CA certificate. |
| finishtime | Indicates the end time of the CA certificate. |
Procedure
- Run the display clock command to check whether the device time is correct.
If not, run the clock datetime command in the user view to change the device time.
- Apply for a new certificate through SCEP or CMPv2 online or apply for a new certificate offline. For details, see the S2720, S5700, and S6700 V200R019C10 Configuration Guide - PKI Configuration.