Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for HQoS
Involved Network Elements
Other network elements are not required.
Licensing Requirements
HQoS is a basic feature of a switch and is not under license control.
Feature Support in V200R019C10
Only the following switch model supports HQoS:
S5720-HI, S5731-S, S5731S-S, S5731-H, S5731S-H
For details about software mappings, visit Hardware Query Tool and search for the desired product model.
Feature Limitations
- Table 11-1 describes the specifications of HQoS.
Table 11-1 Specifications of HQoS
Item
Specifications
Maximum number of flow queues
65528
Maximum number of subscriber queues
Versions earlier than V200R011C10: 8191
V200R011C10 and later versions: 8190
Maximum number of flow queues for which traffic statistics can be collected
16376
Maximum number of port queues
8
Maximum number of flow queue WRED drop profiles
128
Maximum number of flow queue profiles
128
Maximum number of flow mapping profiles
8
- The device supports only HQoS in the outbound direction.
- When each service flow of different users has the same priority, the device cannot provide congestion management for service flows based on users.
- If Eth-Trunk member interfaces are located on both HQoS-capable and HQoS-incapable cards, HQoS with authentication and authorization of wired and wireless users cannot be configured. This is because traffic may be forwarded through an HQoS-incapable card, and HQoS becomes unavailable.
