S6730-H and S6730S-H Service Port Stacking Support

Enterprise

Worldwide

- Türkçe

History
Popular search
Switches Routers Servers Storage Data Center Energy Cloud Computing
Quick access
Recommended

S6730-H and S6730S-H Service Port Stacking Support

For the cables that can be used as stack cables, see "Cables" in the Hardware Description. Using other cables may cause exceptions in the stack system, for example, frequent error-down events on stack ports.
Any models of the S6730-H series can set up a stack.
The number of stacked switches is recommended to be 2 to 9. In addition, when using iMaster NCE-Campus to manage and maintain a stack, ensure that the stack has no more than four member switches.
A switch supports a maximum of two logical stack ports.
For stacking-supported service ports, some of them can be used as stack ports, whereas some can be used as ordinary service ports.
Two types of ports on a switch can be both configured as stack ports, and each logical stack port can contain only one type of ports.

Table 3-36 Service port stacking support

Device Series	Port Supporting Stacking	Stack Cable	Rate of a Single Port	Maximum of Stack Member Ports in a Logical Stack Port
S6730-H24X6C, S6730-H48X6C, S6730S-H24X6C-A	10GE ports on the front panel	1 m, 3 m, and 5 m SFP+ passive high-speed copper cables 10 m SFP+ active high-speed copper cables 3 m and 10 m AOC cables 10GE SFP+ optical module and optical fiber 0.5 m and 1.5 m SFP+ dedicated stack cables Only the last 16 10GE ports on the front panel can be used to set up a stack using dedicated stack cables.	10 Gbit/s	8
	40GE ports on the front panel	1 m, 3 m, and 5 m QSFP+ passive high-speed copper cables QSFP+ optical module and optical fiber (QSFP-40G-SR-BD optical modules can be used for stack since V200R019C10SPC500.) 10 m QSFP+ AOC cable	40 Gbit/s	6
	100GE ports on the front panel	1 m QSFP28 high-speed copper cables 10 m QSFP28 AOC cables QSFP28 optical module and optical fiber	100 Gbit/s	6
S6730-H28Y4C	25GE ports on the front panel	1 m (passive) SFP28 cables 3 m, 5 m, 7 m, and 10 m SFP28 AOC cables SFP28 optical module and fiber	25 Gbit/s	8
S6730-H28Y4C	100GE ports on the front panel	1 m QSFP28 high-speed copper cables 10 m QSFP28 AOC cables QSFP28 optical module and optical fiber	100 Gbit/s	4
S6730-H24X4Y4C	10GE ports on the front panel	1 m, 3 m, and 5 m SFP+ passive high-speed copper cables 10 m SFP+ active high-speed copper cables 3 m and 10 m AOC cables 10GE SFP+ optical module and optical fiber 0.5 m and 1.5 m SFP+ dedicated stack cables Only the last 16 10GE ports on the front panel can be used to set up a stack using dedicated stack cables.	10 Gbit/s	8
	25GE ports on the front panel	1 m (passive) SFP28 cables 3 m, 5 m, 7 m, and 10 m SFP28 AOC cables SFP28 optical module and fiber	25 Gbit/s	8
	100GE ports on the front panel	1 m QSFP28 high-speed copper cables 10 m QSFP28 AOC cables QSFP28 optical module and optical fiber	100 Gbit/s	4

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Related Version

Related Documents

Digital Signature File