Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Device to Output Logs to the Log Buffer
Procedure
- Run system-view
The system view is displayed.
- Run info-center logbuffer
The device is enabled to output information to the log buffer.
By default, the device is enabled to output logs to the log buffer.
- Run info-center logbuffer channel { channel-number | channel-name }
The channel used by the device to output logs to the log buffer is specified.
By default, the device uses channel 4 to output logs to the log buffer.
- Run info-center source { module-name | default } channel { channel-number | channel-name } log { state { off | on } | level severity } *
A rule for outputting logs to a channel is set.
By default, channel 4 is enabled to output logs and the lowest log severity is warning.
- (Optional) Run info-center logbuffer size logbuffer-size
The maximum number of logs in the log buffer is set.
By default, a log buffer can store a maximum of 512 logs.