Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing the SmartModule
- Remove the mounting ears and guide rail–mounting bracket from the SmartModule.
- Remove the panel at the position where the SmartModule is to be installed from the cabinet and take out the mounting bracket.
- Secure the mounting bracket to the SmartModule.
- Install the SmartModule.Figure 4-8 Installing a SmartModule
- Connect the GE4 port on the SmartModule to the LAN port on the SmartLogger using the network cable delivered with the SmartModule.
- Connect the preinstalled RS485 cable to the COM port on the SmartModule based on the label.
- Connect the preinstalled power cable to the 12V 1A port on the SmartModule based on the cable label.Figure 4-9 Connecting cables
