Configuring the Device to Output Debugging Messages to the Console
Context
After debugging messages are output to the console, you can view debugging messages on the console (host from which you can log in to the device through the console interface) to monitor device running.
Procedure
- Run system-view
The system view is displayed.
- Run info-center console channel { channel-number | channel-name }
A channel used by the device to output debugging messages to the console is specified.
By default, the device uses channel 0 to output debugging messages to the console.
- Run info-center source { module-name | default } channel { channel-number | channel-name } debug { state { off | on } | level severity } *
A rule for outputting debugging messages to a channel is set.
By default, channel 0 is enabled to output debugging messages and the lowest severity is debugging.
- Run quit
Return to the user view.
- Run terminal monitor
Display of logs, traps, and debugging message output is enabled on the user terminal.
By default, console display is enabled and terminal display is disabled.
- Run terminal debugging
Debugging message display is enabled on the user terminal.
By default, debugging message display is disabled on the user terminal.