Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI_1.3.6.1.4.1.2011.6.122.34.0.2.22 hwPKIRsaHrpBackFail
Description
PKI/2/PKIBACKRSAHRPFAIL: OID [oid] Backing up RSA key pair backup to the standby device failed. (KeyName=[keyname], KeyBit=[keybit])
The new RSA key pair created on the active device during an automatic certificate update failed to be backed up to the standby device through the Huawei Redundancy Protocol (HRP).
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.122.34.0.2.22 | Major | communicationsAlarm |
Parameters
| Name | Meaning |
|---|---|
| oid | Indicates the MIB object ID of the alarm. |
| keyname | Indicates the name of the RSA key pair. |
| keybit | Indicates the bits of the RSA key pair. |
Impact on the System
In the dual-system hot backup deployment, if the RSA key pairs on the active and standby devices are not the same, anomalies might occur in certificate-related services during an active/standby switchover.