Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic MLD Snooping Configuration
Context
After the configurations are complete, run the following commands in any view to check MLD snooping configurations, member ports, and router ports.
Procedure
- Run the display mld-snooping [ vlan vlan-id ] configuration command to check MLD snooping configuration.
- Run the display mld-snooping [ vlan vlan-id ] command to check running parameters of MLD snooping.
- Run the display mld-snooping port-info [ vlan vlan-id [ group-address ipv6-group-address ] ] [ verbose ] command to check member ports of a multicast group.
- Run the display mld-snooping router-port [ vlan vlan-id ] command to check router ports.
- Run the display mld-snooping forwarding-table vlan [ vlan-id ] [ [ source-address source-ipv6-address ] group-address { group-ipv6-address | router-group } ] command to check the multicast forwarding table in a VLAN.
- Run the display l2-multicast forwarding-mode vlan [ vlan-id ] command to check multicast data forwarding mode in the VLAN.
