Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Power Consumption Information
Context
You can view power consumption data on both clients and the Commander to obtain power consumption information on the entire network.
Procedure
- Run the display easy-operation power [ client client-id | commander ] command to check power consumption information about the Commander and clients.The parameters specified in commands used to check power consumption information differ between the Commander and clients:
On the Commander
- If no parameter is specified, you can check power consumption information about the Commander and all the clients in initial, upgrade, and normal operating states.
- If client client-id is specified, you can check power consumption information about the specified client.
- If commander is specified, you can check power consumption information about the Commander.
On the client
The parameters client client-id and commander are not supported. You can only check power consumption information about the current client.