Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the IGMP Snooping Running Status
Context
To check the IGMP snooping running status during routine maintenance, run the following display commands in any view.
Procedure
- Run the display igmp-snooping [ vlan [ vlan-id ] ] command to check all IGMP snooping running parameters in a VLAN.
- Run the display igmp-snooping [ vlan [ vlan-id ] ] configuration command to check the IGMP snooping configuration in a VLAN.
- Run the display igmp-snooping port-info [ vlan vlan-id [ group-address group-address ] ] [ verbose ] command to check information about member ports.
- Run the display igmp-snooping router-port vlan [ vlan-id ] command to check information about router ports.
- Run the display igmp-snooping querier vlan [ vlan-id ] command to check information about the IGMP snooping querier.
- Run the display igmp-snooping statistics vlan [ vlan-id ] command to check IGMP snooping statistics.
- Run the display l2-multicast forwarding-mode vlan [ vlan-id ] command to check the Layer 2 multicast forwarding mode.
- Run the display l2-multicast forwarding-table vlan [ vlan-id ] [ [ source-address source-address ] group-address { group-address | router-group } ] command to check the Layer 2 multicast forwarding table in a VLAN.
