Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LLDP
Context
To view the Layer 2 link status between network devices and analyze the network topology, enable Link Layer Discovery Protocol (LLDP).
Procedure
- Choose to display the LLDP configuration page, as shown in Figure 5-87.
- Set Global LLDP status to ON so that LLDP is enabled on all interfaces.
- Select the interfaces that you want to configure.
Use any of the following methods to select interfaces:
- Click interface icons to select one or more interfaces.
- Drag the mouse to select multiple adjacent interfaces.
- Select the check box of the panel to select all interfaces on the panel.
- Click Enable LLDP On Port or Disable LLDP On Port to enable or disable LLDP on the selected interfaces. Click Refresh to refresh information about neighbors of the selected interfaces.
