Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Client Clock
Procedure
- Run system-view
The system view is displayed.
- Run ntp-service { max-sys-poll max-sys-poll-value | spike-offset spike-offset-value | sync-interval interval } *
The following are configured:
- The maximum polling interval. The default interval is 217s.
- The timestamp difference between packets sent by the clock server and received by the client. The default difference is 128 ms.
- The interval at which synchronization of the client clock occurs. The default interval is 600 seconds.
Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support max-sys-poll max-sys-poll-value and spike-offset spike-offset-value parameters.
- Run ntp-service max-distance max-distance-value
The maximum NTP synchronization distance is configured.
By default, The maximum NTP synchronization distance is 1 second.
