Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
File Upload Failure
Possible Causes
- The source or destination directory contains characters not supported by the device, such as spaces.
- The server root directory does not have sufficient storage space.
- The MTU on the server or client is modified. The size of data frames sent by the server or client exceeds the maximum value of the peer device or a device on the transmission path. As a result, the data frames are discarded.
Procedure
- Check whether the source or destination directory contains characters not supported by the device, such as spaces.
The directory name cannot contain spaces and the following special characters: ~ * / \ : ' ".
If the directory contains any of these characters, modify the directory.
- Check whether the storage space of the server root directory is sufficient.
Run the dir command on the server to check the available space of the server root directory.
If the storage space is insufficient, run the delete /unreserved command in the user view to delete outdated files.