Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Electronic Label
Procedure
- Choose to access the Electronic Label page, as shown in Figure 7-36.
Table 7-17 describes the parameters on the page.Table 7-17 Parameters on the Electronic Label page
Item
Description
Slot ID
The slot where the switch is located.
BoardType
Board model of the specified component.
BarCode
Bar code of the specified component.
Item
BOM code of the specified component.
Description
English description of the specified component.
Manufactured
Production date of the specified component.
VendorName
Vendor name of the specified component.
IssueNumber
Issuing number of the specified component.
CLEICode
CLEI code of the specified component.
BOM
Sales BOM code of the specified component.
