Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Interfaces to VLANs
Context
After a multicast VLAN and a user VLAN are configured, you can add the network-side interface to the multicast VLAN and user-side interfaces to the user VLAN.
Procedure
- Run system-view
The system view is displayed.
- Add the network-side interface to the multicast VLAN. For details, see Configuring Interface-based VLAN Assignment (Statically Configured Interface Type) in "VLAN Configuration" in the S600-E V200R019C10 Configuration Guide - Ethernet Switching.
- Add user-side interfaces to the user VLAN. For details, see Configuring Interface-based VLAN Assignment (Statically Configured Interface Type) in "VLAN Configuration" in the S600-E V200R019C10 Configuration Guide - Ethernet Switching.
