Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Alarms
Context
After alarm messages are cleared, there is no way for the NMS to obtain any information about these cleared messages. Therefore, before deleting alarm messages, be sure that the NMS no longer needs these alarm messages.
In routine maintenance, you can run the following commands to clear alarm messages.
Procedure
- Clears hardware alarms.
Run clear record device-alarm [ all | slot slot-id ]
Hardware alarms are cleared.
- Clearing active alarms.
Run system-view
The system view is displayed.
Run alarm
The alarm view is displayed.
Run clear alarm active { all | sequence-number sequence-number }
Active alarms are cleared.