Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Logical Interfaces
Involved Network Element
Other network elements are not required.
Licensing Requirements
A logical interface is a basic feature of a switch and is not under license control.
Feature Support in V200R019C10
All models of S2720, S5700, and S6700 series switches support logical interfaces.
Feature Limitations
- For Layer 2 interfaces, only hybrid and trunk interfaces support Ethernet sub-interface configuration. After a Layer 2 interface is switched to a Layer 3 interface using the undo portswitch command, the interface supports Layer 3 Ethernet sub-interface configuration.
- After an interface is added to an Eth-Trunk, you can only configure sub-interfaces on the Eth-Trunk, but not on the interface.
