Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Mappings Between Local Priorities and Queues
Context
The switch sends packets to the specified queue based on the mappings between local priorities and queues.
The S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S do not support the mapping configuration between local precedences and queues cannot be configured.
Procedure
- Run system-view
The system view is displayed.
- Run qos local-precedence-queue-map local-precedence queue-index
The mapping between local priorities and queues is configured.
The mappings between local priorities and queues take effect only on the inbound interface. That is, traffic enters queues based on the mappings.