HUAWEI-L2VLAN-MIB

1.3.6.1.4.1.2011.5.25.42.3.1.5.1

hwVcmpDeviceMac

OCTET STRING{(6,6)}

read-write

MAC address of a device running VCMP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.2.38

hwL2VlanVoiceVlan8021p

Integer(0..7)

Read-write

This object indicates the 802.1p priority of the Voice VLAN.

The default value is 6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.39

hwL2VlanVoiceVlanDscp

Integer(0..63)

Read-write

This object indicates DSCP priority of the Voice VLAN.

The default value is 46.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.1

hwL2VlanIndex

VlanId

Not-accessible

The value of this object identifies the VLAN index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.2

hwL2VlanDescr

OCTET STRING(SIZE(0 to 80))

Read-create

This object indicates the description information of the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.3

hwL2VlanPortList

PortList

Read-create

This object indicates the list of ports added to the VLAN.

A switch interface joins VLANs 1 to 4094 by default.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.4

hwL2VlanType

INTEGER

{

super vlan(1),

common-vlan(2),

sub-vlan(3),

muxVlan(4),

muxSubVlan(5),

protocolTransVlan(6)

}

Read-create

The value of this object identifies the type of the VLAN.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.6

hwL2VlanIfIndex

Integer32

Read-only

This object indicates whether the VLAN is configured with VLANIF. If VLANIF is configured, the value of this object is the index of VLANIF. Otherwise, the value is -1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.7

hwL2VlanMacLearn

EnabledStatus

Read-create

The value of this object identifies whether the function of learning the MAC address is enabled. Super VLANs do not have this attribute.

The default value is enabled(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.11

hwL2VlanCreateStatus

INTEGER

{

other(1),

static(2),

dynamic(3)

}

Read-only

The value of this object identifies the creation mode of the VLAN:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.12

hwL2VlanRowStatus

RowStatus

Read-create

The value of this object identifies the statuses of rows recorded by the VLAN:

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.15

hwL2VlanProperty

INTEGER

{

default(1),

backboneVlan(2),

mutilcastVlan(3),

userVlan(4)

}

Read-only

The Property of Vlan: backboneVlan(2) used by PBT application, mutilcastVlan(3) used by Multicast Vlan, userVlan(4) used by the users VLAN, and Default(1) means no special apply.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.17

hwL2VlanName

OCTET STRING(SIZE(0..31))

Read-create

The value of this object indicates the name of VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.18

hwL2VlanSmartMacLearn

EnabledStatus

Read-create

After the flexible MAC address learning in a VLAN is enabled, if fewer than three interfaces in the VLAN are Up, the system automatically disables MAC address learning in the VLAN, avoiding unnecessary resource consumption due to MAC address learning.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.20

hwL2VlanManagementVlan

EnabledStatus

Read-create

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.21

hwL2VlanDynamicVlan

EnabledStatus

read-only

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.1

hwL2UntagAddDTagPortIndex

Integer

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.2

hwL2UntagAddDTagOuterVlanId

VlanId

Read-create

This object indicates the outer VLAN tag added to an untagged packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.3

hwL2UntagAddDTagInnerVlanId

VlanId

Read-create

This object indicates the inner VLAN tag added to an untagged packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.4

hwL2UntagAddDTagRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1

hwL2VlanIpSubnetVlanVlanId

VlanId

Not-accessible

This object specifies the VLAN ID.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2

hwL2VlanIpSubnetVlanIpSubnetIndex

Integer(1..12)

Not-accessible

This object indicates the index of the IP subnet.

The value ranges from 1 to 12.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3

hwL2VlanIpSubnetVlanIpAddress

IpAddress

Read-create

This object specifies the source IP address or source network address that is the basis of the subnet-based VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4

hwL2VlanIpSubnetVlanIpSubnetMask

IpAddress

Read-create

This object indicates the subnet mask.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5

hwL2VlanIpSubnetVlanPriority

Integer(0..7)

Read-create

This object specifies the 802.1p priority of the VLAN corresponding to the specified IP address or network segment.

The value ranges from 0 to 7.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6

hwL2VlanIpSubnetVlanRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.1

hwL2VlanMacVlanNewMac

MacAddress

Not-accessible

This object indicates the MAC address that is the basis of dividing VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.2

hwL2VlanMacVlanNewVlanId

VlanId

Read-create

This object specifies the VLAN ID.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.3

Integer32(0..7)

Read-create

This object identifies the 802.1p priority of the VLAN matching the MAC address.

The value ranges from 0 to 7.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.4

hwL2VlanMacVlanNewMacRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1

hwL2VlanProtocolVlanNewVlanId

VlanId

Not-accessible

This object specifies the VLAN ID set in the system view.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2

hwL2VlanProtocolVlanNewProtocolIndex

Integer32(0..15)

Not-accessible

This object identifies the index of the protocol-based VLAN.

The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3

hwL2VlanProtocolVlanNewProtocolType

INTEGER

{

at(1),

ipv4(2),

ipv6(3),

ipxEthernetii(4),

ipxLlc(5),

ipxRaw(6),

ipxSnap(7),

modeEthernetii(8),

modeLlc(9),

modeSnap(10)

}

Read-create

This object indicates the protocol type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4

hwL2VlanProtocolVlanNewProtocolTypeValue

OCTET STRING (SIZE(2))

Read-create

The value of the configured protocol type.

The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows.

• ProtocolType: ipv4
  • ProtocolSubType: notused
  • ProtocolTypeValue: Zero length string
• ProtocolType: ipv6
  • ProtocolSubType: notused
  • ProtocolTypeValue: Zero length string
• ProtocolType: at
  • ProtocolSubType: notused
  • ProtocolTypeValue: Zero length string
• ProtocolType: ipx
  • ProtocolSubType:
    • ethernetii
    • llc
    • raw
    • snap
  • ProtocolTypeValue: Zero length string
• ProtocolType: mode-ethernetii
  • ProtocolSubType: etype
  • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].
• ProtocolType: mode-llc
  • ProtocolSubType: etype
  • ProtocolTypeValue: the sequence of different parts is as follows: [dsap value;ssap value]. Both range is [0x00..0xff]. For example, if the values of dsap and ssap are 0x09 and 0x0a, the value is '090a'.
• ProtocolType: mode-snap
  • ProtocolSubType: etype
  • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5

hwL2VlanProtocolVlanNewRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.1

hwL2VlanProtocolVlanPortNewIndex

Integer32 (1..65535)

not-accessible

This object identifies the index of protocol-based VLAN entries on an interface. The index consists of the interface number and the protocol index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.2

hwL2VlanProtocolVlanPortNewVlanId

Integer32

not-accessible

This object specifies the VLAN ID set in the system view.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.3

hwL2VlanProtocolVlanPortNewProtocolIndex

Integer32

not-accessible

This object identifies the index of the protocol-based VLAN.

The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.4

hwL2VlanProtocolVlanPortNewPriority

Integer32

read-create

This object specifies the 802.1p priority of the VLAN matching the protocol.

The value ranges from 0 to 7.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.5

hwL2VlanProtocolVlanPortNewRowStatus

RowStatus

read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.1

hwL2VlanVoiceVlanPortIndex

Integer32(1..65535)

Not-accessible

The value of this object identifies the index of an interface enabled with voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.2

hwL2VlanVoiceVlanPortEnable

EnabledStatus

Read-write

The value of this object identifies the status of the voice VLAN on an interface.

• 1: enabled

• 2: disabled

By default, the voice VLAN on an interface is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.3

hwL2VlanVoiceVlanPortMode

INTEGER

{

auto (1),

manual (2)

}

Read-write

The value of this object identifies the mode of adding an interface to the voice VLAN.

• 1: autoMode

• 2: manualMode

By default, an interface is added to the voice VLAN in manual mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.4

hwL2VlanVoiceVlanPortLegacy

EnabledStatus

Read-write

The value of this object identifies the status of the voice VLAN Legacy on an interface.

• 1: enabled

• 2: disabled

By default, the voice VLAN Legacy on an interface is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.5

hwL2VlanVoiceVlanPortSecurityMode

INTEGER

Read-write

The value of this object identifies the working mode of a voice VLAN.

• 1: security

• 2: normal

By default, a voice VLAN works in normal mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.6

hwL2VlanVoiceVlanPortModifyPriorityMode

INTEGER

{

modifyPriByVlan (1),

modifyPriByOui (2)

}

read-write

The value of this object identifies the mode for an interface to increase the priority of voice packets.

• 1: Based on VLANs
• 2: Based on MAC addresses

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.1

hwL2VlanVoiceVlanOuiAddress

MacAddress

Not-accessible

This object indicates a MAC address that can be identified by voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.2

hwL2VlanVoiceVlanOuiMask

MacAddress

Not-accessible

This object indicates the mask of a MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.3

hwL2VlanVoiceVlanOuiDescription

OCTET STRING (SIZE(0..80))

Read-create

This object indicates the description of an OUI address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.4

hwL2VlanVoiceVlanOuiRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.1

hwL2VlanPolicyVlanNewMac

MacAddress

Not-accessible

This object indicates the source MAC address that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.2

hwL2VlanPolicyVlanNewIp

IPAddress

Not-accessible

This object indicates the source IP address that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.3

hwL2VlanPolicyVlanNewPort

Integer32

Not-accessible

This object indicates the source port that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.4

hwL2VlanPolicyVlanNewVlanId

VlanId

Not-accessible

This object indicates the ID of a policy VLAN.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.5

hwL2VlanPolicyVlanNewVlanPriority

Integer32(0..7)

Read-create

This object indicates the 802.1p priority of the policy VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.6

hwL2VlanPolicyVlanNewRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1

hwL2QinQVlanIfIndex

InterfaceIndex

Not-accessible

This object indicates an interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2

hwL2QinQVlanIdBegin

VlanId

Not-accessible

This object indicates the start value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3

hwL2QinQVlanIdEnd

VlanId

Not-accessible

This object indicates the end value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4

hwL2QinQVlanInnerVlanIdBegin

VlanIdOrNone

Not-accessible

This object indicates the start value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5

hwL2QinQVlanInnerVlanIdEnd

VlanIdOrNone

Not-accessible

This object indicates the end value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6

hwL2QinQVlan8021pBegin

Integer(0..8)

Not-accessible

This object indicates the start value of the 802.1p priority before tag replacement.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7

hwL2QinQVlan8021pEnd

Integer(0..8)

Not-accessible

This object indicates the end value of the 802.1p priority before tag replacement.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8

hwL2QinQVlanEtherType

Integer(0..65535)

Not-accessible

This object indicates the Ethernet type before tag replacement.

The value of hwL2QinQVlan8021pBegin ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9

hwL2QinQVlanMode

INTEGER

{

stacking(1),

mapping(2),

cosstacking(3),

cosmapping(4),

mapping2to1(5),

mapping2to2(6)

}

Read-create

The value of this object identifies the configuration mode of hwL2QinQVlanTable.

• stacking(1)

  After receiving a tagged frame, an interface adds a tag to the frame according to the carried VLAN ID.

• mapping(2)

  After receiving a tagged frame, an interface maps the carried tag to a specified tag according to the carried VLAN ID.

• mapping2to1(5)

  After receiving a tagged frame, an interface maps the outer tag to a specified tag and transparently transmits the inner tag.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10

hwL2QinQVlanChangedVlanId

VlanId

Read-create

This object indicates the VLAN ID in the outer tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11

hwL2QinQVlanChangedInnerVlanId

VlanIdOrNone

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12

hwL2QinQVlanRemark

Integer(0..8)

Read-create

The value of this object identifies the 802.1p priority after tag replacement.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13

hwL2QinQVlanMapStackVlanId

VlanIdOrNone

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14

hwL2QinQVlanRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.15

hwL2QinQVlanInnerRemark

Integer32(0..8)

read-create

The value of this object identifies changed priority in the inner VLAN tag. No change is needed if the value is 8.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.1

hwL2VlanQinqVlanTransEnaPortIndex

Integer32

Not-accessible

This object indicates the interface index.

The value ranges from 1 to 65535.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.2

hwL2VlanQinqVlanTransEna

EnabledStatus

Read-create

This object indicates the status of the QinQ function. The value is enabled(1) or disabled(2).

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.3

hwL2VlanQinqVlanTransEnaRowStatus

RowStatus

Read-create

This object indicates the row status.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.1

hwL2VlanQinqVlanTransMissDropPortIndex

Integer32

Not-accessible

This object indicates the interface index.

The value ranges from 1 to 65535.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.2

hwL2VlanQinqVlanTransMissDrop

INTEGER { 1: noDrop(1) 2: drop(2) }

Read-create

This object indicates whether to discard the unmatched packets. The value is noDrop(1) or drop(2).

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.3

hwL2VlanQinqVlanTransMissDropRowStatus

RowStatus

Read-create

This object indicates the row status.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.1

hwL2VlanStackingMaskPortIndex

Integer32

not-accessible

This object indicates the index of a Layer 2 interface.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.2

hwL2VlanStackingMaskStackVlanId

Integer32

not-accessible

This object indicates the outer VLAN ID after stacking.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.3

hwL2VlanStackingMaskStack8021p

Integer32

not-accessible

This object indicates the 802.1p priority in the outer VLAN ID after stacking.

The value ranges from 0 to 8. The value 8 is invalid.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.4

hwL2VlanStackingMaskAction

Integer32

not-accessible

The value can be only push(2).

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.5

hwL2VlanStackingMaskDirection

Integer32

not-accessible

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.6

hwL2VlanStackingMaskVlanListLow

Octets

read-create

This object indicates the VLAN range (VLANs 0 to 2047) in the inner VLAN tag before stacking. VLAN 0 is not used.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.7

hwL2VlanStackingMaskVlanListHigh

Octets

read-create

This object indicates the VLAN range (VLANs 2048 to 4095) in the inner VLAN tag before stacking. VLAN 4095 is not used.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.8

hwL2VlanStackingMaskRowStatus

Integer32

read-create

This object indicates the status of the operation row.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.1

hwL2VlanMappingMultiPortIndex

Integer32

not-accessible

This object indicates the index of the Layer 2 interface. The value ranges from 1 to 65535.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.2

hwL2VlanMappingMultiDirection

Integer32

not-accessible

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.3

hwL2VlanMappingMultiVlanId

Integer32

not-accessible

This object indicates the outer VLAN ID after mapping.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.4

hwL2VlanMappingMultiVlan8021p

Integer32

not-accessible

This object indicates the 802.1p priority in the outer VLAN ID after mapping. The value ranges from 0 to 8. The value 8 is invalid.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.5

hwL2VlanMappingMultiVlanListLow

Integer32

read-create

This object indicates the VLAN range (VLANs 0 to 2047) in the inner VLAN tag before mapping. VLAN 0 is not used.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.6

hwL2VlanMappingMultiVlanListHigh

Octets

read-create

This object indicates the VLAN range (VLANs 2048 to 4095) in the inner VLAN tag before mapping. VLAN 4095 is not used.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.7

hwL2VlanStackingMaskRowStatus

Integer32

read-create

This object indicates the status of the operation row.

current

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.1

hwL2VlanMultiVoiceVlanIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface enabled with voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.2

hwL2VlanMultiVoiceVlanPortVLanId

VlanId

Read-create

This object indicates the ID of the voice VLAN.

The value ranges from 2 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.3

hwL2VlanMultiVoiceVlanPortUntagEnable

INTEGER

{

enabled (1),

disabled (2)

}

read-write

The value of this object identifies whether untagged voice service packets can be forwarded in a voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.4

hwL2VlanMultiVoiceVlanPortTag0Enable

INTEGER

{

enabled (1),

disabled (2)

}

read-write

The value of this object identifies whether voice packets carrying VLAN ID 0 can be forwarded in a voice service VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.51

hwL2VlanMultiVoiceVlanPortRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.4.2

hwVcmpServerMacConflict

hwVcmpDeviceMac

This object indicates that multiple servers coexist in the same VCMP domain.

This trap is generated when a VCMP configuration error occurs.

To rectify the fault, configure the devices to ensure that only a single server device exists in the same VCMP domain.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.4.3

hwVcmpRevisionConflict

hwVcmpDeviceMac

After a client sent the server a VCMP request packet due to a restart or a configuration change, the left-most 16 bits in the configuration revision number in a received VCMP packet are the same as that of the local version number, whereas, the right-most 16 bits are greater than the local ones.

After this trap is displayed, VLAN information on the server cannot be sent to the clients in the same VCMP domain.

To rectify the fault, reconfigure the server to ensure that the configurations are complete and correct.

This object is implemented as defined in the corresponding MIB file.