HUAWEI-STACK-MIB

1.3.6.1.4.1.2011.5.25.183.1.1

hwStackRun

EnabledStatus

read-write

This object indicates whether the stacking function is enabled.

• 1: enable
• 2: disable

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.2

hwStackTopoType

INTEGER

Read-only

This object indicates the topology type.

• 1: ring(1)
• 2: link(2)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.3

hwStackMacAddressSwitchTime

Integer32

Read-write

This object indicates the MAC address switchover time of a stack system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.4

hwStackSystemMac

MacAddress

Read-only

This object indicates the MAC address of a stack system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.5

hwStackIsStackDevice

INTEGER

Read-only

This object indicates whether a device is in a stack system. A stack system consists of two or more devices.

• 1: true
• 2: false

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.6

hwStackReservedVlanId

Integer32

Read-write

This object indicates the reserved VLAN ID of a stack system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.11

hwStackMemberSpec

Integer32

accessible-for-notify

This object indicates the maximum number of member switches in a stack.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.32.17

hwStackVlanConflictDescription

OctetString

Indicates the services or protocols that conflict with the stack reserved VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.32.18

hwStackVlanID

Integer32

accessible-for-notify

Indicates the stack reserved VLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.20.1.1

hwMemberCurrentStackId

Integer32

Accessible-for-notify

This object indicates the stack ID of a stack member.

The value ranges from 0 to 8.

1.3.6.1.4.1.2011.5.25.183.1.20.1.2

hwMemberStackPriority

Integer32

read-write

This object identifies the priority of a stack member.

The value ranges from 1 to 255.

By default, the value is 100.

1.3.6.1.4.1.2011.5.25.183.1.20.1.3

hwMemberStackRole

INTEGER

read-only

This object identifies the role of a stack member.

1.3.6.1.4.1.2011.5.25.183.1.20.1.4

hwMemberStackMacAddress

OCTET STRING

read-only

This object identifies the MAC address of a device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.20.1.5

hwMemberStackDeviceType

OCTET STRING

read-only

This object indicates the device type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.20.1.6

hwMemberConfigStackId

Integer32

read-write

This object identifies the newly-configured ID of a device.

The value ranges from 0 to 8.

1.3.6.1.4.1.2011.5.25.183.1.20.1.7

hwMemberStackObjectId

OBJECT IDENTIFIER

read-only

This object indicates the SYSOID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.21.1.1

hwStackPortStackId

Integer32

accessible-for-notify

This object identifies the stack ID of a CSS member.

The value ranges from 0 to 8.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.21.1.2

hwStackPortId

Integer32

Accessible-for-notify

This object identifies the ID of a stack interface.

The value ranges from 0 to 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.21.1.3

hwStackPortName

OCTET STRING

read-only

This object identifies the name of a stack interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.21.1.4

hwStackNeighborInfo

OCTET STRING

read-only

This object indicates neighbor information. Neighbor information refers to the stack ID.

None indicates that there is no neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.21.1.5

hwStackPortStatus

INTEGER

read-only

This object identifies the status of a stack interface.

The value ranges from 1 to 2.

• 1: UP
• 2: Down

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.1

hwStackUpgradeIndex

Integer32

not-accessible

This object indicates the index of the upgrade operation.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.2

hwStackUpgradeGrpType

INTEGER

read- create

This object identifies the upgrade mode of the stack.

Currently, the value can only be allMembers(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.3

hwStackUpgradeGrpValue

OCTET STRING

read- create

This object identifies the ID of a member switch to be upgraded. The value is described in the following format: ID0 ID1 ID2 ....

Note: Two IDs are separated by a space. Only the IDs of the member switches to be upgraded are listed.

If the mode is set to allMembers, this object is invalid.

If the mode is set to memberIdList, the length of this value is 18 bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.4

hwStackUpgradeFileType

INTEGER

read- create

This object identifies the type of the file to be upgraded.

The values are startupFile(1) and patchFile(2).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.5

hwStackUpgradeFileInfo

OCTET STRING

read-create

This object indicates the type of the device to be upgraded and the corresponding upgrade file.

In a stack consisting of different types of devices, the device type and file path are in the format <SYSOID|PATH><SYSOID|PATH>.

If a stack consists of the devices of the same type, the device type and file path are in the format <SYSOID|PATH>.

The length is 1 to 255 bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.6

hwStackUpgradeFtpIp

IpAddress

read-create

This object indicates the IP address of the server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.7

hwStackUpgradeFtpUserName

OCTET STRING

read-create

This object indicates the user name required when a member switch obtains the FTP file.

The value is SIZE(1..32).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.8

hwStackUpgradeFtpPassword

OCTET STRING

read-create

This object indicates the password required when a member switch obtains the FTP file.

The value is SIZE(1..32).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.9

hwStackUpgradeServerPort

Integer32

read-create

This object indicates the port number of the upgrade server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.10

hwStackUpgradeFileSize

Integer32

read-create

This object identifies the maximum size of a file to be uploaded. The value is expressed in bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.11

hwStackUpgradeTransmitProtocol

INTEGER

read-create

This object identifies the type of the file transfer protocol.

The values are:

• ftp(1)
• sftp(2)
• tftp(3)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.30.1.51

hwStackUpgradeRowStatus

RowStatus

read-create

This object indicates the status of the operation row. It is the status of the operation row in the upgrade table. The row status can only be configured to CreateAndGo or destroy.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.31.1.1

hwStackUpgradeResultIndex

Integer32

not-accessible

This object indicates the index of the upgrade operation.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.31.1.2

hwStackUpgradeResultMemberId

Integer32

read-only

This object identifies the ID of a member switch.

The value ranges from 1 to 8.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.31.1.3

hwStackUpgradeResult

INTEGER

read-only

This object identifies the result of upgrading a member switch.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.31.1.4

HwStackUpgradeResultInProcess

Integer32

read-only

This object identifies the progress of upgrading a member switch. This value is 0 or 100 and valid only when the value of hwStackUpgradeResult[3] is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.31.1.5

hwStackUpgradeResultFailReason

INTEGER

read-only

This object identifies the error code of upgrading a member switch. This value is valid when the value of hwStackUpgradeResult[3] is 2.

When the value of hwStackUpgradeResult[3] is 1, 3, or 4, this value is opUpgradeInvalidValue(15), indicating a non-upgrade-failure process without an upgrade failure error code.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.23.1.1

hwEnableStackMode

Integer32

read-write

This object is read-only.

1.3.6.1.4.1.2011.5.25.183.1.22.1

hwStackLinkUp

• hwStackPortStackId
• hwStackPortId
• hwStackPortStatus

This object indicates that stack ports are Up.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.2

hwStackLinkDown

• hwStackPortStackId
• hwStackPortId
• hwStackPortStatus

This object indicates that stack ports are Down.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.3

hwStackStandbyChange

This object indicates the standby switch.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.4

hwStackSwitchOver

This object indicates the active/standby switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.5

hwStackSystemRestart

hwMemberCurrentStackId

This object indicates that a stack has restarted, and the original master switch is no longer the master after master preemption.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.6

hwStackStackMemberAdd

hwMemberCurrentStackId

This object indicates that a member switch is added to a stack system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.7

hwStackStackMemberLeave

hwMemberCurrentStackId

This object indicates that a member switch is removed from a stack system.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.8

hwStackStackMacChange

hwMemberStackMacAddress

This object indicates that the MAC address of a stack system is changed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.9

hwStackLogicStackPortLinkErr

This object indicates that logical ports of a stack system are connected incorrectly.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.10

hwStackPhyStackPortLinkErr

This object indicates that physical ports of a stack system are connected incorrectly.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.11

hwPhyStackPortIsDown

hwStackLocalIfName

This object indicates that physical ports of a stack system are Down.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.12

hwPhyStackPortIsUp

hwStackLocalIfName

This object indicates that physical ports of a stack system are Up.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.14

hwStackPortConfigureFailed

This object indicates that the stack interface is incorrectly configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.32

hwStackMemberExceedSpec

hwStackMemberSpec

The number of member switches in a stack exceeds the maximum value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.49

hwPhyStackVlanConflict

• hwStackVlanConflictDescription
• hwStackVlanID

The service VLAN conflicts with the stack reserved VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.59

hwStackPortErrorDown

• hwStackLocalIfName
• hwStackPortErrorDownType

An error-down event occurred on a stack port.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.60

hwStackPortErrorDownRecovery

• hwStackLocalIfName
• hwStackPortErrorDownType

The stack port recovered from the error-down state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.61

hwStackSetUpFailure

• hwStackLocalSlotID
• hwStackPeerSlotID
• hwStackSetUpFailureDescription

This object indicates that a stack fails to be set up.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.64

hwStackAutoConfigFailed

• hwStackAutoConfigFailedSlotID
• hwStackAutoConfigFailedIfName
• hwStackAutoConfigFailedReason

After a dedicated stack cable is connected to a port, this port does not automatically become a stack port.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.183.1.22.65

hwStackPortLinkErr

• hwStackLocalIfName
• hwStackPeerIfName
• hwStackConnectErrReason

Service ports are incorrectly connected with stack cables.

This object is implemented as defined in the corresponding MIB file.