Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
- About This Document
Overview of Reliability- DLDP Configuration
- Overview of DLDP
- Understanding DLDP
- Summary of DLDP Configuration Tasks
- Licensing Requirements and Limitations for DLDP
- Default Settings for DLDP
- Configure DLDP Functions
- Enabling DLDP
- (Optional) Configuring the Working Mode of DLDP
- (Optional) Configuring the DLDP-Compatible Mode
- (Optional) Setting the Interval for Sending Advertisement Packets
- (Optional) Setting the Timeout Period of the DelayDown Timer
- (Optional) Setting the Mode of Shutting Down an Interface When a Unidirectional Link Is Detected
- (Optional) Configuring the Authentication Mode for DLDP Packets
- Verifying the DLDP Configuration
- Resetting the DLDP Status
- Maintaining DLDP
- Configuration Examples for DLDP
- Troubleshooting DLDP
- Smart Link and Monitor Link Configuration
- Overview of Smart Link and Monitor Link
- Understanding Smart Link
- Understanding Monitor Link
- Applicable Scenarios for Smart Link and Monitor Link
- Summary of Smart Link and Monitor Link Configuration Tasks
- Licensing Requirements and Limitations for Smart Link and Monitor Link
- Default Settings for Smart Link and Monitor Link
- Configuring Basic Functions of Smart Link
- Configuring Load Balancing in a Smart Link Group
- Configuring the Uplink and Downlink Interfaces in a Monitor Link Group
- Maintaining Smart Link and Monitor Link
- Configuration Examples for Smart Link and Monitor Link
- Troubleshooting Smart Link and Monitor Link
- MAC Swap Loopback Configuration
- Overview of MAC Swap Loopback
- MAC Swap Loopback Features Supported by the Switch
- Summary of MAC Swap Loopback Configuration Tasks
- Licensing Requirements and Limitations for MAC Swap Loopback
- Configuring Local MAC Swap Loopback
- Configuring Remote MAC Swap Loopback
- Configuration Examples for MAC Swap Loopback
- EFM Configuration
- Overview of EFM
- Understanding EFM
- Summary of EFM Configuration Tasks
- Licensing Requirements and Limitations for EFM
- Default Settings for EFM
- Configuring Basic EFM Functions
- Configuring EFM Link Monitoring
- Configuring Remote Loopback
- Configuring Remote Fault Indication
- Configuring EFM Association
- Configuration Examples for EFM
- CFM Configuration
- Overview of CFM
- Understanding CFM
- Summary of CFM Configuration Tasks
- Licensing Requirements and Limitations for CFM
- Default Settings for CFM
- Configuring Basic Ethernet CFM Functions
- Configuring Loopback
- Configuring Linktrace
- Setting CFM Parameters
- Configuring CFM Association
- Monitoring the Running Status of Ethernet CFM
- Configuration Examples for CFM
- Troubleshooting CFM
- Y.1731 Configuration