Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI_1.3.6.1.4.1.2011.6.122.34.0.2.6 hwPKIGetCertFailHttp
Description
PKI/4/PKIGETCERTFAILHTTP: OID [oid] get certificate unsuccessfully with HTTP. (CertUrl=[certurl], CertSaveName=[certsavename])
The system failed to obtain the certificate through HTTP.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.122.34.0.2.6 | Warning | communicationsAlarm |
Parameters
| Name | Meaning |
|---|---|
| oid | Indicates the MIB object ID of the alarm. |
| certurl | Indicates the URL for obtaining the certificate. |
| certsavename | Indicates the name of the saved certificate file. |
Possible Causes
- There is no reachable route between the device and HTTP server.
- The PKI configurations of the device and HTTP server are incorrect.
- The HTTP server is faulty.
Procedure
- Run the ping command to check whether there is a reachable route between the device and HTTP server.
If not, check the route and link to ensure that there is a reachable route between the device and HTTP server.
- Check whether the PKI configurations of the device and HTTP server are correct, including the certificate URL.
If not, ensure that the PKI configurations are correct.
- Check whether the HTTP server is working properly.
If not, ensure that the HTTP server is working properly.
- Collect alarm and configuration information, and contact technical support personnel.