Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power status
Context
For a non-PoE device that provides only internal power modules, the Power status section is not displayed on the Monitor page. If the device does not support PoE power supply, total available PoE power and total PoE output power are not displayed in the Power status section.
Procedure
- Click Monitoring to open the Monitoring page, and click
on the left of Interface Bandwidth Utilization, Log, Alarm, etc. The Power Status is displayed, as shown in Figure 4-11.
on
the left of 
