No relevant resource is found in the selected language.
MENU
Support Documentation
S600-E V200R019C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-ETHOAM-MIB

HUAWEI-ETHOAM-MIB

Functions Overview

HUAWEI-ETHOAM-MIB is an integrated MIB.

The OID of root objects is as follows:

iso(1).org(3).dod(6).internet(1). private(4).enterprises(1).huawei(2011).huaweiMgmt(5). hwDatacomm(25).hwEthOam(136)

Relationships Between Tables

None.

Description of Single Objects

hwDot3ahEfmEnabled

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.2.1

hwDot3ahEfmEnabled

EnabledStatus

Read-write

This object indicates that EFM is enabled globally.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

hwDot3ahEfmTable

This table is used to describe the OAM attributes of local Ethernet interfaces.

The index of this table is ifIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.1

hwDot3ahEfmAdminState

EnabledStatus

Read-write

This object indicates the OAM management mode on the interface: enabling and disabling.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

EFM must be enabled globally first.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

EFM must be enabled globally first.

hwDot3ahEfmEventConfigTable

This table is used to manage the configuration of events on the interfaces.

The index of this table is ifIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.1

hwDot3ahEfmErrSymPeriodWindowHi

Unsigned32

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the interval for monitoring error codes. It is represented by the number of frames per unit of time. The default value of the interval for monitoring error codes is one second.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.2

hwDot3ahEfmErrSymPeriodWindowLo

Unsigned32

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the interval for monitoring error codes. It is represented by the number of frames per unit of time. The default value of the interval for monitoring error codes is one second.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.3

hwDot3ahEfmErrSymPeriodThresholdHi

Unsigned32

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the threshold of error codes. The default value is 1. The threshold can be set to 0. At this time, the threshold-crossing alarm is reported periodically. It is used to asynchronously notify the threshold-crossing alarm to the peer.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.4

hwDot3ahEfmErrSymPeriodThresholdLo

Unsigned32

Read-write

This object indicates that the high four bits and low four bits are used together to indicate the threshold of error codes. The default value is 1. The threshold can be set to 0. At this time, the threshold-crossing alarm is reported periodically. It is used to asynchronously notify the threshold-crossing alarm to the peer.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.5

hwDot3ahEfmErrSymPeriodEvNotifEnable

TruthValue

Read-write
This object indicates whether the OAMPD event notification is enabled when the threshold is crossed. The value can be:

  • true

  • false

By default, the value is false.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.9

hwDot3ahEfmErrFrameWindow

Unsigned32

Read-write

This object indicates the monitoring interval. The unit is 100 ms. By default, the value is 10 (1 second).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.10

hwDot3ahEfmErrFrameThresHold

Unsigned32

Read-write

This object indicates that the threshold value, which is 1 by default, can be set to 0. At this time, the threshold-crossing alarm is reported periodically. It is used to asynchronously notify the threshold-crossing alarm to the peer.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.11

hwDot3ahEfmErrFrameEvNotifEnable

TruthValue

Read-write
This object indicates whether the OAMPD event notification is enabled when the threshold is crossed. The value can be:

  • true

  • false

By default, the value is false.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.12

hwDot3ahEfmErrFrameSecsSummaryWindow

Integer32 (100..9000)

Read-write

This object indicates the statistics interval. The unit is 100 ms. By default, the value is 600 (60 seconds). The value ranges from 100 to 9000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.13

hwDot3ahEfmErrFrameSecsSummaryThreshold

Integer32 (0..900)

Read-write

The value ranges from 0 to 900. The default value is 1. It can be set to 0.

It is not recommended to set as zero.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.14

hwDot3ahEfmErrFrameSecsEvNotifEnable

TruthValue

Read-write
This object indicates whether the OAMPD event notification is enabled when the threshold is crossed. The value can be:

  • true

  • false

By default, the value is false.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.18

 hwDot3ahEfmNonThresholdCriticalEventTriggerErrDown

EnabledStatus

read-write
The value of this object identifies whether a criticallink event is associated with an interface. The value can be:

  • enabled: indicates that a criticallink event is associated with an interface. In this case, when EFM OAM detects a criticallink event, the system sets the administrative status of the interface Down.

  • disabled: indicates that a criticallink event is not associated with an interface.

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.19

 hwDot3ahEfmNonThresholdDyinggaspTriggerErrDown

EnabledStatus

read-write
The value of this object identifies whether a dyinggasp event is associated with an interface. The value can be:

  • enabled: indicates that an EFM OAM threshold crossing event is associated with an interface. In this case, when EFM OAM detects a dyinggasp event, the system sets the administrative status of the interface Down.

  • disabled: indicates that a dyinggasp event is not associated with an interface.

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.20

 hwDot3ahEfmNonThresholdLinkFaultTriggerErrDown

EnabledStatus

read-write
The value of this object identifies whether a linkfault event is associated with an interface. The value can be:

  • enabled: indicates that a LinkFault event is associated with an interface. In this case, when EFM OAM detects a linkfault event, the system sets the administrative status of the interface Down.

  • disabled: indicates that a LinkFault event is not associated with an interface.

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.21

 hwDot3ahEfmNonThresholdTimeoutTriggerErrDown

EnabledStatus

read-write
The value of this object identifies whether a timeout event is associated with an interface. The value can be:

  • enabled: indicates that a Timeout event is associated with an interface. In this case, when EFM OAM detects a timeout event, the system sets the administrative status of the interface Down.

  • disabled: indicates that a timeout event is not associated with an interface.

By default, the value is disabled.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The entries in this table can be created only after EFM is enabled globally.

Modification Restriction

The entries in this table can be modified only after EFM is enabled globally.

Deletion Restriction

None.

Access Restriction

The entries in this table can be read only after EFM is enabled globally.

hwDot1agCfmQueryMdIndexTable

This table is used to get the index of the Maintenance Domain table.

The index of this table is hwDot1agCfmQueryMdName.

OID

Object Name

Syntax

Max Access

Description

Access

1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.1

hwDot1agCfmQueryMdName

OCTET STRING (SIZE (1..43))

Not-accessible

This object indicates the name of the Maintenance Domain.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.2

hwDot1agCfmQueryMdIndex

Unsigned32

Read-only

This object indicates the index to the Maintenance Domain table.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

hwDot1agCfmQueryMaIndexTable

This table is used to get the index of the Maintenance Association table.

The index of this table is hwDot1agCfmQueryMdName and hwDot1agCfmQueryMaName.

OID

Object Name

Syntax

Max Access

Description

Access

1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.1

hwDot1agCfmQueryMaName

OCTET STRING (SIZE (1..43))

Not-accessible

This object indicates the name of Maintenance Association.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.2

hwDot1agCfmQueryMaIndex

Unsigned32

Read-only

This object indicates the index to the Maintenance Association table.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

hwCfmVlanOneDelayTrapLogTable

This table is used to query whether the one-way delay exceeds the trap threshold in the VLAN scenario.

The indexes of this table are hwDot1agCfmQueryMdIndex and hwDot1agCfmQueryMaIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.1

hwCfmOneDelayTrapLogMacAddress

MacAddress

Accessible-for-notify

This object indicates the source MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.2

hwCfmVlanOneDelayTrapLogTimestamp

TimeStamp

Accessible-for-notify

This object indicates the timestamp when the one-way delay over the VLAN exceeds the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.3

hwCfmVlanOneDelayTrapLogDelayValue

Unsigned32

Accessible-for-notify

This object indicates the statistics on the one-way delay over the VLAN when a trap is generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.4

hwCfmVlanOneDelayTrapLogThreshold

Unsigned32

Accessible-for-notify

This object indicates the trap threshold for the one-way delay.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table cannot be read.

hwCfmVlanOneDelayRcoverTrapLogTable

This table is used to query whether the one-way delay falls below the trap threshold.

The indexes of this table are hwDot1agCfmQueryMdIndex and hwDot1agCfmQueryMaIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.1

hwCfmOneDelayRecoveryTrapMacAddress

MacAddress

Accessible-for-notify

This object indicates the destination MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.2

hwCfmVlanOneDelayRecoveryTrapLogTimestamp

TimeStamp

Accessible-for-notify

This object indicates the timestamp when the one-way delay over the VLAN reduces below the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.3

hwCfmVlanOneDelayRecoveryTrapLogDelayValue

Unsigned32

Accessible-for-notify

This object indicates the statistics on the one-way delay over the VLAN when a trap is recovered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.4

hwCfmVlanOneDelayRecoveryTrapLogThreshold

Unsigned32

Accessible-for-notify

This object indicates the trap threshold for the one-way delay.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table cannot be read.

hwCfmVlanTwoDelayTrapLogTable

This table is used to query whether the two-way delay exceeds the trap threshold in the VLAN scenario.

The indexes of this table are hwDot1agCfmQueryMdIndex and hwDot1agCfmQueryMaIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.1

hwCfmTwoDelayTrapMacAddress

MacAddress

Accessible-for-notify

This object indicates the source MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.2

hwCfmVlanTwoDelayTrapLogTimestamp

TimeStamp

Accessible-for-notify

This object indicates the timestamp when the two-way delay over the VLAN exceeds the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.3

hwCfmVlanTwoDelayTrapLogDelayValue

Unsigned32

Accessible-for-notify

This object indicates the statistics on the two-way delay over the VLAN when a trap is generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.4

hwCfmVlanTwoDelayTrapLogThreshold

Unsigned32

Accessible-for-notify

This object indicates the statistics on the two-way delay over the VLAN when a trap is recovered.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table cannot be read.

hwCfmVlanTwoDelayRcoverTrapLogTable

This table is used to query whether the two-way delay falls below the trap threshold.

The indexes of this table are hwDot1agCfmQueryMdIndex and hwDot1agCfmQueryMaIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.1

hwCfmTwoDelayRecoveryTrapMacAddress

MacAddress

Accessible-for-notify

This object indicates the destination MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.2

hwCfmVlanTwoDelayRecoveryTrapLogTimestamp

TimeStamp

Accessible-for-notify

This object indicates the timestamp when the two-way delay over the VLAN reduces below the configured trap threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.3

hwCfmVlanTwoDelayRecoveryTrapLogDelayValue

Unsigned32

Accessible-for-notify

This object indicates the statistics on the two-way delay when a trap is recovered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.4

hwCfmVlanTwoDelayRecoveryTrapLogThreshold

Unsigned32

Accessible-for-notify

This object indicates the trap threshold for the two-way delay.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table cannot be read.

hwY1731BaseConfigTable

This table is used to configure the threshold for one-way or two-way delay measurement.

The indexes of this table are hwDot1agCfmQueryMdIndex and hwDot1agCfmQueryMaIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.2

hwY1731OneDelayThreshold

Unsigned32

Read-write

This object indicates the threshold for one-way delay measurement.

If hwY1731OneDelayThreshold is set to 0, the default alarm threshold of the one-way frame delay is used. By default, no alarm threshold of the one-way frame delay is set.

Currently, the threshold can be set only when one-way delay measurement is configured in a VLAN.

1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.3

hwY1731TwoDelayThreshold

Unsigned32

Read-write

This object indicates the threshold for two-way delay measurement.

If hwY1731TwoDelayThreshold is set to 0, the default alarm threshold of the two-way frame delay is used. By default, no alarm threshold of the two-way frame delay is set.

Currently, the threshold can be set only when two-way delay measurement is configured in a VLAN.

Creation Restriction

No entry can be created in this table.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

hwY1731ConfigTable

This table is used to configure the functions such as single-ended frame loss measurement, one-way frame delay measurement, and two-way delay measurement.

The indexes of this table are hwDot1agCfmQueryMdIndex, hwDot1agCfmQueryMaIndex, hwY1731RemoteIp, hwY1731VcId, hwY1731MacAddress, and hwY1731ResvIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.1

hwY1731RemoteIp

IpAddress

Not-accessible

This object indicates the IP address of the peer device. The value is set only in the case of an inward-facing MEP in a VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.2

hwY1731VcId

Unsigned32

Not-accessible

This object indicates the VC ID of the peer device. The value is set only in the case of an inward-facing MEP in a VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.3

hwY1731MacAddress

MacAddress

Not-accessible

This object indicates the MAC address of the peer device. The value is not required currently.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.4

hwY1731ResvIndex

Integer32

Not-accessible

This object indicates the preserved index value. The value is not required currently.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.5

hwY1731ServiceType

INTEGER

{

vlan(1),

vsi(2),

vll(3),

unknown(4)

unbind(5),

}

Read-only

The value of this object identifies the service type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.7

hwY1731OneDelayRecvEnable

EnabledStatus

Read-create

This object indicates whether the 1DM receiving function is enabled on the local MEP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.8

hwY1731OneDelayRecvEnableIsContinue

TruthValue

Read-create

This object indicates whether 1DM frames to be received by the local MEP are sent during proactive one-way frame delay measurement.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.9

hwY1731TwoDelayRecvEnable

EnabledStatus

Read-create

This object indicates whether the 2DM receiving function is enabled on the local MEP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.15

hwY1731SingleLossMacAddress

MacAddress

Read-create

This object indicates the MAC address of the peer device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.22

hwY1731OneDelayEnable

EnabledStatus

Read-create

This object indicates whether one-way frame delay measurement is configured in the MA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.23

hwY1731OneDelayIsContinue

TruthValue

Read-create

This object indicates whether proactive one-way frame delay measurement is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.24

hwY1731OneDelayMepId

Integer32

(0 | 1..8191)

Read-create

This object indicates the MEP ID obtained by proactive one-way frame delay measurement. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.25

hwY1731OneDelayDestIsMepId

TruthValue

Read-create

This object indicates whether one-way frame delay measurement specifies the remote MEP ID as the destination.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.26

hwY1731OneDelayDestMepId

Integer32 (0 | 1..8191)

Read-create

This object indicates the remote MEP ID specified by one-way frame delay measurement. The value is 0 or ranges from 1 to 8191. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.27

hwY1731OneDelayMacAddress

MacAddress

Read-create

This object indicates the MAC address of the peer remote MEP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.28

hwY1731OneDelayInterval

INTEGER

{

invalid(1),

interval1s(2),

interval10s(3)

interval30s(4)

interval60s(5)

interval150s(6)

interval300s(7)

}

Read-create
The value of this object identifies the interval at which DMMs are sent.

  • invalid: indicates the invalid value.

  • interval1s: indicates that DMMs are sent at an interval of 1s.

  • interval10s: indicates that DMMs are sent at an interval of 10s.

  • interval30s: indicates that DMMs are sent at an interval of 30s.

  • interval60s: indicates that DMMs are sent at an interval of 60s.
  • interval150s: indicates that DMMs are sent at an interval of 150s.
  • interval300s: indicates that DMMs are sent at an interval of 300s.
When on-demand one-way frame delay measurement is performed, the value is 1s or 10s; when proactive one-way frame delay measurement is performed, the value is 1s, 10s, 30s, 60s, 150s, 300s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.29

hwY1731OneDelayCount

Integer32

(0 | 1..60)

Read-create

This object indicates the number of sent DMMs. This value is set only when on-demand one-way frame delay measurement is performed. When proactive one-way frame delay measurement is implemented, the value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.31

hwY1731TwoDelayEnable

EnabledStatus

Read-create

This object indicates whether two-way frame delay measurement is configured on the MA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.32

hwY1731TwoDelayIsContinue

TruthValue

Read-create

This object indicates whether proactive two-way frame delay measurement is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.33

hwY1731TwoDelayMepId

Integer32

(0 | 1..8191)

Read-create

This object indicates the MEP ID specified for two-way frame delay measurement. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.34

hwY1731TwoDelayDestIsMepId

TruthValue

Read-create

This object indicates whether two-way frame delay measurement specifies the remote MEP ID as the destination.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.35

hwY1731TwoDelayDestMepId

Integer32

(0 | 1..8191)

Read-create

This object indicates the remote MEP ID specified by two-way frame delay measurement. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.36

hwY1731TwoDelayMacAddress

MacAddress

Read-create

This object indicates the destination MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.37

hwY1731TwoDelayInterval

INTEGER

{

invalid(1),

interval1s(2),

interval10s(3),

interval30s(4)

interval60s(5)

interval150s(6)

interval300s(7)

}

Read-create
The value of this object identifies the interval at which DMMs are sent. The value is one of the following:

  • invalid: indicates the invalid value.

  • interval1s: indicates that DMMs are sent at an interval of 1s.

  • interval10s: indicates that DMMs are sent at an interval of 10s.

  • interval30s: indicates that DMMs are sent at an interval of 30s.

  • interval60s: indicates that DMMs are sent at an interval of 60s.
  • interval150s: indicates that DMMs are sent at an interval of 150s.
  • interval300s: indicates that DMMs are sent at an interval of 300s.
When on-demand two-way frame delay measurement is performed, the value is 1s or 10s; when proactive two-way frame delay measurement is performed, the value is 1s, 10s, 30s, 60s, 150s, 300s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.38

hwY1731TwoDelayCount

Integer32

(0 | 1..60)

Read-create

This object indicates the number of sent DMMs. This value is set only when on-demand two-way frame delay measurement is performed. When proactive two-way frame delay measurement is implemented, the value is 0.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The object hwY1731SingleLossEnable, hwY1731DualLossEnable, hwY1731OneDelayEnable, hwY1731TwoDelayEnable, hwY1731SingleLossRecvEnable, hwY1731OneDelayRecvEnable and hwY1731TwoDelayRecvEnable cannot be created at the same time.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

hwY1731ResetStatisticTable

hwY1731ResetStatisticTable is used to clear corresponding statistics.

The indexes of this table are hwDot1agCfmQueryMdIndex, hwDot1agCfmQueryMaIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1.1

hwY1731ResetStatisticType

INTEGER

{

invalid(1),

singleloss(2),

dualloss(3),

onewaydelay(4),

twowaydelay(5)

}

Read-write
The value of this object identifies the type of statistics to be cleared.

  • invalid: indicates that the measurement is invalid.

  • singleloss: clears single-ended frame loss statistics.

  • onewaydelay: clears the statistics about one-way frame delay.

  • twowaydelay: clears the statistics about two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The statistics about frame loss and frame delay must exist when this table is modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

hwY1731StatisticTable

hwY1731StatisticTable is used to display statistics about single-ended frame loss, one-way frame delay, and two-way frame delay.

The indexes of this table are hwDot1agCfmQueryMdIndex, hwDot1agCfmQueryMaIndex.

This table can be used to query Y.1731 on-demand and proactive measurement statistics.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.12

hwY1731OneDelayStatistic

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the statistics about one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.13

hwY1731OneDelayVariation

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the jitter statistics about one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.14

hwY1731OneDelayMax

Unsigned32

Read-only

This object indicates the maximum one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.15

hwY1731OneDelayMin

Unsigned32

Read-only

This object indicates the minimum one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.16

hwY1731OneDelayAvg

Unsigned32

Read-only

This object indicates the average one-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.17

hwY1731TwoDelayStatistic

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the statistics about two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.18

hwY1731TwoDelayVariation

OCTET STRING

(SIZE(0..1024))

Read-only

This object indicates the jitter statistics about two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.19

hwY1731TwoDelayMax

Unsigned32

Read-only

This object indicates the maximum two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.20

hwY1731TwoDelayMin

Unsigned32

Read-only

This object indicates the minimum two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.21

hwY1731TwoDelayAvg

Unsigned32

Read-only

This object indicates the average two-way frame delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.38

 hwY1731OneDelayOnDemandStartTime DateAndTime

Read-only

This object indicates the date and time when on-demand one-way delay measurement starts.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.39

 hwY1731TwoDelayOnDemandStartTime DateAndTime

Read-only

This object indicates the date and time when on-demand two-way delay measurement starts.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The statistics about frame loss and delay must exist when this table is accessed.

Description of Alarm Objects

hwDot3ahEfmThresholdEvent

OID

Object Name

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.4

hwDot3ahEfmThresholdEvent

  • hwDot3ahEfmEventLogTimestamp

  • hwDot3ahEfmEventLogOui

  • hwDot3ahEfmEventLogType

  • hwDot3ahEfmEventLogLocation

  • hwDot3ahEfmEventLogWindowHi

  • hwDot3ahEfmEventLogWindowLo

  • hwDot3ahEfmEventLogThresholdHi

  • hwDot3ahEfmEventLogThresholdLo

  • hwDot3ahEfmEventLogValue

  • hwDot3ahEfmEventLogRunningTotal

  • hwDot3ahEfmEventLogEventTotal

This object indicates threshold exceeding events.

This object is implemented as defined in the corresponding MIB files.

hwDot3ahEfmNonthresholdEvent

OID

Object Name

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.5

hwDot3ahEfmNonThresholdEvent

  • hwDot3ahEfmEventLogTimestamp

  • hwDot3ahEfmEventLogOui

  • hwDot3ahEfmEventLogType

  • hwDot3ahEfmEventLogLocation

This object indicates non-threshold exceeding event. Such as LinkFault, DyingGaspEvent, Critical and LostLinkEvent.

This object is implemented as defined in the corresponding MIB files.

hwDot3ahEfmNonThresholdRecovery

OID

Object Name

Bound Variable

Description

Implementation Specification

1.3.6.1.4.1.2011.5.25.136.1.6.17

hwDot3ahEfmNonThresholdRecovery

  • hwDot3ahEfmEventLogTimestamp

  • hwDot3ahEfmEventLogOui

  • hwDot3ahEfmEventLogType

  • hwDot3ahEfmEventLogLocation

The recovery of the faulty link.

This object is implemented as defined in the corresponding MIB files.

hwDot3ahEfmLoopbackFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.29

hwDot3ahEfmLoopbackFailed

  • ifDescr

Interface starts loopback failed.

This object is implemented as defined in the corresponding MIB file.

hwDot3ahEfmRemoteDyingGaspEvent

OID

Object Name

Bound Variable

Description

Implementation Specification

1.3.6.1.4.1.2011.5.25.136.1.6.8

hwDot3ahEfmRemoteDyingGaspEvent

  • hwDot3ahEfmPeerMacAddress

  • ifDescr

An unrecoverable event occurs, for example, the system or a board restarts, or the device is powered off.

This object is implemented as defined in the corresponding MIB files.

hwCfmVlanOnewayDelay

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.23

hwCfmVlanOnewayDelay

  • hwCfmOneDelayTrapLogMacAddress

  • hwCfmVlanOneDelayTrapLogTimestamp

  • hwCfmVlanOneDelayTrapLogDelayValue

  • hwCfmVlanOneDelayTrapLogThreshold

In the VLAN networking, the one-way delay exceeded the trap threshold.

This object is implemented as defined in the corresponding MIB files.

hwCfmVlanOnewayDelayRecovery

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.24

hwCfmVlanOnewayDelayRecovery

  • hwCfmOneDelayRecoveryTrapMacAddress

  • hwCfmVlanOneDelayRecoveryTrapLogTimestamp

  • hwCfmVlanOneDelayRecoveryTrapLogDelayValue

  • hwCfmVlanOneDelayRecoveryTrapLogThreshold

In the VLAN networking, the one-way delay fell below the trap threshold.

This object is implemented as defined in the corresponding MIB files.

hwCfmVlanTwowayDelay

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.25

hwCfmVlanTwowayDelay

  • hwCfmTwoDelayTrapMacAddress

  • hwCfmVlanTwoDelayTrapLogTimestamp

  • hwCfmVlanTwoDelayTrapLogDelayValue

  • hwCfmVlanTwoDelayTrapLogThreshold

In the VLAN networking, the two-way delay exceeded the trap threshold.

This object is implemented as defined in the corresponding MIB files.

hwCfmVlanTwowayDelayRecovery

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.26

hwCfmVlanTwowayDelayRecovery

  • hwCfmTwoDelayRecoveryTrapMacAddress

  • hwCfmVlanTwoDelayRecoveryTrapLogTimestamp

  • hwCfmVlanTwoDelayRecoveryTrapLogDelayValue

  • hwCfmVlanTwoDelayRecoveryTrapLogThreshold

In the VLAN networking, the two-way delay fell below the trap threshold.

This object is implemented as defined in the corresponding MIB files.

hwDot1agCfmMismerge

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.34

hwDot1agCfmMismerge

None.

A trap about MD or MA name inconsistency is received in the scenario where the MEP and RMEP have the same MD level.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmMismergeCleared

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.35

hwDot1agCfmMismergeCleared

None.

A trap about MD or MA name inconsistency is cleared in the scenario where the MEP and RMEP have the same MD level.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmUnexpectedMEP

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.36

hwDot1agCfmUnexpectedMEP

None.

A trap about a nonexistence MEP ID in the RMEP list is received in the scenario where the MEP and RMEP have the same MD level and MA ID.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmUnexpectedMEPCleared

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.37

hwDot1agCfmUnexpectedMEPCleared

None.

A trap about nonexistence MEP ID in the RMEP list is cleared in the scenario where the MEP and RMEP have the same MD level and MA ID.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmUnexpectedPeriod

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.38

hwDot1agCfmUnexpectedPeriod

None.
A trap about CCM interval inconsistency is received under the following conditions:

  • The MEP and RMEP have the same MD level.

  • The MEP and RMEP have the same MA ID.

  • The MEP ID carried in the received CCMs is listed in the RMEP list on the MEP.

  • The MEP is enabled to receive CCMs.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmUnexpectedPeriodCleared

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.39

hwDot1agCfmUnexpectedPeriodCleared

None.
A trap about CCM interval inconsistency is cleared under the following conditions:

  • The MEP and RMEP have the same MD level.

  • The MEP and RMEP have the same MA ID.

  • The MEP ID carried in the received CCMs is listed in the RMEP list on the MEP.

  • The MEP is enabled to receive CCMs.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmUnexpectedMAC

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.40

hwDot1agCfmUnexpectedMAC

None.
A trap about RMEP's MAC address inconsistency is received under the following conditions:

  • The MEP and RMEP have the same MD level.

  • The MEP and RMEP have the same MA ID.

  • The MEP ID carried in the received CCMs is listed in the RMEP list on the MEP.

  • The MEP is enabled to receive CCMs.

  • The MEP and RMEP had the same interval at which CCMs are sent.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmUnexpectedMACCleared

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.41

hwDot1agCfmUnexpectedMACCleared

None.
A trap about inconsistency between RMEP's MAC address specified on an MEP and the MAC address of the RMEP is cleared under the following conditions:

  • The MEP and RMEP have the same MD level.

  • The MEP and RMEP have the same MA ID.

  • The MEP ID carried in the received CCMs is listed in the RMEP list on the MEP.

  • The MEP is enabled to receive CCMs.

  • The MEP and RMEP had the same interval at which CCMs are sent.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmLOC

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.42

hwDot1agCfmLOC

None.

A trap is reported after the MEP does not receive a CCM within a period of time 3.5 times the interval at which CCMs are sent.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmLOCCleared

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.43

hwDot1agCfmLOCCleared

None.

A trap is cleared after the MEP receives a CCM within a period of time 3.5 times the interval at which CCMs are sent.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmRDI

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.46

hwDot1agCfmRDI

None.

A MEP receives a CCM carrying an RDI flag with the value of 1.

This object is implemented as defined in the corresponding MIB file.

hwDot1agCfmRDICleared

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.136.1.6.47

hwDot1agCfmRDICleared

None.

A MEP receives a CCM carrying an RDI flag with the values of 0.

This object is implemented as defined in the corresponding MIB file.

Objects Not Supported by the Device

The functions of the following objects are not supported on the device. Therefore, do not use these objects to maintain the device.

Table 38-1 List of objects not supported by the device

Object OID

 Object Name

Table to Which the Object Belongs

1.3.6.1.4.1.2011.5.25.136.1.6.44

hwDot1agCfmExceptionalMACStatus

An alarm object

1.3.6.1.4.1.2011.5.25.136.1.6.45

hwDot1agCfmExceptionalMACStatusCleared

An alarm object

1.3.6.1.4.1.2011.5.25.136.1.6.32

hwDot1agCfmUnexpectedMEGLevel

An alarm object

1.3.6.1.4.1.2011.5.25.136.1.6.33

hwDot1agCfmUnexpectedMEGLevelCleared

An alarm object
Translation
简体中文
Download
Updated: 2020-10-20

Document ID: EDOC1100127211

Views: 7870

Downloads: 6

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :