BootLoad Diagnostic Menu Overview
In the BootLoad main menu, press Ctrl+E to enter the diagnostic menu.
The diagnostic menu is used to commission device performance during the device production and assembly processes. You are advised not to use the diagnostic menu. If required, follow the instructions of the technical support personnel.
The default username and password are available in S Series Switches Default Usernames and Passwords (Enterprise Network or Carrier). If you have not obtained the access permission of the document, see Help on the website to find out how to obtain it.
Method of entering the diagnostic menu
Press Ctrl+B or Ctrl+E to enter BootLoad menu ... 3
password: //Enter the BootLoad password.
BootLoad Menu
1. Boot with default mode
2. Enter startup submenu
3. Enter ethernet submenu
4. Enter filesystem submenu
5. Enter password submenu
6. Clear password for console user
7. Reboot
(Press Ctrl+E to enter diag menu)//Press Ctrl+E to enter the diagnostic menu.
Enter your choice(1-7):
******************************************************************
* You have entered Engineering Mode. In this mode, any operation *
* may cause irreversible damage to the device. Please note! *
******************************************************************
DIAG MENU
1. Equip test
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Reserved
7. Aging test
8. E-Label barcode and MAC test
9. Reserved
10. Reserved
11. Image test
12. Return to main menu
Enter your choice(1-12):
The default username and password are available in S Series Switches Default Usernames and Passwords (Enterprise Network or Carrier). If you have not obtained the access permission of the document, see Help on the website to find out how to obtain it.
Item |
Description |
|---|---|
Equip test |
Enter the equipment test submenu. You can set the equipment software flag bit in this menu to facilitate equipment software startup and device commissioning. |
Reserved |
Reserved item. |
Aging test |
Enter the aging test submenu. This menu is used to test whether the read-write function of protocol stacks from the storage device, memory, and CPU is normal. |
E-Label barcode and MAC test |
Enter the e-label and MAC test submenu. You can view the device's e-label, PCB version, and subcard type in this menu. |
Image test |
Enter the image test submenu. |
Return to main menu |
Return to the BootLoad main menu. |
Equipment Test Submenu
DIAG MENU
1. Equip test
2. E-Label barcode and MAC test
3. Return to main menu
Enter your choice(1-3): 1
EQUIP TEST SUBMENU
1. Load DFX package
2. Return to upper menu
Enter your choice(1-2):
DIAG MENU
1. Equip test
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Reserved
7. Aging test
8. E-Label barcode and MAC test
9. Reserved
10. Reserved
11. Image test
12. Return to main menu
Enter your choice(1-12): 1
EQUIP TEST SUBMENU
1. Load DFX package
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Reserved
7. Reserved
8. Reserved
9. Reserved
10. Return to upper menu
Enter your choice(1-10):
Item |
Description |
|---|---|
Load DFX package |
Start the equipment package. |
Reserved |
Reserved item. |
Return to upper menu |
Return to the upper-level menu. |
Aging Test Submenu
DIAG MENU
1. Equip test
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Reserved
7. Aging test
8. E-Label barcode and MAC test
9. Reserved
10. Reserved
11. Image test
12. Return to main menu
Enter your choice(1-12): 7
AGING TEST Submenu
1. Set aging flag
2. Get aging flag
3. Clear aging flag
4. Display aging result
5. Return to upper menu
Enter your choice(1-5):
Item |
Description |
|---|---|
Set aging flag |
Set the aging test flag. |
Get aging flag |
Obtain the aging test flag. |
Clear aging flag |
Delete the aging test flag. |
Display aging result |
Display the aging test result. |
Return to upper menu |
Return to the upper-level menu. |
E-Label and MAC Test Submenu
Select 8 in the diagnostic menu to enter the e-label and MAC test submenu.
DIAG MENU
1. Equip test
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Reserved
7. Aging test
8. E-Label barcode and MAC test
9. Reserved
10. Reserved
11. Image test
12. Return to main menu
Enter your choice(1-12): 8
E-LABEL and MAC TEST Submenu
1. Read E-lable test
2. Reserved
3. Reserved
4. Read MAC address
5. Reserved
6. Read ict barcode
7. Reserved
8. Reserved
9. Reserved
10. Reserved
11. Return to upper menu
Enter your choice(1-11):
Item |
Description |
|---|---|
Read E-lable test |
Display the device's e-label. The e-label of various components including the main board, POE DIMM, fan, and power module can be displayed. |
Reserved |
Reserved item. |
Read MAC address |
Display the device's MAC address. |
Read ict barcode |
Display the device's barcode. |
Return to upper menu |
Return to the upper-level menu. |
Image Test Submenu
Select 11 in the diagnostic menu to enter the image test submenu.
DIAG MENU
1. Equip test
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Reserved
7. Aging test
8. E-Label barcode and MAC test
9. Reserved
10. Reserved
11. Image test
12. Return to main menu
Enter your choice(1-12): 11
IMAGE TEST SUBMENU
1. Reserved
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Return to upper menu
Enter your choice(1-6):
Item |
Description |
|---|---|
Reserved |
Reserved item. |
Return to upper menu |
Return to the upper-level menu. |