Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Statically Specifying the Interface Status of a Clock Device
Context
In a PTP clock synchronization network, all clock nodes work in the master-slave relationship. By default, the master-slave relationships between clock nodes are calculated through the BMC algorithm. To manually determine the master-slave relationship between clock nodes, specify the clock status of various interfaces excluding the TC interface.
Procedure
- Run system-view
The system view is displayed.
- Run ptp set-port-state enable slot slot-id
The function to statically specify the interface status is enabled.
- Run interface interface-type interface-number
The view of the interface whose status is to be statically configured is displayed.
- Run ptp port-state { slave | passive | master | premaster | listening | faulty | disabled | initializing }
The interface status is statically specified.