Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing the PoE SPD
- Loosen the nuts (do not remove the nuts) on the PoE SPD mounting board.
- Replace and secure the PoE SPD mounting bracket.
- Connect one end of the ground cable to the PE point on the PoE SPD, and secure the ground nut.
- Place the PoE SPD in the mounting bracket. Ensure that the PE point faces upwards and the surface marked PE faces outwards.
- Secure the PoE SPD fastener.
- Connect the other end of the ground cable to the PE bar.Figure 4-14 Installing a PoE SPD
