Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting the 4G LTE Cable (Without a PoE SPD)
- Connect the factory-installed network cable on the SmartLogger to the DATA port on the PoE module.
- Connect the factory-installed power cables on the SmartLogger to the PoE module.Figure 5-14 Connecting cables to a PoE module
- Connect the network cable delivered with the CPE to the POE port on the PoE module.Figure 5-15 Connecting a CPE network cable
